Sal, Can we get CPM 15v?
- Deadboxhero
- Member
- Posts: 2179
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Sal, Can we get CPM 15v?
I like this steel. It's easier to work with then Maxamet and Rex121
Takes a killer edge and seems to be more stable then s110v.
Heat treatment
1530f preheat 5min
2150f Austenizing for 10min
Plate quench
Immediate Cryo 4 hours (no snap temper)
3x tempers at 1000f for 2 hours.
I got 64.5rc
Using Larrin's Catra predicting Formula
-−157+15.8×64.5−17.8×30+26.2×23
930 Predicted Total cards cut with 64.5 rc with a 15dps, 30 inclusive angle
I'm closer to 12dps in the video.
That would increase TCC to 1037!
S90v by comparison is
−157+15.8×59−17.8×30+26.2×9+14.6×13
666 TCC with a 59rc and 30 inclusive angle.
682 at 60rc
Takes a killer edge and seems to be more stable then s110v.
Heat treatment
1530f preheat 5min
2150f Austenizing for 10min
Plate quench
Immediate Cryo 4 hours (no snap temper)
3x tempers at 1000f for 2 hours.
I got 64.5rc
Using Larrin's Catra predicting Formula
-−157+15.8×64.5−17.8×30+26.2×23
930 Predicted Total cards cut with 64.5 rc with a 15dps, 30 inclusive angle
I'm closer to 12dps in the video.
That would increase TCC to 1037!
S90v by comparison is
−157+15.8×59−17.8×30+26.2×9+14.6×13
666 TCC with a 59rc and 30 inclusive angle.
682 at 60rc
- Deadboxhero
- Member
- Posts: 2179
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
I'd be down.
- legOFwhat?
- Member
- Posts: 3158
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: Sal, Can we get CPM 15v?
Would make a great mule?
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
- Liquid Cobra
- Member
- Posts: 6492
- Joined: Wed Jan 02, 2013 11:38 pm
- Location: British Columbia, CANADA
Re: Sal, Can we get CPM 15v?
Throw it on a ukpk as a test.
Most recently acquired: Military 2, Paramilitary 2 Tanto x2, YoJUMBO, Swayback, Siren, DLC Yojimbo 2, Native Chief, Shaman S90V, Para 3 LW, Ikuchi, UKPK, Smock, SUBVERT, Amalgam, Para 3 CTS-XHP, Kapara, Paramilitary 2 M390
Grail Paramilitary 2 M390 X 2! ACHIEVED!!
For more of my pictures see my Instagram account.
@liquid_cobra
Grail Paramilitary 2 M390 X 2! ACHIEVED!!
For more of my pictures see my Instagram account.
@liquid_cobra
- Doc Dan
- Member
- Posts: 14949
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Sal, Can we get CPM 15v?
Put it in an Urban LW. I'd love to get some and use it.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
- bearfacedkiller
- Member
- Posts: 11418
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Sal, Can we get CPM 15v?
Sign me up!
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: Sal, Can we get CPM 15v?
I'll chime in again with a request for a UKPK based "mule" program, using small folding blades as the test run instead of mules, so more people can carry and use them. :)
-
- Member
- Posts: 5860
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: Sal, Can we get CPM 15v?
Count me in!
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
Re: Sal, Can we get CPM 15v?
Let's do this!
-
- Member
- Posts: 175
- Joined: Wed Dec 31, 2014 11:58 am
Re: Sal, Can we get CPM 15v?
I think 4V might be my max.
Re: Sal, Can we get CPM 15v?
You guys are crazy. But with Spyderco anything is possible.
http://www.KnifeSteelNerds.com - Steel Metallurgy topics related to knives
Re: Sal, Can we get CPM 15v?
True and true.
REX 121 next! Lol
Re: Sal, Can we get CPM 15v?
I'm in for a Millie!
A day without laughter is a day wasted. ~ Charlie Chaplin
- Deadboxhero
- Member
- Posts: 2179
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
Sal, is this a possibility for 2020?
Para 3, PM2 and Military?
Para 3, PM2 and Military?
- Naperville
- Member
- Posts: 4513
- Joined: Sun Feb 04, 2018 2:58 am
- Location: Illinois, USA
Re: Sal, Can we get CPM 15v?
CPM 14.9V is my limit! :D
Looks pretty weak on the toughness scale. Can you tell us what other steels rank similarly in toughness?
Looks pretty weak on the toughness scale. Can you tell us what other steels rank similarly in toughness?
I support the 2nd Amendment Organizations of GOA, NRA, FPC, SAF, and "Knife Rights"
T2T: https://tunnel2towers.org; Special Operations Wounded Warriors: https://sowwcharity.com/
T2T: https://tunnel2towers.org; Special Operations Wounded Warriors: https://sowwcharity.com/
- knivesandbooks
- Member
- Posts: 1455
- Joined: Tue Aug 15, 2017 8:43 pm
- Location: Tulsa, OK
Re: Sal, Can we get CPM 15v?
Toss it in a native 5 and manix lw
Christ is risen from the dead, trampling down death by death, and on those in the tombs bestowing life!
- Deadboxhero
- Member
- Posts: 2179
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
Anything with that much alloy won't be tough. It's ranks simliar to other high alloy steels.Naperville wrote: ↑Wed Nov 28, 2018 5:24 pmCPM 14.9V is my limit! :D
Looks pretty weak on the toughness scale. Can you tell us what other steels rank similarly in toughness?
S125v
Maxamet
Rex121
All the big dawgs
- bearfacedkiller
- Member
- Posts: 11418
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Sal, Can we get CPM 15v?
Maybe some HAP72 and S390 too?
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: Sal, Can we get CPM 15v?
Lets do this! Something with a thin blade though, Wharndelica would be my pick.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal