Yojimbo 2 lock is sticking.
Yojimbo 2 lock is sticking.
My Yojimbo 2 blade was tight to open so I sprayed some oil and loosened the pivot screw. Now when I close it the lock sticks, it never stuck like that before moving the pivot screw. So did I make the compression lock bar slide further into the knife by loosening the blade and adding oil?
-
ii_pennies
- Member
- Posts: 15
- Joined: Tue May 10, 2016 6:23 pm
Re: Yojimbo 2 lock is sticking.
Make sure there is no oil in the lock area and on the lockbar
-
farnorthdan
- Member
- Posts: 4409
- Joined: Wed Apr 02, 2014 11:32 pm
Re: Yojimbo 2 lock is sticking.
You could also try loosening the stop pin and rotating it a wee bit.
Happy to be part of this great forum and group of down to earth spyderco addicts, Thanks Sal and gang.
My Grails: Lum Tanto folder sprint, Sprint Persian(red), Captain, Manix 2 (M4), SB MT, PM2 M390, CF dodo, Manix2 (CF S90V),Manix2 XL S90V, Zowada CF Balance Rassenti Nivarna, Lil' Nilakka, Tuff, Police 4, Chinook 4, Caly HAP40 52100 Military, S110V Military, Any/All PM2 & Military sprints/exclusives I can get my grubby hands on :) :spyder: :) :spyder: :)
"We may look curious, homely, whatever, but we'll never be called unusable or undependable."
My Grails: Lum Tanto folder sprint, Sprint Persian(red), Captain, Manix 2 (M4), SB MT, PM2 M390, CF dodo, Manix2 (CF S90V),Manix2 XL S90V, Zowada CF Balance Rassenti Nivarna, Lil' Nilakka, Tuff, Police 4, Chinook 4, Caly HAP40 52100 Military, S110V Military, Any/All PM2 & Military sprints/exclusives I can get my grubby hands on :) :spyder: :) :spyder: :)
"We may look curious, homely, whatever, but we'll never be called unusable or undependable."
-
farnorthdan
- Member
- Posts: 4409
- Joined: Wed Apr 02, 2014 11:32 pm
Re: Yojimbo 2 lock is sticking.
Hey welcome to the forum. :)ii_pennies wrote:Make sure there is no oil in the lock area and on the lockbar
Happy to be part of this great forum and group of down to earth spyderco addicts, Thanks Sal and gang.
My Grails: Lum Tanto folder sprint, Sprint Persian(red), Captain, Manix 2 (M4), SB MT, PM2 M390, CF dodo, Manix2 (CF S90V),Manix2 XL S90V, Zowada CF Balance Rassenti Nivarna, Lil' Nilakka, Tuff, Police 4, Chinook 4, Caly HAP40 52100 Military, S110V Military, Any/All PM2 & Military sprints/exclusives I can get my grubby hands on :) :spyder: :) :spyder: :)
"We may look curious, homely, whatever, but we'll never be called unusable or undependable."
My Grails: Lum Tanto folder sprint, Sprint Persian(red), Captain, Manix 2 (M4), SB MT, PM2 M390, CF dodo, Manix2 (CF S90V),Manix2 XL S90V, Zowada CF Balance Rassenti Nivarna, Lil' Nilakka, Tuff, Police 4, Chinook 4, Caly HAP40 52100 Military, S110V Military, Any/All PM2 & Military sprints/exclusives I can get my grubby hands on :) :spyder: :) :spyder: :)
"We may look curious, homely, whatever, but we'll never be called unusable or undependable."
-
ii_pennies
- Member
- Posts: 15
- Joined: Tue May 10, 2016 6:23 pm
Re: Yojimbo 2 lock is sticking.
Thank you very much. Im done lurkingfarnorthdan wrote:Hey welcome to the forum. :)ii_pennies wrote:Make sure there is no oil in the lock area and on the lockbar
Re: Yojimbo 2 lock is sticking.
Welcome to the forums!ii_pennies wrote:Make sure there is no oil in the lock area and on the lockbar
-Spencer
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Re: Yojimbo 2 lock is sticking.
I took the whole knife apart cleaned everything a spun the stop spin, and it's still sticking. I think the detent is too strong so Im thinking that I need to bend it back some.