I have been away for a while...

Discuss Spyderco's products and history.
Post Reply
User avatar
unit
Member
Posts: 1831
Joined: Sat Nov 28, 2009 10:47 am
Location: Missouri, USA

I have been away for a while...

#1

Post by unit »

But I have certainly not lost any love for Spyderco.

This may belong in "off topic" so mods can move it if they like. I just wanted to post here so more of my old friends would see it.

I have gotten much deeper into the knife seen in recent months, and have lost no passion in that regard, but unfortunately I have been spending much less time on this forum (you have changed the place quite a bit!)

Anyway, some of you may know that I have had a developing interest in BladeSports and competitive cutting. Well, I have taken that several steps farther and acquired all the necessary gear to train and compete (including becoming certified by Spyderco's Sponsored Cutter and two time National Champ, Donavon Phillips).

I plan to start competing soon, and who knows...perhaps some day Spyderco will develop a competition blade for us to buy? I would love to try one out!

Anyway, I have been hard at work with this, and anyone who is interested in more, either feel free to contact me. I will try to check in here a little more from now on ;)

Have a great day!

Ken
Thanks,
Ken (my real name)

...learning something new all the time.
Top
User avatar
Pinetreebbs
Member
Posts: 1834
Joined: Sat Jun 26, 2010 6:55 am
Location: SC

#2

Post by Pinetreebbs »

Thank you for the update. and yes you have been missed. Once I saw some of your videos like chopping golf balls (Golf balls and knives!) I guessed you would be compete sooner or later. :)
Have you joined Knife Rights yet?
Go to: http://www.KnifeRights.org
Protecting your Right to own and carry the knives YOU choose.
Top
User avatar
unit
Member
Posts: 1831
Joined: Sat Nov 28, 2009 10:47 am
Location: Missouri, USA

#3

Post by unit »

Oh my, that is an old one.

I have made a few other videos since then, but not as many as I used to.
Thanks,
Ken (my real name)

...learning something new all the time.
Top
User avatar
Donut
Member
Posts: 9614
Joined: Sat Sep 05, 2009 5:47 pm
Location: Virginia Beach, VA, USA

#4

Post by Donut »

Welcome back Ken. You've been away but you've not been forgotten.

Best of luck with the competitions.
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
Top
User avatar
Evil D
Member
Posts: 28763
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

#5

Post by Evil D »

Who are you again? ;)
~David
Top
User avatar
unit
Member
Posts: 1831
Joined: Sat Nov 28, 2009 10:47 am
Location: Missouri, USA

#6

Post by unit »

Thanks guys. Nice to be back!
Thanks,
Ken (my real name)

...learning something new all the time.
Top
User avatar
D1omedes
Member
Posts: 1279
Joined: Sat Aug 22, 2009 8:54 pm
Location: Houston, Texas, USA

#7

Post by D1omedes »

Nice to hear you are doing well and enjoying your time away from the forums, Ken. I wish you luck with your future competition. :)
Top
User avatar
dbcad
Member
Posts: 3111
Joined: Fri Jan 08, 2010 2:59 pm
Location: ga, usa

#8

Post by dbcad »

Good to see you Ken :) I believe you will do well in competitive cutting. You already have a very solid understanding of what goes on at the edge :D

Hope to see more of you here :) :)
Charlie

" Everything should be made as simple as possible, but not one bit simpler."

[CENTER]"Integrity is being good even if no one is watching"[/CENTER]
Top
SpyderNut
Member
Posts: 8432
Joined: Fri Sep 24, 2004 10:33 am
Location: Hoosier Country, USA
Contact:
Contact SpyderNut

#9

Post by SpyderNut »

Welcome back, Ken, and congrats on your recent endeavor with competitive cutting. As you mentioned, this could be the beginning of new possibilities for Spyderco products. Hope to see you around again here soon. :)
:spyder: -Michael

"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
Top
User avatar
unit
Member
Posts: 1831
Joined: Sat Nov 28, 2009 10:47 am
Location: Missouri, USA

#10

Post by unit »

Oh, how I wish one of these was a Spyderco ;)

Image


Anyone who really knows me, knows that I rarely really smile in a photograph. This smile is the real deal...not a fake "cheese" ;)

Image
Thanks,
Ken (my real name)

...learning something new all the time.
Top
User avatar
Jazz
Member
Posts: 7678
Joined: Sun Jul 01, 2007 7:46 pm
Location: Alberta, Canada

#11

Post by Jazz »

I was wondering where you were! Good to hear from you. I hope you're still hiking with the boys and whittling.

Definitely wish you luck and safety in your Bladesports. Keep us posted.

- best wishes, Jazz.
Top
User avatar
unit
Member
Posts: 1831
Joined: Sat Nov 28, 2009 10:47 am
Location: Missouri, USA

#12

Post by unit »

Good to hear from you too Jazz.

Yeah, the boys and I are regularly getting out and doing something (though lately it has been crazy hot, and the ticks are a serious problem). They seem to really enjoy watching and filming cutting practice. Its amazing the level of understand and respect these boys have for blades...then again, they have grown up around them ;)
Thanks,
Ken (my real name)

...learning something new all the time.
Top
Fred Sanford
Member
Posts: 5736
Joined: Fri Jun 02, 2006 12:41 pm
Location: Ohio, USA

#13

Post by Fred Sanford »

Hey buddy, good to have ya back. You were one of the folks I wondered where they went. You always have good stuff to say and your comments are mostly spot on.

Stick around! :D
"I'm calling YOU ugly, I could push your face in some dough and make gorilla cookies." - Fred Sanford
Top
User avatar
Blerv
Member
Posts: 11906
Joined: Mon May 04, 2009 11:24 am

#14

Post by Blerv »

Welcome back friend :)
Top
User avatar
unit
Member
Posts: 1831
Joined: Sat Nov 28, 2009 10:47 am
Location: Missouri, USA

#15

Post by unit »

You guys are to kind! Thanks.

Hopefully I'll be able to stick around more.
Thanks,
Ken (my real name)

...learning something new all the time.
Top
User avatar
anagarika
Member
Posts: 1687
Joined: Sun Jul 15, 2012 5:59 pm

#16

Post by anagarika »

Ken,

Just joined the forum after getting a Resilience. Your posts over BF have been inspirational to my sharpening journey!

So just to say good luck in the competition!

You mentioned about beung certified, what it actually entails? As a tester? I thought it's the blades that's being tested .. Sorry, I know zero thing about these competition.

Regards,
Chris
Top
User avatar
unit
Member
Posts: 1831
Joined: Sat Nov 28, 2009 10:47 am
Location: Missouri, USA

#17

Post by unit »

You raise some good discussion points.

First off, thanks...I'm glad I offered some inspiration to you.

Second. In competition cutting the winner and the looser might well use the same knife. Said another way, the winner wins either because he is the best, or the best cutter made a mistake that allowed another to steal victory. These competitions are a test of the person, but this is not to say subtle advantages are not possible with superior cutlery.

Certification involves training and demonstration of fundamentals and safe practices. This can be a dangerous sport, we take safety seriously.

While conducting my certification requirements I had the opportunity to use my knife (the same model) and several of Donavon's knives (he is a two time national champ)...regardless of which knife I or he used, it was evident who the better cutter was ;)

Unfortunately, I was unable to capture all of the certification process, but I do have some of it in this video if you like.


http://www.youtube.com/watch?v=Iv51K55U ... ata_player
Thanks,
Ken (my real name)

...learning something new all the time.
Top
Post Reply

Return to “Spyderco General Discussion”