P'Kal availability

Discuss Spyderco's products and history.
-c0de-
Member
Posts: 9
Joined: Tue Nov 30, 2021 2:10 pm

Re: P'Kal availability

#21

Post by -c0de- »

ZrowsN1s wrote:
Thu Dec 02, 2021 1:34 am
Maybe you'll have better luck. I hope you do, hard to find these.
Just got it. Fast shipping. The box wasn't 100% mint condition, but the knife sure was. Blade is centered and looks good. Looks super clean and untouched.

Definitely will make the new owner happy.
User avatar
ZrowsN1s
Member
Posts: 7554
Joined: Sat Jan 30, 2016 4:08 pm
Location: San Diego, California USA

Re: P'Kal availability

#22

Post by ZrowsN1s »

-c0de- wrote:
Sat Dec 04, 2021 2:50 pm
ZrowsN1s wrote:
Thu Dec 02, 2021 1:34 am
Maybe you'll have better luck. I hope you do, hard to find these.
Just got it. Fast shipping. The box wasn't 100% mint condition, but the knife sure was. Blade is centered and looks good. Looks super clean and untouched.

Definitely will make the new owner happy.
Glad to hear it. Did it open and close smoothly? Mine wouldn't close one handed, and opening was ridiculously stiff.

The bad customer service is enough to keep me from buying from them, but it least it sounds like you got a good knife.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-c0de-
Member
Posts: 9
Joined: Tue Nov 30, 2021 2:10 pm

Re: P'Kal availability

#23

Post by -c0de- »

ZrowsN1s wrote:
Mon Dec 06, 2021 1:49 pm
Glad to hear it. Did it open and close smoothly? Mine wouldn't close one handed, and opening was ridiculously stiff.

The bad customer service is enough to keep me from buying from them, but it least it sounds like you got a good knife.
It opens fairly good. It opens without any stiffness or tension, so I think the mechanism works correctly, but I know that was a complaint about this knife, was not having the insanely smooth opening of something like a Yojimbo.

Granted, the person who is getting this as a gift will be using it as an EDC Defensive knife, so pretty sure 99% of the time will be using the wave feature to open it.
User avatar
ZrowsN1s
Member
Posts: 7554
Joined: Sat Jan 30, 2016 4:08 pm
Location: San Diego, California USA

Re: P'Kal availability

#24

Post by ZrowsN1s »

-c0de- wrote:
Mon Dec 06, 2021 2:03 pm
ZrowsN1s wrote:
Mon Dec 06, 2021 1:49 pm
Glad to hear it. Did it open and close smoothly? Mine wouldn't close one handed, and opening was ridiculously stiff.

The bad customer service is enough to keep me from buying from them, but it least it sounds like you got a good knife.
It opens fairly good. It opens without any stiffness or tension, so I think the mechanism works correctly, but I know that was a complaint about this knife, was not having the insanely smooth opening of something like a Yojimbo.

Granted, the person who is getting this as a gift will be using it as an EDC Defensive knife, so pretty sure 99% of the time will be using the wave feature to open it.
I have 2 P'kals and a trainer. 2 out of three are butter smooth. The other one could be a little smoother.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-c0de-
Member
Posts: 9
Joined: Tue Nov 30, 2021 2:10 pm

Re: P'Kal availability

#25

Post by -c0de- »

ZrowsN1s wrote:
Mon Dec 06, 2021 3:45 pm
I have 2 P'kals and a trainer. 2 out of three are butter smooth. The other one could be a little smoother.
I haven't looked yet, but any guides on smoothing it up some?

I'd rather have the recipient not have to do a single thing to it.
User avatar
ZrowsN1s
Member
Posts: 7554
Joined: Sat Jan 30, 2016 4:08 pm
Location: San Diego, California USA

Re: P'Kal availability

#26

Post by ZrowsN1s »

-c0de- wrote:
Mon Dec 06, 2021 3:56 pm
ZrowsN1s wrote:
Mon Dec 06, 2021 3:45 pm
I have 2 P'kals and a trainer. 2 out of three are butter smooth. The other one could be a little smoother.
I haven't looked yet, but any guides on smoothing it up some?

I'd rather have the recipient not have to do a single thing to it.
Knife Pivot Lube. These are older models mostly so they are loctited good.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-c0de-
Member
Posts: 9
Joined: Tue Nov 30, 2021 2:10 pm

Re: P'Kal availability

#27

Post by -c0de- »

ZrowsN1s wrote:
Tue Dec 07, 2021 8:10 pm
Knife Pivot Lube. These are older models mostly so they are loctited good.
Thanks! Will do!
User avatar
sal
Member
Posts: 17999
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: P'Kal availability

#28

Post by sal »

Hi C0de,

Welcome to our forum.

sal
guacorilla
Member
Posts: 20
Joined: Sun Sep 19, 2021 8:28 pm

Re: P'Kal availability

#29

Post by guacorilla »

Bumping an old thread but I just noticed that several reputable online sites have it listed as a preorder. Does that mean that I can expect it actually return? I thought the P'Kal was long discontinued
hunting an original Yojimbo. My hopes to find one dwindle with each day. :usflag
Mr_Whiskerz
Member
Posts: 113
Joined: Fri Dec 02, 2005 3:30 pm

Re: P'Kal availability

#30

Post by Mr_Whiskerz »

guacorilla wrote:
Sat Aug 03, 2024 3:08 pm
Bumping an old thread but I just noticed that several reputable online sites have it listed as a preorder. Does that mean that I can expect it actually return? I thought the P'Kal was long discontinued
Batches are made every so often, so you should be able to get one eventually. I've seen Sal post on here before when they're in stock on sypderco.com. I have no idea how often they're made and how large the batches are, I'm sure someone will chime in though.
guacorilla
Member
Posts: 20
Joined: Sun Sep 19, 2021 8:28 pm

Re: P'Kal availability

#31

Post by guacorilla »

Mr_Whiskerz wrote:
Sun Aug 04, 2024 12:00 pm
guacorilla wrote:
Sat Aug 03, 2024 3:08 pm
Bumping an old thread but I just noticed that several reputable online sites have it listed as a preorder. Does that mean that I can expect it actually return? I thought the P'Kal was long discontinued
Batches are made every so often, so you should be able to get one eventually. I've seen Sal post on here before when they're in stock on sypderco.com. I have no idea how often they're made and how large the batches are, I'm sure someone will chime in though.
Oh whoa! Thanks! Thats awesome news. I am going to sit tight for one and not overpay. Thank you!
hunting an original Yojimbo. My hopes to find one dwindle with each day. :usflag
Post Reply