What Spyderco is in your pocket today??

[Mrj]

[sv4]

Wharncliffe Wednesday with the Equilibrium.

[Paul Ardbeg]

[SaltyCaribbeanDfly]

[Manixguy@1994]

MG2

[8th_Note]

New-to-me Paramilitary 2 in S90V with teal G10. I got it off of eBay for $95. It appears to be in great condition. The only flaws are a small nick in the spine and a slightly blunted tip. It was also very dirty, but it cleaned up nicely.

[TkoK83Spy]

New-to-me Paramilitary 2 in S90V with teal G10. I got it off of eBay for $95. It appears to be in great condition. The only flaws are a small nick in the spine and a slightly blunted tip. It was also very dirty, but it cleaned up nicely.

1000005037.jpg
1000005036.jpg

A nick in the spine, I'm guessing it's a factory second. Take a picture of the nick?

[8th_Note]

New-to-me Paramilitary 2 in S90V with teal G10. I got it off of eBay for $95. It appears to be in great condition. The only flaws are a small nick in the spine and a slightly blunted tip. It was also very dirty, but it cleaned up nicely.

1000005037.jpg
1000005036.jpg

A nick in the spine, I'm guessing it's a factory second. Take a picture of the nick?

No, it's not a 2nd. I have a factory 2nd PM2. This is an unintentional nick.

[Mrj]

Not quite the pocket but definitely putting in work

[5-by-5]

Wharnie Wednesday

[vivi]

Compared some fixed blades today.

Left to right: Landi EDC (A2), Landi Bushcraft FFG (A2), Spyderco Temperance Sprint (Cruwear), Mora Companion (Carbon).

Me and my hiking buddy agreed the Spyderco carved wood with the least effort, then the Mora, then the bushcrafter just behind the Mora, and finally the Landi EDC.

I'm sti in the process of converting the EDC to a convex grind. Show side is done except polishing but the back side needs more work, so the results didn't surprise there.

I was a bit surprised the Spyderco cut better than the Mora on wood carving. Guess I took it pretty thin at the edge bevel.

This comparison showed me I should be fine taking the Bushcrafter a touch thinner.

[sv4]

Throwback Thursday : original Lil’ Temperance from 2003.

[SaltyCaribbeanDfly]

[Paul Ardbeg]

What a shot

[Wartstein]

Still pretty new, but since I got it kind of glued to my rfp... Endela K390 SE. What a great workhorse!

[Evil D]

..these are a few of my favorites things!

[Manixguy@1994]

MG2

[TkoK83Spy]

[abbazaba]

[Nursewithablade]

Salty