What's your sharpest spydie?
- tonydahose
- Member
- Posts: 6277
- Joined: Thu Jan 19, 2006 7:56 am
- Location: Chicago
- Contact:
What's your sharpest spydie?
i did a quick search with "sharpest" in the search field and it has been almost 2 years since we have had one of these threads. there have been alot of new :spyder: s since then so i thought i'd start new one. this is a three part question. what is the sharpest out of the box spydie you have had? which spydie have you personally or had a professional (krein regrind?) gotten to be the shapest? did that knife beat out any of the new out of the box razor sharp spyies? out of the box i am guessing something with zdp (stretch, calyIII, jess horn) or one of the newer millies will come out on top. for me it is a toss up between the ZDP's caly III and calypso. my sharpest spydie is my temperance plain edge. it was my SD knife next to the bed and never was used to cut much of anything but i gave it lots of TLC on the ultrafine rods and it shows. so what are your sharpest :spyder: s?
WTC #1444 Always Remember
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
- telemeister
- Member
- Posts: 548
- Joined: Fri Feb 08, 2008 7:25 pm
- Location: Sydney, Australia
a good question. My sharpest would have to be the caly3 or ukpk. I am getting a Caly CF next week, so that should take the
lead.
lead.
Top :spyder:s : Caly 3, Stretch, Millie, Manix 2, Police, Kopa, Polliwog, Meerkat, Chinook III, and SuperHawk.
[SIGPIC][/SIGPIC] Click the pic to see my :spyder:
[SIGPIC][/SIGPIC] Click the pic to see my :spyder:
Currently its between the Caly 3, Millie or Yojimbo. The Yoyo probably takes the cake. They are all scary sharp that I sometimes close them 2 handed :eek: ROFL....only sometimes !
Cheers
Daniel (Certified Persian & Kopa nut)
Facebook profile: https://www.facebook.com/ozspyder
:spyder: I love my: Persians, Kopas, and Lums
:spyder: * Daniel's Spyderco Hoard *
:spyder: * Ozspyder's Kopa Kabana *
Daniel (Certified Persian & Kopa nut)
Facebook profile: https://www.facebook.com/ozspyder
:spyder: I love my: Persians, Kopas, and Lums
:spyder: * Daniel's Spyderco Hoard *
:spyder: * Ozspyder's Kopa Kabana *
For me, its my SS Dragonfly ATS-55.
It can easily compete with any knife I have.
Thin edge, good geometry and a good steel, that's all it takes, and a good heattreat.
It can easily compete with any knife I have.
Thin edge, good geometry and a good steel, that's all it takes, and a good heattreat.
All your knifelinks, http://www.knifelinksportal.com
Hmmm, out of the box sharpest would probably be my ZDP Caly Jr. or my Merlin in ATS-55. The Merlin actually took a nice slice off the tip of my finger when I got careless closing it one-handed...the blade did not hesitate one tiny bit. :eek:
As far as the edge I personally put on, I would have to go with either my BG-42 or D2 Millie. Both blades take a super scary, ultra fine edge. I took my D2 Millie from not able to shave, to able to literally split a hair in half longways along the shaft. :cool:
As far as the edge I personally put on, I would have to go with either my BG-42 or D2 Millie. Both blades take a super scary, ultra fine edge. I took my D2 Millie from not able to shave, to able to literally split a hair in half longways along the shaft. :cool:
I prefer to ask for forgiveness rather than permission.
I LOVE MY MILLIES
ΜΟΛΩΝ ΛΑΒΕ
I LOVE MY MILLIES
ΜΟΛΩΝ ΛΑΒΕ
1) C52PBKE Calypso Jr. Black Handle ZDP189tonydahose wrote: this is a three part question.
what is the sharpest out of the box spydie you have had?
which spydie have you personally or had a professional (krein regrind?) gotten to be the shapest?
did that knife beat out any of the new out of the box razor sharp spyies?
C113CFPE Caly 3 CarbonFiber ZDP-189
C38PBRG Jess Horn (red) laminated ZDP-189
(yes, 3-layers ZDP-189/420 blades are sharpest :spyder: )
2) Old C52SBK Calypso Jr. Black Handle, serreted edge regrinded to plain edge (forced renewal of second-hend knife)
3) Yes, but not for a long time. ZDP-189 is harder than VG-10, of course.
The Sharpest Spydie I've gotten out of the box (and my current sharpest sharp Spydie) is my CF/ZDP Caly3. It's so sharp that I almost feel bad cutting things with it. :o
The Spydie that I've gotten sharpest myself is my Yang kitchen knife; although I've nearly surpassed that level with my PE Caly3. :D
The Spydie that I've gotten sharpest myself is my Yang kitchen knife; although I've nearly surpassed that level with my PE Caly3. :D
Back from an extended hiatus.
- rocketbomb
- Member
- Posts: 82
- Joined: Mon Jan 07, 2008 11:42 pm
- Location: Nebraska, USA, etc.
- Contact:
Sharpest out of the box was my Moran fixed blade. My sharpest EDC is usually a tie between my ZDP Caly Jr. and my Mini-Manix. The Manix takes a very good edge. I'm impressed.
"For the word of God is living and active and sharper than any two-edged sword..." Hebrews 4:12
I may be slow, but I'm not very good.
-B. Stark
I may be slow, but I'm not very good.
-B. Stark
- Michael Cook
- Member
- Posts: 4383
- Joined: Fri Apr 01, 2005 9:44 pm
- Location: People's republic of Madison
- Contact:
:spyder: out of the box was caly jr. and street breat, maybe the WT karambit. By my own hand I've gotten my strong side Yoji sharper than anything else. :spyder:
More of what does not work will not work. Robin Cooper, Rokudan; Aikikai.
There is great power in the profound observation of the obvious. John Stone, Rokudan; Aikikai
There is great power in the profound observation of the obvious. John Stone, Rokudan; Aikikai
- mrappraisit
- Member
- Posts: 1435
- Joined: Fri Nov 16, 2007 10:28 am
- Location: AZ,480
- tonydahose
- Member
- Posts: 6277
- Joined: Thu Jan 19, 2006 7:56 am
- Location: Chicago
- Contact:
i am waiting for someone to chime in with the stretch II also...the exotic steels seem to have the edgemrappraisit wrote:
Good question Tony. It's not surprising how many Caly Jr's show up as sharpest.

WTC #1444 Always Remember
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
:spyder: :spyder: :cool: :spyder: :spyder: I would say the Sharpest out of the box Spyder I ever owned is a tie between my Para/SE/DLC, and my Ti-Atr/pe :eek: As for getting one reground, that I've never done. The 3 that I've resharpened the Sharpest was my mini Manix, my Endura1/G-2/SE, and my fg frn D4/se :eek: I havn't bought a new knife, sinse I bought my Stretch2, and I did not have to touch up the edge on that, at all :eek: :D
:spyder: :spyder: :cool: :spyder: :spyder: "Spyderco...does a pocket good":spyder:
Spyderco Rocks!!!! "A wise man once said all knives were created equal...Obviously, he meant Spydercos''
As of 1-29-08, I am a proud member of Knife Rights!
Spyderco Rocks!!!! "A wise man once said all knives were created equal...Obviously, he meant Spydercos''
As of 1-29-08, I am a proud member of Knife Rights!
Out of the box, most of my Spydies are more or less on the same level of really scary sharpness, with a few models sub-par.
(Unfortunately, the ZDP Delica was among them. I tried to sharpen it, but with limited success. And after cutting a pizza (!), even this was gone. Even putting a zero grind to it by Jürgen Schanz (our "Tom Krein" :) ) didn't help much. By now, I'm afraid that something is wrong with the blade steel.)
BTT:
The sharpest spydie I remember OOTB was one of my - MULEs ! Somebody in the factory did a really great job at the belt grinder. The edge seems to be a bit delicate though; when I will finally manage to put a handle to it and give it a sheath, I will start to test that thoroughly :o
Once used, my ZDP Endura lost its good sharpness relatively quick and I wasn't able to get it back to its initial shrarpness. So off it went to Jürgen Schanz for a "Military-Style" mod. It came back scary, scary sharp, on the same level as the MULE. And this time, it is easier to keep it that way. On my request, he changed the edge angle to 20-25° incl. I think this makes a huge difference!
Anybody else impressed with the sharpness of his/her MULE?
Dennis
(Unfortunately, the ZDP Delica was among them. I tried to sharpen it, but with limited success. And after cutting a pizza (!), even this was gone. Even putting a zero grind to it by Jürgen Schanz (our "Tom Krein" :) ) didn't help much. By now, I'm afraid that something is wrong with the blade steel.)
BTT:
The sharpest spydie I remember OOTB was one of my - MULEs ! Somebody in the factory did a really great job at the belt grinder. The edge seems to be a bit delicate though; when I will finally manage to put a handle to it and give it a sheath, I will start to test that thoroughly :o
Once used, my ZDP Endura lost its good sharpness relatively quick and I wasn't able to get it back to its initial shrarpness. So off it went to Jürgen Schanz for a "Military-Style" mod. It came back scary, scary sharp, on the same level as the MULE. And this time, it is easier to keep it that way. On my request, he changed the edge angle to 20-25° incl. I think this makes a huge difference!
Anybody else impressed with the sharpness of his/her MULE?
Dennis