Show off your latest purchase
-
3rdGenRigger
- Member
- Posts: 2406
- Joined: Sat Jul 20, 2013 8:01 pm
- Location: Calgary Alberta Canada
ya i have mad OCD at times haha. I am set on buying 3 SB dragonflys when they finally come out. and most likely two manbugs just for fun3rdGenRigger wrote:Great pictures! I still don't have 2 of any model, and somewhat doubt that'll change for some time...too many awesome Spydercos to choose from.
-Spencer
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
-
3rdGenRigger
- Member
- Posts: 2406
- Joined: Sat Jul 20, 2013 8:01 pm
- Location: Calgary Alberta Canada
My SuperBlue Stretch is in, but I haven't received it because the other half of the order I placed (Blue Nishijin Spin) isn't in yet. I placed a phone call indicating I'm willing to pay separate shipping so I should have it in this week (As well as my freshly customized Tuff and Swick too incidentally). Not 100% decided on my next purchase...might buy a couple green Tenacious in PE to try out as a beater knife (And give one to my 85 year old neighbour who's still outside farming every day religiously, and who has at least 10 awesome John Deere tractors).
All Glory To The Hypno-Toad
---> Branden
---> Branden
I wish they made a Superblue blade for the Military, I have a blade swap project going.
Maybe an M4, M390, S90V, or a S110V
Received this Saturday.
Wanted the new Silver version as I wanted to flame ano the scales and hardware, AND swap a super steel blade into the frame.
Still waiting to find a blade donor, and waiting on the spool stand offs. Sending out the lock bar side today to get the lock face carbidized.
But, here it is assembled for now.
Maybe an M4, M390, S90V, or a S110V
Received this Saturday.
Wanted the new Silver version as I wanted to flame ano the scales and hardware, AND swap a super steel blade into the frame.
Still waiting to find a blade donor, and waiting on the spool stand offs. Sending out the lock bar side today to get the lock face carbidized.
But, here it is assembled for now.
And that is why I did it. A classy Sunday-Go-To-Meeting knife that is deadly serious.MadRookie wrote:Looks very elegant. :)
This is the other TI Military I got in last week. Modded it with a Cru-Wear blade, orange peeled the hardware, carbized the lock face, and drilled tapped a tip up Ti pocket clip.
This one has put my CRK's back in the safe, and is in my pocket, right now.
RoBoTech wrote:And that is why I did it. A classy Sunday-Go-To-Meeting knife that is deadly serious.
This is the other TI Military I got in last week. Modded it with a Cru-Wear blade, orange peeled the hardware, carbized the lock face, and drilled tapped a tip up Ti pocket clip.
This one has put my CRK's back in the safe, and is in my pocket, right now.
....what.....you take it to church.......????
-
rescueseven
- Member
- Posts: 448
- Joined: Thu Dec 30, 2004 7:45 am
- Location: 23.48° @ 67,275.59 meters from Spyderco
After being gone for well over two years, being unemployed, and having a change in careers, its good to be back!
Stopped by the Spydie mother ship today and picked up a few things- K04SBK, K04PBK,and a C10FPGYE.
Stopped by the Spydie mother ship today and picked up a few things- K04SBK, K04PBK,and a C10FPGYE.
"Don't tempt me, I'll do a sprint run of it!" -Eric
"We've been working on this design for 10 years, unsuccessfully." -Sal
WTC #1398 Bless their souls
"We've been working on this design for 10 years, unsuccessfully." -Sal
WTC #1398 Bless their souls
-
rescueseven
- Member
- Posts: 448
- Joined: Thu Dec 30, 2004 7:45 am
- Location: 23.48° @ 67,275.59 meters from Spyderco
-
rescueseven
- Member
- Posts: 448
- Joined: Thu Dec 30, 2004 7:45 am
- Location: 23.48° @ 67,275.59 meters from Spyderco
Here's a Blue Bento Box exclusive with an S90V blade I got today. The blade gets swapped into my Gold Fluted Ti project.
You can see it here.
And a Grail. Wanted one of these for so long, but never had one in my price. Until last week. Got today.
Lone Wolf Paul Paua Perfecto. Small Gents knife. GORGEOUS. The color changes with position and light.
You can see it here.
And a Grail. Wanted one of these for so long, but never had one in my price. Until last week. Got today.
Lone Wolf Paul Paua Perfecto. Small Gents knife. GORGEOUS. The color changes with position and light.
Brouwer Brent Coyote G-10 and CTS-XHP
Yesterday I received my Brent. A very small little custom necker by Brouwer Knives. But despite the small size, I have a very secure grip on the thicker sculted handle. I opened some boxes and was suprised by the cutting capabilities. The 3mm thick blade tappers very nicely to a fine but very solid point. The CTS-XHP was heatthreaded by Paul Bos at 60HRC.
Size comp with Ladybug and Squeak
Yesterday I received my Brent. A very small little custom necker by Brouwer Knives. But despite the small size, I have a very secure grip on the thicker sculted handle. I opened some boxes and was suprised by the cutting capabilities. The 3mm thick blade tappers very nicely to a fine but very solid point. The CTS-XHP was heatthreaded by Paul Bos at 60HRC.
Size comp with Ladybug and Squeak
Current EDC: Techno, Squeak, Southard Flipper, Caly 3.5
New Arrivals: Chap3, Domino, Sage 3
2014 Wishlist: Yo2 CF, Deviant Friction, Tatanka, Tusk, Firefly
Oldies Wishlist: Delica CF PE, Civilian CF PE
New Arrivals: Chap3, Domino, Sage 3
2014 Wishlist: Yo2 CF, Deviant Friction, Tatanka, Tusk, Firefly
Oldies Wishlist: Delica CF PE, Civilian CF PE
