Spyderco Forums

Many of you seem to have very clear and elaborated opinions on (quite many) different steels, in respect to parameters like edge holding, sharpenability, even on very detailled aspects like if a steel looses a scary sharp edge rather quickly but keeps a...

OK guys, we are doing really well on the blade shape poll, so thank you everyone who has put in their vote.
If you haven't been over there, please head on over and vote.

While that is running, can we all put in a suggestion for the handle...

:D

Now that the MT is officially not DEAD and in the new Reveal, my eagerness meter is the red. Of all my mules only 2 are stainless and both are non-users because of the handles I've put on them, so I can't wait to get hold of this SPY27 MT and put it to...

I want to congratulate the Spyderco team on another knife done well. As expected, of course.

The Tenacious Lightweight is a flawless update to a classic. This is a knife meant to WORK.

The FRN is nicely rounded, grippy as always but not sharp, and I...

Today for me it the G-10 Cat!! John

If this is a duplicate thread.. Please delete..

Hey guys I just joined! I’m gonna be getting my fifth Spyderco next week. It’s a Pm2 s110v. I’m super excited. The original pm2 is pretty widely regarded as one of the best edc knives available. My question is does the s110v take away some the hard use...

As an early adopter of the Native Chief, i am really excited that we will see two sprints this year. Hopefully we will also see some other exclusives and more sprints.

I have been angling for an LC200N Salt version (SE and PE) as well as (and maybe...

Has anyone seen this knife in stock anywhere? I know it is discontinued, just surprised I can't find one.

Yojimbo 2 came today! First impressions, very light and easy to carry. Disappears in the pocket. I do have a trainer on the way as well. I remember someone on a recent post was asking to see the Yojimbo 2 next to the Ronin 2 so I took a few quick photos.

Has event branded Spydercos been discussed here before? If so what was the consensus among users? What did Spyderco have to say about it?

Is this something people would be interested in?

I attend the Denver National Western Stock Show annually and...

Sources: Spyderco Product Guide & Reveals, SHOT Show, BLADE Show, Amsterdam Meet, SpydieWiki, Dealer Websites and various online forums.

Only new Spyderco knife models are listed (accessories, sharpners, trainers and Byrd knives are excluded) and...

How about we move the general discussion / support conversations off of the Alert thread over to this thread... I think those who are subscribed to the alerts thread will fair better in finding/getting one...

Cheers,

John

Sal:

What are we looking at here in this photo? Is is some kind of early form of the Sharpmaker, or it it something else? I can see the edges of some brown ceramic rods.

Thanks.

So, long story short: I really wanted Cru-Wear Micarta Proficient, but after thinking about it, the price is going to be too high for me. I have my own midset about fixed blade and the price that I want to pay for it.

So, I am going to start this new...

I had set about building a collection of M4 DLC Jade which I intended to transform into what I call Project Obsidian. As a kid, I loved collecting the so called “Apache Tears” rocks, obsidian rocks, that were nearly black unless looked at with a light...

Has anyone here tried to re-finish their sharpmaker rods?

I purchased a pocket medium stone and noticed the surface was much coarser than my medium rods.

Out of curiosity I ordered a new set of medium rods and fine rods for my sharpmaker and...

Well, maybe not really a fighting knife unless you want to argue about who gets to open the beer. For years I campaigned for a knife with a bottle opener; a real knife like a Spyderco with a 3.5 inch blade, the opening hole and the pocket clip....

Who would be up for this?

A Spyderco Stretch with LC200N steel blade, Full Flat Grind, in both plain and serrated edges, with Navy Blue tone FRN scales, and the new Fish-Scale Pattern Fiberglass Reinforced Nylon Scales, and the Back Lock as it has now....

Well, I feel like a little kid right now just waiting for Santa, in this case the Mail person. I am waiting on 3 Spydercos: a Delica super blue, Cat G10, and Pacific salt spyderedge. What's in the mail on your side of the woods?

I have a bottle of KPL with a nice little thin nozzle, but I actually can't find a good angle to get any lube down on the washers themselves. I could maybe put some lube in the pivot screw holes that might seep into the washers, but then I would be...

Got the sharpmarker, tested it on my kitchen knife first. I noticed since I am right-handed, the left stroke of the stone is more cleaner than my right stroke of the stone. The right comes more at an angle. I also noticed that I rounded the tip really...

So my question for Dodo users is how is the overall cutting experience compared to something like a Lil' Matriarch, and if you happen to own a PE & SE, which do you prefer and why. I'm trying to decide if my first should be a SE or a PE. TIA!...

Share the crazy good deals on Spyderco products that you find here!

Kristi

Hello all - I've been absent from these forums for a while. I be bitten again by the spyder during the covid shutdown and have re-kindled my interest. The potential for a Reinhold / Spyderco Joule collab has gotten my attention. I've seen some older posts...

What a nice surprise, my local shop received some Yojumbo’s today! Needless to say I immediately added them to cart and now I will stalk my mail carrier until it arrives.

I was pretty shocked as I hadn’t heard anything about this knife being released...

As I've been promising for some time now, I've decided to start a thread outlining the different varieties of the Spyderco Model C09 CoPilot (both production varieties and after-market embellished versions). This thread will be a work in progress and I...

So S30V gets picked on a lot bc it's not the latest and greatest... Feel free to share your support for the vanilla ice cream of steels.

Reasons why I don't hate S30V:
Cheaper than some other steels
Easy to sharpen
Corrosion resistant enough for me...

I've made no secret of the fact I like medium to big sized knives. The M2 and M2XL are my favorites, and I've been carrying a Native 5 LW when I'm slumming it. But... I ride mountain bikes, where hauling around extra junk can move you from First Place to...

Been a wild last month with some great buys. What’s the next hyped knife to look out for so we can begin budgeting? :D

Hello,

I am a new member. I've lurked for a while and have enjoyed the expertise and experience that members share on this board. I was curious if anyone had a similar experience with LC200N:

I recently bought a spydiechef new. I noticed that LC200N...

I didn't see an alert thread for this guy yet so wanted to start it up. Alert threads have always been way better for me to actually snag a sprint than in-stock notifications or blind luck. I haven't been able to pull the trigger on a chief yet, but the...

I know a lot of us have been anticipating the Slysz Swayback for a long time. If you see them dropping somewhere please give us a heads up here

I have been extremely happy with the Spyderco brand, and was wondering if there have been any previous models that would be a great survival knife? I have checked the current catalogue and googled previous models but cannot find anything to suit my needs....

Being a UK resident, and not wishing to get hauled up in front of a judge, my best option is pretty much a Spyderco UKPK.

I have a couple, and am very much looking forward to the arrival of the HH edition; I have been on the waiting list since late...

Southard:
Love the CTS204P