Next Reveal Anticipation

[RamZar]

Have to check for previous reveal deliverables though.

Quite a few in the deliverable pipeline:

1. Autonomy2 LC200N Black DLC Blade CombinationEdge Black G-10 C165GPSBBK2 (USA)
2. Lil' Native SlipIt CPM-S30V Black G-10 C230NLGP (USA)
3. ParaMilitary2 CPM-CRUWEAR Brown Micarta C81MPCW2 (USA)
4. Swick5 Large PlainEdge LC200N Black G-10 Boltaron Sheath FB14P5 (USA)
5. Swick5 Large SpyderEdge LC200N Black G-10 Boltaron Sheath FB14S5 (USA)
6. Swick6 Small PlainEdge LC200N Black G-10 Boltaron Sheath FB14P6 (USA)
7. Swick6 Small SpyderEdge LC200N Black G-10 Boltaron Sheath FB14S6 (USA)
8. UK PenKnife (UKPK) SlipIt LC200N SpyderEdge Yellow FRN C94SYL (USA)
9. YoJumbo All-Black CPM-S30V Black DLC Blade Black G-10 C253GPBBK (USA)
10. Delica4 LightWeight K390 Wharncliffe Blade Blue FRN C11FPWK390 (Japan)
11. Delica4 LightWeight K390 SpyderEdge Blade Blue FRN C11FSK390 (Japan)
12. Dragonfly2 LightWeight K390 Wharncliffe Blade Blue FRN C28FP2WK390 (Japan)
13. Endela LightWeight K390 SpyderEdge Blade Blue FRN C243FSK390 (Japan)
14. Endela Lightweight Thin Blue Line VG-10 CombinationEdge Black/Blue FRN C243FPSBKBL (Japan)
15. Endela Lightweight Thin Red Line VG-10 CombinationEdge Black/Red FRN C243FPSBKRD (Japan)
16. Endura4 LightWeight K390 SpyderEdge Blade Blue FRN C10FSK390 (Japan)
17. Endura4 Lightweight Thin Red Line VG-10 CombinationEdge Black/Red FRN C10FPSBKRD (Japan)
18. ManBug Wharncliffe SpyderEdge VG-10 Black FRN MBKWS (Japan)
19. Police4 Lightweight SpyderEdge K390 Blue FRN C07FS4K390 (Japan)
20. Resilience Lightweight 8Cr13MoV PlainEdge Satin Blade Black FRN C142PBK (China)
21. Resilience Lightweight 8Cr13MoV CombinationEdge Satin Blade Black FRN C142PSBK (China)
22. Resilience Lightweight 8Cr13MoV SpyderEdge Satin Blade Black FRN C142SBK (China)
23. Resilience Lightweight 8Cr13MoV PlainEdge Black Blade Black FRN C142PBBK (China)
24. Resilience Lightweight 8Cr13MoV CombinationEdge Black Blade Black FRN C142PSBBK (China)
25. Resilience Lightweight 8Cr13MoV SpyderEdge Black Blade Black FRN C142SBBK (China)
26. Resilience Lightweight CPM-S35VN PlainEdge Satin Blade Blue FRN C142PBL (China)
27. Resilience Lightweight CPM-S35VN CombinationEdge Satin Blade Blue FRN C142PSBL (China)
28. Resilience Lightweight CPM-S35VN SpyderEdge Satin Blade Blue FRN C142SBL (China)

[Bolster]

Is the screw construction LW Caly on the horizon yet?

[DansGearAddiction]

My (total) guesses:

- Dragonfly 2 Salt 2 (LC200N)
- UKPK or Urban sprint
- Chaparral scale sprint
- Mule Team Magnacut
- Manix, Native or Shaman in K390
- PM 2/Para 3 sprint (Z-Wear or Z-Max)
- Some sort of flash batch of a past knife

[JRinFL]

This next reveal should reveal when the previously revealed knives will eventually reveal themselves!

I think there are enough knives that have not made it to market from the last three reveals to fill a reveal by themselves.

[kennethsime]

Crucarta Military 2 Sprint, with a RIL.

[nerdlock]

Have to check for previous reveal deliverables though.

Quite a few in the deliverable pipeline:

1. Autonomy2 LC200N Black DLC Blade CombinationEdge Black G-10 C165GPSBBK2 (USA)
2. Lil' Native SlipIt CPM-S30V Black G-10 C230NLGP (USA)
3. ParaMilitary2 CPM-CRUWEAR Brown Micarta C81MPCW2 (USA)
4. Swick5 Large PlainEdge LC200N Black G-10 Boltaron Sheath FB14P5 (USA)
5. Swick5 Large SpyderEdge LC200N Black G-10 Boltaron Sheath FB14S5 (USA)
6. Swick6 Small PlainEdge LC200N Black G-10 Boltaron Sheath FB14P6 (USA)
7. Swick6 Small SpyderEdge LC200N Black G-10 Boltaron Sheath FB14S6 (USA)
8. UK PenKnife (UKPK) SlipIt LC200N SpyderEdge Yellow FRN C94SYL (USA)
9. YoJumbo All-Black CPM-S30V Black DLC Blade Black G-10 C253GPBBK (USA)
10. Delica4 LightWeight K390 Wharncliffe Blade Blue FRN C11FPWK390 (Japan)
11. Delica4 LightWeight K390 SpyderEdge Blade Blue FRN C11FSK390 (Japan)
12. Dragonfly2 LightWeight K390 Wharncliffe Blade Blue FRN C28FP2WK390 (Japan)
13. Endela LightWeight K390 SpyderEdge Blade Blue FRN C243FSK390 (Japan)
14. Endela Lightweight Thin Blue Line VG-10 CombinationEdge Black/Blue FRN C243FPSBKBL (Japan)
15. Endela Lightweight Thin Red Line VG-10 CombinationEdge Black/Red FRN C243FPSBKRD (Japan)
16. Endura4 LightWeight K390 SpyderEdge Blade Blue FRN C10FSK390 (Japan)
17. Endura4 Lightweight Thin Red Line VG-10 CombinationEdge Black/Red FRN C10FPSBKRD (Japan)
18. ManBug Wharncliffe SpyderEdge VG-10 Black FRN MBKWS (Japan)
19. Police4 Lightweight SpyderEdge K390 Blue FRN C07FS4K390 (Japan)
20. Resilience Lightweight 8Cr13MoV PlainEdge Satin Blade Black FRN C142PBK (China)
21. Resilience Lightweight 8Cr13MoV CombinationEdge Satin Blade Black FRN C142PSBK (China)
22. Resilience Lightweight 8Cr13MoV SpyderEdge Satin Blade Black FRN C142SBK (China)
23. Resilience Lightweight 8Cr13MoV PlainEdge Black Blade Black FRN C142PBBK (China)
24. Resilience Lightweight 8Cr13MoV CombinationEdge Black Blade Black FRN C142PSBBK (China)
25. Resilience Lightweight 8Cr13MoV SpyderEdge Black Blade Black FRN C142SBBK (China)
26. Resilience Lightweight CPM-S35VN PlainEdge Satin Blade Blue FRN C142PBL (China)
27. Resilience Lightweight CPM-S35VN CombinationEdge Satin Blade Blue FRN C142PSBL (China)
28. Resilience Lightweight CPM-S35VN SpyderEdge Satin Blade Blue FRN C142SBL (China)

Geez I actually thought the list would be a bit shorter than this!!!

[SG89]

This next reveal should reveal when the previously revealed knives will eventually reveal themselves!

I think there are enough knives that have not made it to market from the last three reveals to fill a reveal by themselves.

[Doc Dan]

Is the screw construction LW Caly on the horizon yet?

I hope so.

[Doc Dan]

I am hoping for a Dragonfly Salt with LC200N.

[God'sMyJudge]

Anyone know what was last year's third reveal release date was?

[samdasnake]

Is the screw construction LW Caly on the horizon yet?

I hope so.

Me too! Super excited about that one

[RamZar]

Anyone know what was last year's third reveal release date was?

Reveal Vol. 6 was released on September 9, 2020.


All Past Spyderco Reveal Volumes:

1. Reveal #1 — January 11, 2019
2. Reveal #2 — May 2, 2019
3. Reveal #3 — September 16, 2019
4. Reveal #4 — January 15, 2020
5. Reveal #5 — May 5, 2020
6. Reveal #6 — September 9, 2020
7. Reveal #7 — January 19, 2021
8. Reveal #8 — May 11, 2021

[nerdlock]

LC200N DF2

all black, please.

For my part, I'd love a black ticn LC200N blade with toxic green FRN, as a homage to that USN Catcherman exclusive!

[kobold]

I would like SE versions of the Military, the Chief and the Chaparral, but after looking at the big to-do list above, this reveal could be as anticlimactic as the last one was.

[wrdwrght]

Something unexpected from all those protos? Please?

[wrdwrght]

Anyone know what was last year's third reveal release date was?

Reveal Vol. 6 was released on September 9, 2020.


All Past Spyderco Reveal Volumes:

1. Reveal #1 — January 11, 2019
2. Reveal #2 — May 2, 2019
3. Reveal #3 — September 16, 2019
4. Reveal #4 — January 15, 2020
5. Reveal #5 — May 5, 2020
6. Reveal #6 — September 9, 2020
7. Reveal #7 — January 19, 2021
8. Reveal #8 — May 11, 2021

Thanks for calling out this pattern.

[RustyIron]

I think there are enough knives that have not made it to market from the last three reveals to fill a reveal by themselves.

I wonder if revealed knives ever just fall off the list and fade away. It's conceivable that a knife that would receive a lot of enthusiasm a year ago, might be eclipsed by improved designs and materials, or natural waning of customer enthusiasm.

[tonijedi]

LC200N DF2

all black, please.

Yes, please.

[ladybug93]

last year, i bought a caribbean for national knife day. i've been carrying it a lot since then. realistically, it could be my last knife and i'd be fine. however, i'd love to buy something else i've been eyeballing from spyderco again this year. everything is out of stock though. all the knives i want from spyderco are either out of stock or in the reveal queue.

it would've been amazing if something like the ayoob model that's been discussed was released for national knife day, but at this point, i'd be happy with any number of regular production knives being in stock as if they were regularly produced.

[StuntZombie]

I'm really hoping for a Rockjumper in LC200N. The handle on this thing is still my favorite out of all the Spyderco's I've owned or handled, and a Salt version could feasibly be the last knife I ever "need" to buy.