MT35P - CPM MagnaCut Mule Team - Release Date
-
- Member
- Posts: 5860
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Wow. Took off work to try. Now 30 minutes later and I still haven't gotten anywhere. I can't take off all day, so I suppose I'll miss this one.
I'm not one to get overly frustrated about missing out on things like this, but I have to say that it's hard to not be annoyed. Anyone could have predicted this. I hope that Spyderco finally takes the lesson to update and improve whatever they need to to make sure this does not happen again. It's really off-putting.
Sigh.
Okay, back to work.
I'm not one to get overly frustrated about missing out on things like this, but I have to say that it's hard to not be annoyed. Anyone could have predicted this. I hope that Spyderco finally takes the lesson to update and improve whatever they need to to make sure this does not happen again. It's really off-putting.
Sigh.
Okay, back to work.
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Wow, what a train wreck. I was able to select 2 and add them to my cart. Then after a long delay I got a form where I clicked "checkout now". Then 33 minutes later I get to verify my billing info. 5 minutes later (39 minutes after first selecting 2) it is asking for credit card info. Then I get:
Notice: Undefined index: message in /var/www/vhosts/spyderco.com/httpdocs/catalog/order3.php on line 386
Which would indicate some kind of bug in their website PHP code. It is 9:50 right now and the website is still balky and no telling if this order is going through or what is really going on. I've never seen or been through anything like this online.
(see below, order went through at 9:54 and I got email confirmation)
Notice: Undefined index: message in /var/www/vhosts/spyderco.com/httpdocs/catalog/order3.php on line 386
Which would indicate some kind of bug in their website PHP code. It is 9:50 right now and the website is still balky and no telling if this order is going through or what is really going on. I've never seen or been through anything like this online.
(see below, order went through at 9:54 and I got email confirmation)
Last edited by Tucson Tom on Fri Dec 03, 2021 10:59 am, edited 1 time in total.
-
- Member
- Posts: 17
- Joined: Mon Nov 22, 2021 5:36 pm
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Just got order accepted at 9:52....been trying since 9
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Order also just went through
-
- Member
- Posts: 557
- Joined: Thu Oct 07, 2021 3:07 am
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Keep trying folks! Mine failed numerous times and just now I finally got it to go through! My son is going to be pumped!
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Someone needs a better site/server support I guess...
Last edited by AlexRus on Fri Dec 03, 2021 11:06 am, edited 1 time in total.
Re: MT35P - CPM MagnaCut Mule Team - Release Date
WOW, mine just went thru using a VPN. Gotta be a miracle.... all I can say for everyone is keep trying!
I selected the VPN I have closest to Colorado to have a greater chance at it and I think it worked, cuz my other connection is from Canada and I can't even load the www.spyderco.com page with it...
I selected the VPN I have closest to Colorado to have a greater chance at it and I think it worked, cuz my other connection is from Canada and I can't even load the www.spyderco.com page with it...
Re: MT35P - CPM MagnaCut Mule Team - Release Date
It took me 51 minutes to checkout due to countless declined checkouts...
The declining is not coming from my credit card. It’s the Spyderco checkout process.
Don’t give up!!!!
The declining is not coming from my credit card. It’s the Spyderco checkout process.
Don’t give up!!!!
Have: old S30V Native, HAP40 Endura, ZDP DF2, S110V Manix LW, Cru-wear Para 3, SE H1 DF2, S90V Native 5, K390 Urban, SE Pac Salt, P.I.T.S., XHP Manix LW, SB Caly 3, B70P, PMA11, K03, Kapara, REX 45 Military, 154CM Manix LW, Swick, AEB-L Urban, KC Cruwear Manix, M390 PM2, Mantra 2, CruCarta Shaman, M390 Manix, K390 Police 4, S90V Manix LW, Rex 45 Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP, Cruwear Manix, Cruwear Manix, M4 Chief, Z-max!!!
Want: SPY27, K490, Swick 5.
Want: SPY27, K490, Swick 5.
-
- Member
- Posts: 50
- Joined: Mon Jan 25, 2021 8:27 am
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Success. That was the most difficult mule to purchase by far.
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Looks like they all went thru at the same time !!!
-
- Member
- Posts: 5860
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: MT35P - CPM MagnaCut Mule Team - Release Date
I had to turn off my VPN.VipeX wrote: ↑Fri Dec 03, 2021 10:54 amWOW, mine just went thru using a VPN. Gotta be a miracle.... all I can say for everyone is keep trying!
I selected the VPN I have closest to Colorado to have a greater chance at it and I think it worked, cuz my other connection is from Canada and I can't even load the www.spyderco.com page with it...
Wonder of Wonders, It worked!
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
-
- Member
- Posts: 84
- Joined: Sat Feb 25, 2017 11:09 am
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Echoing above - I just got through as well - 53minutes of refresh/resubmit.
That was.....a process.
-BS
That was.....a process.
-BS
: H1, M4, 4v, 10v, Hap40, s90v, s110v, BD1n, Maxamet, Magnacut
MT; Z-max, Z-wear, Magnacut, SRS13, Rex76, M398, T15, K294, ZDP-189, HIC, AEB-L, SPY27, 15v
Other: D2, White#1, Blue#2, SuperBlue, VG-10, 204P, 20cv, s30v, s35vn, s45vn, s90v, HIC, TC71
MT; Z-max, Z-wear, Magnacut, SRS13, Rex76, M398, T15, K294, ZDP-189, HIC, AEB-L, SPY27, 15v
Other: D2, White#1, Blue#2, SuperBlue, VG-10, 204P, 20cv, s30v, s35vn, s45vn, s90v, HIC, TC71
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Order confirmed with email. Scored 2. Keep trying, eventually it will work for you guys too!
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
-
- Member
- Posts: 406
- Joined: Sat Sep 24, 2016 11:01 pm
- Location: Mission, KS
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Wow, once I put in my cc info and then stopped looking, it went through. That old saying about a watched pot may be right!
Re: MT35P - CPM MagnaCut Mule Team - Release Date
also went through! attempt mabye 40, no exaggeration. keep trying!
Re: MT35P - CPM MagnaCut Mule Team - Release Date
And before you ask: FOMO............
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: MT35P - CPM MagnaCut Mule Team - Release Date
53min. I give up. We know there will be plenty available on the secondary market for $500 bucks haha You never truly miss a drop and the flippers know it! I haven't missed one I've wanted in a long time so I suppose it was finally my time to miss out on one. Just extra money in the pocket to spend at SFO on a regular production model tn when the mule hype is over haha
I collect them all, and use them all! I use the excuse, "I'm trying to find the perfect one", but in reality, they are all perfect in their own way!
Re: MT35P - CPM MagnaCut Mule Team - Release Date
Holy Cow. Thank you to all who encouraged. Got my email confirmation!!!!!
8Cr13MoV:N690Co:VG10:S30V:S35VN:S45VN:Elmax:SPY27:H1:LC200N:4V:MagnaCut:CTS-XHP:204P:M390:20CV:Cru-Wear:Z-Wear:M4:Rex-45:10V:K390:15V:S90V:Z-Max:Maxamet