MT01P - Seconds Availability

Discuss Spyderco's products and history.
Post Reply
User avatar
TazKristi
Member
Posts: 3984
Joined: Wed Jan 26, 2005 12:00 pm
Location: Golden, CO

MT01P - Seconds Availability

#1

Post by TazKristi »

[CENTER]Very soon (as in within 1-3 hours), there will be a sku activated on our site to make "Seconds" from the MT01P available for purchase. Details follow.
Please pay particular attention to the bolded comments.[/CENTER]

The new sku will be MT2ND.

The cost will be $36.00

These are "Seconds" and are notched as such in our traditional manner.

As before, there is a Limit of 2 per person.

Shipping charges will be the same as the original run.
[INDENT]Domestic Shipments will be free[/INDENT]
[INDENT]International Shipments will be $25.00 / shipped UPS Ground[/INDENT]

There is a Limited Quantity Available, once the site shows they are sold out, they really will be sold out.

The staff of SFO cannot hand-pick one for you, please do not request it (either online, by email, phone or fax). The orders will be pulled and shipped on a first-come, first-served basis.

[CENTER]*For those of you waiting for the next run, please be aware that shipping charges are likely to change, both for domestic and international shipments. If changes are made, they will be announced when the next Mule is confirmed and released.[/CENTER]

Kristi
There is nothing more important than this one day.
Top
RIOT
Member
Posts: 2923
Joined: Mon Mar 17, 2008 2:25 pm

#2

Post by RIOT »

what knife is the MT01P ?
Top
User avatar
ClockWork
Member
Posts: 763
Joined: Sat Mar 22, 2008 10:13 pm
Location: Lonetree Colorado.... south of Mecca

#3

Post by ClockWork »

RIOT wrote:what knife is the MT01P ?
I might be wrong... But it think its the Mule Team 01 Plain Edge....
Maybe the 52100 Ball Bearing steel model ???



COUNT ME IN!!!! :) :) :D :D :D :cool: :spyder:

-Clockage
:) Favorites: Black Paramil w/ D2 blade, PE Mini-Manix, S90v Military, Civilian, SE Dodo, PE Police, Sage


Vist my eBay store: Life and Liberty Gear
Tactical & MOLLE gear, Headgear and more

stores.ebay.com/Life-and-Liberty-Gear
Top
User avatar
tonydahose
Member
Posts: 6277
Joined: Thu Jan 19, 2006 7:56 am
Location: Chicago
Contact:
Contact tonydahose

#4

Post by tonydahose »

ClockWork wrote:I might be wrong... But it think its the Mule Team 01 Plain Edge....
Maybe the 52100 Ball Bearing steel model ???



COUNT ME IN!!!! :) :) :D :D :D :cool: :spyder:

-Clockage

you are not wrong :D
WTC #1444 Always Remember
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
Top
Franco G
Member
Posts: 323
Joined: Fri Sep 24, 2004 10:33 am
Location: Zagreb Croatia

#5

Post by Franco G »

I am sorry - cannot figure out the meaning of 'the seconds'.
The same mules as a first run?
The same specifications?
Or the mules with some imperfections?

I would appreciate an answer.

Thanks,


Franco
Spyderco: NON MULTA SED MULTUM

My islands
Top
User avatar
araneae
Member
Posts: 5506
Joined: Wed Aug 09, 2006 10:10 pm
Location: A lil more south of the Erie shore, Ohio

#6

Post by araneae »

Franco G wrote:I am sorry - cannot figure out the meaning of 'the seconds'.
The same mules as a first run?
The same specifications?
Or the mules with some imperfections?

I would appreciate an answer.

Thanks,


Franco
Or the mules with some imperfections?
Yes they just didn't meet quality control standards for some reason.
So many knives, so few pockets... :)
-Nick

Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
Top
User avatar
mrappraisit
Member
Posts: 1435
Joined: Fri Nov 16, 2007 10:28 am
Location: AZ,480

#7

Post by mrappraisit »

Franco G wrote: Or the mules with some imperfections?

Franco
I believe they have minor imperfections. I know from previous posts that many members have bought seconds (at SFO sales) and cannot typically find the defects, or if they can they are minor.
After enlightenment, the laundry.
Top
User avatar
Jay_Ev
Member
Posts: 3048
Joined: Fri Sep 21, 2007 3:57 pm
Location: South Bay, CA

#8

Post by Jay_Ev »

Franco G wrote:Or the mules with some imperfections?
Yes, like others have already said, they just didn't meet the quality standards to be sold as a brand new knife. It could be something as minor as a stain on the handle (which will be covered up when you put scales on it anyway :D )

Jay
Top
RIOT
Member
Posts: 2923
Joined: Mon Mar 17, 2008 2:25 pm

#9

Post by RIOT »

i have a "second" and i cant find any problem with the knife at all anywhere, plus if the mule is a fixed blade what can possibly go wrong mechanicly?
Top
Franco G
Member
Posts: 323
Joined: Fri Sep 24, 2004 10:33 am
Location: Zagreb Croatia

#10

Post by Franco G »

Thanks friends.

I hope it were not a kind of 'bad heat treatment' imperfections.

BTW, a hardness of Rc 62 was quoted on this site. Is it a real hardness or a hardness before quenching (tempering)?

Franco
Spyderco: NON MULTA SED MULTUM

My islands
Top
yablanowitz
Member
Posts: 7367
Joined: Sun Apr 09, 2006 2:16 pm
Location: Liberal, Kansas

#11

Post by yablanowitz »

Lots of things. Uneven grinds, the one the new guy took the tip off during sharpening, the one that got dropped on the concrete floor point first, the one that warped a little during heat-treatment...

Murphy is always lurking ;)
I don't believe in safe queens, only in pre-need replacements.
Top
RIOT
Member
Posts: 2923
Joined: Mon Mar 17, 2008 2:25 pm

#12

Post by RIOT »

yablanowitz wrote:Lots of things. Uneven grinds, the one the new guy took the tip off during sharpening, the one that got dropped on the concrete floor point first, the one that warped a little during heat-treatment...

Murphy is always lurking ;)

i honestly dont think spyderco is going to send you some peice of junk with the spyderco name behind it.

id buy any other second but the mule ????? passing on that one, i like the folders with locking blades
Top
User avatar
ClockWork
Member
Posts: 763
Joined: Sat Mar 22, 2008 10:13 pm
Location: Lonetree Colorado.... south of Mecca

#13

Post by ClockWork »

So wait...

Do we just search "MT2ND" on the site to find it?
Cause, Its not finding anything. I am assuming that its not up yet, But I don't want to miss it.
Do you have a link that we will be able to get it at, when it becomes available?
Top
Piercieve
Member
Posts: 523
Joined: Sun Apr 13, 2008 12:10 pm

#14

Post by Piercieve »

ClockWork wrote:So wait...

Do we just search "MT2ND" on the site to find it?
Cause, Its not finding anything. I am assuming that its not up yet, But I don't want to miss it.
Do you have a link that we will be able to get it at, when it becomes available?
I say just call SFO. That's what I'm gonna do, If I decide I want this.

I'm just gonna use mine as a kitchen knife probably. Keep it clean and dry, and in the knife block when not in use. w00t!
"I ain't looking for confusion, but it tends to follow me."

E4 white, E4 waved SE, Caspian Salt, Crossbill, Mule, white Dragonfly, Boker CLB Desert Subcom, BM Blackwood mini Skirmish,
Top
User avatar
hiredgun
Member
Posts: 530
Joined: Tue Nov 01, 2005 12:05 pm
Location: Western USA, Earth

#15

Post by hiredgun »

They're up!!!
You can't display a toad in a fine restaurant like this! Why, the good folks here would go right off the feed!
Top
jeffbr
Member
Posts: 51
Joined: Sun Jan 06, 2008 8:48 pm
Location: Seattle

#16

Post by jeffbr »

ClockWork wrote:So wait...

Do we just search "MT2ND" on the site to find it?
Cause, Its not finding anything. I am assuming that its not up yet, But I don't want to miss it.
Do you have a link that we will be able to get it at, when it becomes available?
It is up now, and you can find it right here:
http://www.spyderco.com/catalog/details.php?product=323
Top
User avatar
amen74
Member
Posts: 2011
Joined: Wed Feb 13, 2008 1:26 am
Location: Victorville, CA

#17

Post by amen74 »

Thank you Lynette and Kristi! Just got my limit of 2! Awesome!
Aaron

Current EDCs: Golden models
:spyder: FG D2 Military:cool: Orange UKPK:spyder:

NEXT: Rock Lobster, Manix2, TiMil
Top
gt_mule
Member
Posts: 48
Joined: Tue Feb 19, 2008 11:35 am

#18

Post by gt_mule »

They're up. Two inbound.
Top
User avatar
cobrajoe
Member
Posts: 2434
Joined: Thu Jun 08, 2006 9:31 am
Location: Nebraska

#19

Post by cobrajoe »

One headed my way!

Thanks for the heads up Taz!
MEMBER OF THE INTERNATIONAL ORDER OF THE SPYDEREDGE
Top
User avatar
ClockWork
Member
Posts: 763
Joined: Sat Mar 22, 2008 10:13 pm
Location: Lonetree Colorado.... south of Mecca

#20

Post by ClockWork »

Sweeet....
I got one!

(Only 1 cause I actually just bought a Civy. I blame you guys for this :mad: :rolleyes: !)
Top
Post Reply

Return to “Spyderco General Discussion”