What's the most you're willing to pay for a knife?

If your topic has nothing to do with Spyderco, you can post it here.

What's the most you're willing to pay for a knife?

Up to $50
1
1%
Up to $100
14
19%
Up to $200
17
23%
Up to $300
7
10%
Are you kidding me? I don't care what it costs, if it's got what I want, I'll pay it.
16
22%
It depends...
18
25%
 
Total votes: 73

User avatar
severedthumbs
Member
Posts: 1545
Joined: Tue Sep 28, 2004 6:28 pm
Location: USA Earth

#21

Post by severedthumbs »

I have paid up to $2500 for a knife, but most of the time it seems that around $800 or so is the most I like to pay.
User avatar
rainman
Member
Posts: 211
Joined: Fri Sep 24, 2004 10:33 am
Location: Albuquerque, NM USA

#22

Post by rainman »

I can't really picture a knife that I would have a use for that would cost more then $200.00. I would say less, but I'm leaving room for what the super hawk bill may cost. I used to think I was collecting Spyderco's but have used all but the forum DiAlex Adventura ( I did carry this one to church once :p ); I will have to buy a user. I even kept the waved endura in it's box for months but, truly, what is the point?
---Tom
:spyder:
TANSTAAFL
-R.A. Heinlein
Happiness is One Ragged Hole ;) (in the 10 ring)
User avatar
severedthumbs
Member
Posts: 1545
Joined: Tue Sep 28, 2004 6:28 pm
Location: USA Earth

#23

Post by severedthumbs »

[quote="rainman"]I can't really picture a knife that I would have a use for that would cost more then $200.00. I would say less, but I'm leaving room for what the super hawk bill may cost.QUOTE]

super hawk bill? Reese is the master of hawk bills!

Image
User avatar
JaM
Member
Posts: 887
Joined: Mon Jan 16, 2006 7:45 am
Location: The Netherlands

#24

Post by JaM »

It depends... on my money-situation, and the "need" for said knife. I like my spyders at the moment, but before I got these I already thought I had the "perfect" workknife, + EDC. Guess I was wrong.

I cant see myself paying more than 200 € though, I'd be too scared to lose it, let alone use it. Unless I win the lottery sometime :o .
User avatar
WOTANSON1
Member
Posts: 630
Joined: Mon Jun 13, 2005 8:41 am
Location: Mahopac, NY

#25

Post by WOTANSON1 »

If I actually had a job that paid a cash wage :rolleyes: , I could see a $500+ purchase for a custom, I have paid that before, well before Auggie (my son that is). I do have a Elishewitz on order that I basically paid for in advance, that was when .......I had a job that paid a cash wage. For factory knives (Spyderco only thank you very much) $125 max, that is I would pay $125, if I had a job with a cash wage. :D :D . I do get to raise my son, better than any knife :) , nice to have toys though ;) .
Cheers,
Rob
International Order of the SpyderEdge-founding member

Faith, Folk and Family

If you can read this, thank a Teacher.
If this is written in English, thank a US Soldier


NOT my "president"

Proud Member of SOSAK
User avatar
speyederlover
Member
Posts: 245
Joined: Wed Sep 07, 2005 9:46 pm

#26

Post by speyederlover »

The most I've spent so far is $450 for a limited edition Sebenza. It was definitely worth it too. I have bought two other Sebenzas. One small classic and a large regular. I had no hesitation either. In my opinion they are worth it to me. But that's me. I have put in an order with Bob Lum for a custom knife that will be around $700 but it will be two years before he can start on it. He makes some beautiful knives.
User avatar
rainman
Member
Posts: 211
Joined: Fri Sep 24, 2004 10:33 am
Location: Albuquerque, NM USA

#27

Post by rainman »

Severedthumbs, That is one awsome knife! But, it makes my point, for me at least. The occasion would be so rare for me to carry a knife like that, that I might as well spend the money on several :spyder: 's that I would actually use. if I put one scratch on a knife like that I'd be pi$$ed for, well, a long time.
As others have said, if $ were no object, I would almost certainly have several thousand in various knives :cool: .
By the way, how much would something like that cost?
severedthumbs wrote:
rainman wrote:I can't really picture a knife that I would have a use for that would cost more then $200.00. I would say less, but I'm leaving room for what the super hawk bill may cost.QUOTE]

super hawk bill? Reese is the master of hawk bills!

Image
---Tom
:spyder:
TANSTAAFL
-R.A. Heinlein
Happiness is One Ragged Hole ;) (in the 10 ring)
User avatar
Gibsoniam
Member
Posts: 527
Joined: Tue Oct 26, 2004 12:00 pm
Location: The Lone Star State

$100-$150

#28

Post by Gibsoniam »

I voted "$100" because so far, that is the most I have paid, and have been willing to pay, for a knife (my two UKPKs). I mention up to $150 because when I can afford it, I plan to buy a Lil Temperance. Yet, most of my knives have been in the $35-$70 range. I can't imagine a knife that I would spend over $100 on (except the aforementioned lil temperance or MAYBE the Benchmade Presidios) just because my knives get so much light use. :)
Mike :cool:

<><
1 Peter 3:15


"A pessimist sees the difficulty in every opportunity;
an optimist sees the opportunity in every difficulty."
Winston Churchill


EDC
Spyderco Meerkat Sprint
HDS Systems EDC Executive 140W
Fisher Space Pen
User avatar
zenheretic
Member
Posts: 7549
Joined: Sun Jul 03, 2005 8:47 am
Location: USA, Earth

#29

Post by zenheretic »

WOTANSON1 wrote:If I actually had a job that paid a cash wage :rolleyes: , I
Son of Odin, pray tell what are you compensated with, flagons of mead? :p
Follow the mushin, but pay it no heed.
User avatar
HoB
Member
Posts: 1520
Joined: Fri Sep 24, 2004 10:33 am
Location: Lexington, MA USA

#30

Post by HoB »

I voted $200 which is the most that I am willing to pay for any Spyderco that I have seen so far. For a large camp blade I might be willing to pay a little bit more than that, but probably not more than $300. A custom would be a different animal. So as long as Spyderco doesn't offer a custom......

I am not a collector and thankfully Spyderco offers such great knifes for so little money (just look at the new Delica/Endura 4) I really don't see the need.
dsvirsky
Member
Posts: 929
Joined: Fri Sep 24, 2004 10:33 am
Location: SW VA

#31

Post by dsvirsky »

If we're talking Spydies, I don't think I've ever gone much over $100 and will probably never need to -- you can get a lot of knife for that money. If we expand the category to include small shop, semi-production knives (William Henry, Strider, etc.), I've got a few in the $175 to $400 range. Full out custom? I've spent $1,100 but don't anticipate breaking the $1k mark again any time soon.
User avatar
pjrocco
Member
Posts: 2287
Joined: Thu Mar 17, 2005 6:33 pm
Location: Chicago, IL
Contact:

#32

Post by pjrocco »

I'll pretty much pay whatever. If it's something I want bad enough, then the sky's the limit.
Rock
User avatar
Native Justice
Member
Posts: 187
Joined: Fri Oct 28, 2005 12:28 pm
Location: Littleton, CO

#33

Post by Native Justice »

Just ordered a MicroTech MTX2 w/ CE for around $280 w/ shipping, most I've spent to date .... the addiction continues to grow.
User avatar
Crafft
Member
Posts: 522
Joined: Wed Jul 27, 2005 11:12 pm
Location: Netherlands

#34

Post by Crafft »

It depends!

On Spydies the limit is about $200,= For some reason I don't care much for the (expensive) disco'd ones.
Next one will be the new Ocelot I think.

But I just bought a Lone Wolf Tactical Folder with the micarta scales for 299 euros (approx. $360,=), shipping and customs included. Those are very hard to find on the internet. Delivery will be next week... ;)

Next substantial purchase (will be around the month of june) is probably gonna be the MT MTX2 auto with micarta scales
Post Reply