Mule Team Issues - READ ME PLEASE

A place to share your experience with our Mule Team knives.
Post Reply
User avatar
TazKristi
Member
Posts: 3920
Joined: Wed Jan 26, 2005 12:00 pm
Location: Golden, CO

Mule Team Issues - READ ME PLEASE

#1

Post by TazKristi »

We know we had a few issues with the initial release of the Mule Team. Thanks for your patience. We'll be adding inventory to the site as needed (keep in mind, SFO staff does go home at night ;) ).

We apologize to those who had an incorrect shipping charge added to their order. There was a glitch in the code. It's been fixed and anyone who was erroneously charged freight will receive a credit.

Now for some issues that are not on our side...

There are some folks who have ignored the limit of 2. We've written basic code to enforce the limit in the shopping cart, but I would rather NOT have to ask our Webmaster to write code to block every possibility around the basic system. We've got many other priorities for the site that we'd prefer he focus on.

The original rule was a limit of 2 per person per address. IF Sales permit, we may open that limit, but only once sales of MT01P have indicated that everyone who wants to participate has been able to do so.

For anyone who placed multiple orders to get around the 2 piece limit, your second order will be held. It will not be shipped and you will not be charged. Once we can review them all we'll determine if the "multiples" will be canceled.

For anyone who ordered and then had a spouse order, the limit applies to your household. So again, the second order will be held.

We had hoped that the limit would be adhered to on the honor system. We hope we don't need to impose any more restrictions to the site to maintain the integrity of the project.

For everyone who has already ordered and followed the 2 piece limit, Thank You!

Thanks for your cooperation.

Kristi
There is nothing more important than this one day.
Top
User avatar
sal
Member
Posts: 18150
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

#2

Post by sal »

I too must chime in. We really had no idea that there would be so much immediate interest in the project. It seems that more than just "steel junky's" are getting involved. There should be enough to go around. If not, we'll figure out how to deal with it.

This is new territory for all of us as it is a new concept. I'm sure we'll improve on the next one.

sal
Top
Slick
Member
Posts: 687
Joined: Fri Sep 24, 2004 10:33 am
Location: North Carolina USA

#3

Post by Slick »

I just ordered one and I am so happy I could ****.

Thank you.
Not really all that slick ;)
Top
Slick
Member
Posts: 687
Joined: Fri Sep 24, 2004 10:33 am
Location: North Carolina USA

#4

Post by Slick »

Would it be possible to post the "names" of the scaliwags who tried to over order? These individuals could not have been ordering mules in accordance to Sal's stated policy of making them available. There are those who might be ordering extras as gifts so maybe I am being harsh here.

In any case I would appreciate knowing who here cheats (with numbers) on a good person doing a good thing for us and the company.
Not really all that slick ;)
Top
Fred Sanford
Member
Posts: 5736
Joined: Fri Jun 02, 2006 12:41 pm
Location: Ohio, USA

#5

Post by Fred Sanford »

Thank you Sal & Kristi (and everyone else helping and making these knives). I haven't ordered one yet (but I will) and I'm glad to see you trying to enforce the 2 per person limit. We "little guys" appreciate it.

Cheers :)
"I'm calling YOU ugly, I could push your face in some dough and make gorilla cookies." - Fred Sanford
Top
User avatar
zenheretic
Member
Posts: 7549
Joined: Sun Jul 03, 2005 8:47 am
Location: USA, Earth

#6

Post by zenheretic »

Slick wrote:Would it be possible to post the "names" of the scaliwags who tried to over order? These individuals could not have been ordering mules in accordance to Sal's stated policy of making them available. There are those who might be ordering extras as gifts so maybe I am being harsh here.

In any case I would appreciate knowing who here cheats (with numbers) on a good person doing a good thing for us and the company.
Shiny footprints Slick. :)

Besides as stated by Taz, there may not be enough demand so those who ordered more may get them. Time will tell it is all new.
Follow the mushin, but pay it no heed.
Top
User avatar
Murdoc
Member
Posts: 1227
Joined: Fri Jan 05, 2007 1:54 am
Location: Koblenz, Germany
Contact:
Contact Murdoc

#7

Post by Murdoc »

Slick,

As far as I know Sal and crew by now, I'd think that there's not a single chance to get that list. No squealing here.

Besides, there's no connection between the Forum name and the SFO account, AFAIK. They don't even have to be part of the forum community.

After the initial hype is over and the dust has settled, I'm sure we will find out that anybody who wanted a Mule will have gotten one (at least!).

So, thanks again Sal and crew for this great project and see you in Solingen in a few weeks!


Dennis
Top
User avatar
Brad S.
Member
Posts: 1126
Joined: Thu May 17, 2007 12:06 am
Location: Tucson, AZ
Contact:
Contact Brad S.

#8

Post by Brad S. »

To Sal, Kristi, Lynnette, Jim, and anyone else whose names I dont know at the SFO. Thanks for such a great project. For those of us steel junkies, I cant tell you how excited I am to use my new mule. I have had longboard and bicycle bearings made from 52100 or years and always thought it would make a great knife. Its seems to be great so far, with my total of one day of use. So again thanks for undertaking a project like this for us. I cant wait to see what the next steel will be.

As well I'm sorry that the system is being abused. I would have hoped that this kinda thing wouldnt have happened as I respect many of the folks on this forum and it makes me sad that some of our fellow forumites would not follow the simple limit of 2 knives.

Anyways back to the good stuff. Thanks again so much for all your work. One of these days I would like to take you all for drinks, or coffee, or something... Kudos to the folks at Spyderco...

I think Im going to go cut something with my new Mule... Maybe a sandwich :D

I dont really want to open my refrigerator door. Do you think 52100 could cut threw it :D
Brad Southard

Southard Knives

"Whatever you do, work at it with all your heart, as working for the Lord, not for men," Colossians 3:23
Top
clovisc
Member
Posts: 4185
Joined: Mon Jan 03, 2005 12:14 am
Location: Ketchikan, Alaska

#9

Post by clovisc »

i was wondering about the shipping charge... in fact, thinking i had to pay an extra $8, i ordered one instead of two.

might go back now to order a second... these knives seem too good to pass up... :D
Top
User avatar
Raqudu
Member
Posts: 295
Joined: Mon May 21, 2007 8:08 pm
Location: Southern California

#10

Post by Raqudu »

Thanks for the bonus, Kristi. I didn't realize that the price was to be inclusive of shipping.
Raqudu :D

Freedom is never a gift. It is the "pearl of great price" in anguish won.
[RIGHT]- The Theological Concept of Freedom[/RIGHT]

"Well, it's a nice soft night so I think I'll go and join me comrades and talk a little treason."
[RIGHT]- Michaleen Flynn (Barry Fitzgerald) in "The Quiet Man"[/RIGHT]
Top
thombrogan
Member
Posts: 2074
Joined: Fri Sep 24, 2004 10:33 am
Location: New Hampshire USA

#11

Post by thombrogan »

Thanks, Kristi!
"I knew you before you knew you had hands!" ~Tracey Brogan

"Ah-ha! A Spyderco moment!" ~Michael Cook

"Hawkbills - Sink in the tip and let it rip!" ~Axlis

"I would rather have questions that can't be answered than answers which can't be questioned" ~Richard Feynman
Top
User avatar
ragingwolf66
Member
Posts: 45
Joined: Fri Dec 07, 2007 1:25 pm
Location: Fairbanks, Alaska
Contact:
Contact ragingwolf66

#12

Post by ragingwolf66 »

Doh...I just needed to read before posting. I am going to try and get one of these!!! What an awesome deal.

Ed
Top
User avatar
GeorgeMaggos
Member
Posts: 714
Joined: Mon Jun 19, 2006 8:39 am
Location: Wildwood IL
Contact:
Contact GeorgeMaggos

Thanks to all involved

#13

Post by GeorgeMaggos »

Tricod wrote:
To Sal, Kristi, Lynnette, Jim, and anyone else whose names I dont know at the SFO. Thanks for such a great project. For those of us steel junkies,

So again thanks for undertaking a project like this for us. I cant wait to see what the next steel will be.

Thanks again so much for all your work. Kudos to the folks at Spyderco...
I wholeheatedly agree with you Tricod & would like to personally thank everyone involved as well.

I was able to show some of my appreciation by my invlovement in the pizza party some of us here got together on & threw for the folks in Golden but that was only a small token of my appreciation. I wish I could do more.

[CENTER]Thanks for doing what you do for us :) [/CENTER]

~George
[CENTER]
~~~~~~~~~~
"The test of courage comes when we are in the minority.
The test of tolerance comes when we are in the majority. "[/CENTER]


[CENTER][SIGPIC][/SIGPIC][/CENTER]


[CENTER]Even though you can't see Him, GOD has always been there for you <><[/CENTER]
Top
User avatar
JacksonKnives
Member
Posts: 837
Joined: Thu Jan 10, 2008 7:28 pm
Location: Alberta, Canada
Contact:
Contact JacksonKnives

#14

Post by JacksonKnives »

Good grief, you people rock.
Top
IPSC
Member
Posts: 29
Joined: Fri Feb 04, 2005 10:36 pm

#15

Post by IPSC »

If your going to cheat, at least attempt to use some creativity.

I'm glad there was a mule left for me.

Need some paracord and a sheath now :)
Top
User avatar
gunmike1
Member
Posts: 882
Joined: Fri Mar 03, 2006 8:14 am

#16

Post by gunmike1 »

IPSC wrote: I'm glad there was a mule left for me.

Need some paracord and a sheath now :)

Me too! I got a bit pissy when I logged on that first night to a sold out icon, butnow am in search of accesories so that I can use mine.

Mike
Top
HaroldB
Member
Posts: 83
Joined: Sat Jan 12, 2008 2:53 pm

#17

Post by HaroldB »

Mine's due to arrive later this week. :D

Has anyone posted pics of their new Mule yet ? :confused:
Top
User avatar
GeorgeMaggos
Member
Posts: 714
Joined: Mon Jun 19, 2006 8:39 am
Location: Wildwood IL
Contact:
Contact GeorgeMaggos

Welcome

#18

Post by GeorgeMaggos »

HaroldB wrote:Mine's due to arrive later this week. :D

Has anyone posted pics of their new Mule yet ? :confused:
Hey Harold,

welcome to the forum. I hope you enjoy your stay here. I posted some pics of my Mule he you go.

GMaggos wrote: [CENTER]Image




Image





Image




Image




Image



Image[/CENTER]
~George
[CENTER]
~~~~~~~~~~
"The test of courage comes when we are in the minority.
The test of tolerance comes when we are in the majority. "[/CENTER]


[CENTER][SIGPIC][/SIGPIC][/CENTER]


[CENTER]Even though you can't see Him, GOD has always been there for you <><[/CENTER]
Top
User avatar
jaislandboy
Member
Posts: 6150
Joined: Sun Jan 30, 2005 12:00 pm
Location: tennessee

#19

Post by jaislandboy »

thanks for the pix George, I'm still waiting on mine :)
brian
"All paths lead back to the Spyderhole..."
Top
Scott Gere
Member
Posts: 30
Joined: Tue Apr 03, 2007 8:33 am

Mule Sheath

#20

Post by Scott Gere »

gunmike1 wrote:Me too! I got a bit pissy when I logged on that first night to a sold out icon, butnow am in search of accesories so that I can use mine.

Mike
Mike,

I am Scott Gere. I make Mule sheaths. Months back I designed a sheath for the Mule without a handle and one with the handle for sal. I use the boltaron and they will be equiped with the G-clip when available. I've been using the small techlok until the G's come out.



Scott,
Top
Post Reply

Return to “Mule Team Discussion”