Show your mods!

BOOMER52 · #1141

These are two of my most recent Manix 2 mod jobs... scales only swap using all the original hardware. With a mod job you have to make a decision as to the location of the pocket clip. It wouldn't look good to have machined pockets in multiple locations so both of these are tip up/right hand carry.

Toxic Green & Black layered G10 and Urban Camo (tan, olive drab, black) layered G10 CNC machined in the small Anso pattern.

BOOMER52

Holland · #1142

very nice boomer!
and welcome to the forums!

v8r · #1143

Those are killer Love the Toxic version!

Chipped Karambit · #1144

The desert version is amazing

Bladekeeper · #1145

I have no experience on this so if its a stupid question please bare with me on a tenacious where the ss liners follow the G10 scales .
If I had wooden scales made could vulcanised fibre liners be used with the same size torx screws ? I'm wondering if the depth although only mm may stop them screwing into the hole enough to compromise them.
I don't mean replacing the ss but having a fibre liner too if that wasn't obvious what I meant ? Noob alert .

superspyder · #1146

Bladekeeper wrote:I have no experience on this so if its a stupid question please bare with me on a tenacious where the ss liners follow the G10 scales .
If I had wooden scales made could vulcanised fibre liners be used with the same size torx screws ? I'm wondering if the depth although only mm may stop them screwing into the hole enough to compromise them.
I don't mean replacing the ss but having a fibre liner too if that wasn't obvious what I meant ? Noob alert .

It should not be a problem, as long as the wood scales are not too thick. Just check the measurements, and if you need longer screws you should be able to find some although I don't know what thread count those screws are.

vadel · #1147

Donut wrote:I love the mods you do to militaries. Did you have to put that spacer under the clip to fit the screw?

No. Size and fit the screws - no problem. All screws what i have - very long. I cut and grind them for special needs and sizes in every custom knife.
This is my "tuning tag" with signature and unique number of my custom. Owner (i made this mods for my clients) can remove (or ask me for that) this red (or black) tag. And save tag on (with? tag+some clue+cert) certificate, together.

PS sorry about my bad english... :confused:

RoBoTech · #1148

I just finished a Carbon fiber (red G-10 liners) Pingo. I add a thumbstud as it really helps to one hand this small knife. And I use a custom (handmade) pivot/bushing so I can use the nice pivot screws.
I did a green one that I posted a few days ago. I love the thing and it gets alot of pocket time. Even the rough clip works great.
And that is what I am asking folks here about.
I have not decided what clip (or even to use one) for this. I have the tools I need now to put the stock wire clip on, modify another Spydy clip like on the green one, make a new custom clip with the TI strip I have, or just make a kydex neck sheath (I have 11 colors).
What do you guys think?
Weather nicer today, took new pics. Any streaks on blade is oil. Thought I had it wiped, but noooo.
Be sure to refresh page if you don't see outside pics.

superspyder · #1149

Any of those options would be great, the knife is beautiful. I think it would be awesome to see a titanium clip that follows the lines of the pingo a bit. But i have no doubt that what ever is done it will look good. Awesome job RoBoTech!

Holland · #1150

the red g10 layer looks fantastic! great work!

RoBoTech · #1151

superspyder wrote:Any of those options would be great, the knife is beautiful. I think it would be awesome to see a titanium clip that follows the lines of the pingo a bit. But i have no doubt that what ever is done it will look good. Awesome job RoBoTech!

Yeah, I am eyeballing that strip and thinking what shape I could do and it not be too out there. Working on Duracoating a custom Buck Strider Tarani, right now, so will think about it some more.
Doing a red carbon fiber set with red, tactical black, and gray tiger stripe on blade and clip. Black on the liners, Red on the spool standoffs and screws. Personal knife, so trying to get it right. I have to build a clip for it, too. It will be a wedge shape to match the Buck Strider lines

RoBoTech · #1152

Holland wrote:the red g10 layer looks fantastic! great work!

Thank you! Found a thin carbon fiber and layered it with red G-10. The red is translucent, so it turn almost burgundy on the black CF.

Eastwood · #1153

Here's a Tenacious I did a few weeks ago.

jabba359 · #1154

Eastwood wrote:Here's a Tenacious I did a few weeks ago.

Welcome to the forum! How did you mask off the Spyderco logo on the clip?

Eastwood · #1155

My buddy does vinyl lettering. I had him cut out a few and I applied it before the acid wash. When you remove it the logo stays.

Pockets · #1156

You all make my mods look shabby. Great work!
I need to get more layered G-10.

Also, welcome to the forum!

Holland · #1157

Welcome to the forums eastwood! and brilliant mod!

Tally-ho · #1158

RoBoTech wrote:I just finished a Carbon fiber (red G-10 liners) Pingo. I add a thumbstud as it really helps to one hand this small knife. And I use a custom (handmade) pivot/bushing so I can use the nice pivot screws.

Great looking mod.
The pivot screw is nice and I like this rough Carbon Fiber pattern.
I would like to see a few CF spyderco knives with this kind of carbon fiber. The kinds of CF used by Spyderco with different but very regular patterns (weft with straight lines) tend to be boring.

1623 · #1159

Nothing drastic here. I like the classy appearance of the hourglass clips, so I swapped out the original Leaf Storm version with the Cricket's.

araneae · #1160

Here are a few regrind mods I did for Left Hand Path. Clip point Stretch, Junior Drop point with swedge and Techno with an angular Drop Point. Let me know what you think.

This little guy was a bit of work with its thick XHP blade stock.