BladeHQ Exclusive Smock - Natural G10 and M4

Discuss Spyderco's products and history.
notfixingit
Member
Posts: 103
Joined: Wed Jun 09, 2021 3:29 pm
Location: Hot as ****

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#81

Post by notfixingit »

Just got mine in the mail, feels and looks good, although this is the first spyderco out of the box where I though, hrrm I might need to tighten the pivot a bit (bounces on close).
----------------------------------------------------
Spyderco and Tops enthusiast
Obsessed with DLC Cruwear for some reason
Knives, Guns, and Watches, yes please

- Tom aka NotFixingIT
Signalman1
Member
Posts: 85
Joined: Wed Jun 10, 2020 12:07 pm

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#82

Post by Signalman1 »

I got mine today shipped super fast :)

Image

Signalman :mad: :) :D
User avatar
Henry_P
Member
Posts: 275
Joined: Mon Dec 07, 2020 11:54 am
Location: California

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#83

Post by Henry_P »

I don’t know if anyone has read their paperwork that came with their smock but I thought this was interesting.

“A truly remarkable rendition of one of Spyderco’s most dynamic models, this exclusive Smock folder is available in two versions: one with a satin-finished blade and matching handle hardware and one with a black Diamond-like Carbon (DLC) coated blade and black-coated handle hardware and clip. Both are sure to please both serious end users and collectors alike”

I think this pretty much confirms a future DLC version.
Para 3 Maxamet | Para 3 CruWear DLC | Smock M4 Jade G-10 | Shaman Z-Wear Micarta | Salt 2 LC200N Wharnie | Chaparral Birdseye Maple | Lil’ Native S90V CF | Dragonfly 2 20CV | Ladybug K390 | CRK Small Sebenza 31 S45VN PJ
User avatar
Danke
Member
Posts: 755
Joined: Tue Jul 21, 2015 10:05 pm

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#84

Post by Danke »

notfixingit wrote:
Mon Jul 12, 2021 11:04 am
Danke wrote:
Sun Jul 11, 2021 2:08 pm
I don't see any of the Blade HQ Smocks on eBay yet. Usually the flippers will have them listed there as soon as they finish the purchase.

There is a DLT one for $468!
Several up for $300-350 as of at least last night
Well hopefully the fact there's a second one in black DLC coming too will dissuade sales.
aquaseafoamshaman
Member
Posts: 54
Joined: Fri Jan 22, 2021 2:10 pm

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#85

Post by aquaseafoamshaman »

I would think the DLC one will be even more difficult to get, as there are tons of comments about waiting for/hoping for/demanding a DLC version.
Michael Janich
Member
Posts: 3026
Joined: Fri Sep 24, 2004 10:33 am
Location: Longmont, CO USA
Contact:

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#86

Post by Michael Janich »

Hey, All:

The black-bladed Smock Exclusive for Blade HQ is not a DLC coating; it's titanium carbonitride (TiCN). I wrote the letter and the error in it was mine. I have corrected it and future shipments of knives from Spyderco will contain the corrected letter.

I apologize for the error and any confusion it may have caused.

Stay safe,

Mike
User avatar
Henry_P
Member
Posts: 275
Joined: Mon Dec 07, 2020 11:54 am
Location: California

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#87

Post by Henry_P »

Michael Janich wrote:
Tue Jul 13, 2021 11:11 am
Hey, All:

The black-bladed Smock Exclusive for Blade HQ is not a DLC coating; it's titanium carbonitride (TiCN). I wrote the letter and the error in it was mine. I have corrected it and future shipments of knives from Spyderco will contain the corrected letter.

I apologize for the error and any confusion it may have caused.

Stay safe,

Mike

Thank you Mr. Janich for clearing that up. Is the Golden, CO factory the only one that uses DLC coated blades?
Para 3 Maxamet | Para 3 CruWear DLC | Smock M4 Jade G-10 | Shaman Z-Wear Micarta | Salt 2 LC200N Wharnie | Chaparral Birdseye Maple | Lil’ Native S90V CF | Dragonfly 2 20CV | Ladybug K390 | CRK Small Sebenza 31 S45VN PJ
User avatar
Sharp Guy
Member
Posts: 8611
Joined: Tue Jan 26, 2016 2:19 pm
Location: DFW, TX (orig. from N. IL)

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#88

Post by Sharp Guy »

Michael Janich wrote:
Tue Jul 13, 2021 11:11 am
Hey, All:

The black-bladed Smock Exclusive for Blade HQ is not a DLC coating; it's titanium carbonitride (TiCN). I wrote the letter and the error in it was mine. I have corrected it and future shipments of knives from Spyderco will contain the corrected letter.

I apologize for the error and any confusion it may have caused.

Stay safe,

Mike
Mike, are all the coated blades coming out of the Taichung plant TiCN?

EDIT: sorry Henry_P! I just noticed my question was basically the same as yours
Of all the things I've lost I miss my mind the most!
Michael Janich
Member
Posts: 3026
Joined: Fri Sep 24, 2004 10:33 am
Location: Longmont, CO USA
Contact:

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#89

Post by Michael Janich »

Dear Henry_P and Sharp Guy:

The answer to both of your questions is yes.

Although I've explained this previously, to ensure that there's no confusion, here is a quick guide to our blade coatings as they relate to country of manufacture:

DLC - US-made products only
TiCN - Most of our Japanese-made knives with blade coatings and all our black-bladed knives made in Taiwan
Ceramic - This coating is only used on the Perrin Street Bowie and Street Beat Lightweight, both made in Japan
Black Oxide - All our Chinese-made knives

I hope this helps.

Stay safe,

Mike
sn0wman72
Member
Posts: 225
Joined: Sat Nov 04, 2017 6:06 pm

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#90

Post by sn0wman72 »

Henry_P wrote:
Mon Jul 12, 2021 9:21 pm
I don’t know if anyone has read their paperwork that came with their smock but I thought this was interesting.

“A truly remarkable rendition of one of Spyderco’s most dynamic models, this exclusive Smock folder is available in two versions: one with a satin-finished blade and matching handle hardware and one with a black Diamond-like Carbon (DLC) coated blade and black-coated handle hardware and clip. Both are sure to please both serious end users and collectors alike”

I think this pretty much confirms a future DLC version.
I have never read the paperwork in a SpyderCo knife box...I wonder what else I have missed :)
aquaseafoamshaman
Member
Posts: 54
Joined: Fri Jan 22, 2021 2:10 pm

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#91

Post by aquaseafoamshaman »

Mine arrived this morning. The 2nd detent and lanyard tube were just removed and a Lynch clip and some Gunny Glide have been added. It's darn near perfect. Thanks to all that made this run happen.
dkelley661
Member
Posts: 78
Joined: Sat May 15, 2021 6:09 am

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#92

Post by dkelley661 »

What is the advantage of removing the lanyard tube?
User avatar
ZrowsN1s
Member
Posts: 7404
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#93

Post by ZrowsN1s »

Carrying my 20CV smock this morning. Sure is a fun knife to open and close. And you can cut stuff with it too :D
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
User avatar
PStone
Member
Posts: 2474
Joined: Thu Nov 09, 2017 7:31 pm
Location: Illinois

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#94

Post by PStone »

dkelley661 wrote:
Wed Jul 14, 2021 7:25 am
What is the advantage of removing the lanyard tube?
I could be wrong, but most likely it just eliminates a rattle sound that Taichung layard tubes are known for. I don't think they flare them at all. I usually just put a dab of grease or locktite to stop it. But like I said, I could be wrong, and there may be another benefit I am unaware of.
aquaseafoamshaman
Member
Posts: 54
Joined: Fri Jan 22, 2021 2:10 pm

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#95

Post by aquaseafoamshaman »

I tore down my first Smock enough times that I just quit putting the lanyard tube back in.
rashman
Member
Posts: 168
Joined: Wed Aug 12, 2020 6:20 pm
Location: Central Oregon

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#96

Post by rashman »

mine showed up on monday, jumped in my pocket and has been with me since.
don’t know how i got the super fast delivery - i went for the free first class shipping, nice work USPS.
i miss the days of havin a knife store locally, so i end up watching all the videos and reading the fourms and sometimes ya end up forming an opinion before you can check the thing out.
wow, the Smock really exceeded my expectations - i had concerns about its handle shape and blade ‘choil’ because of my XL hands - this is definitely a model to check out.
mine came super sharp! goes thru plastic like a hot knife thru butter - and the slim carry makes my pm2 feel like a total pocket hog - lol (pm2 has been my primary carry for years - was my first spyderco and the beginning of the addiction.)
this Smock is a keeper and a user.
random observation - for some mysterious reason it doesn’t disturb the knife phobic folks….
current fav’s: K390 SS Stretch, PM2 CruWear Mircata, P.I.T.S., Subway Bowie
fixall
Member
Posts: 733
Joined: Sun Jun 24, 2018 3:45 am

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#97

Post by fixall »

I'm about to throw mine together. :D

Image
notfixingit
Member
Posts: 103
Joined: Wed Jun 09, 2021 3:29 pm
Location: Hot as ****

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#98

Post by notfixingit »

fixall wrote:
Wed Jul 21, 2021 3:10 pm
I'm about to throw mine together. :D

Image
Please post when your done =) I need to do something to mine, just not sure what yet.. little TOO much shiny silver for my taste, almost makes it look like a toy.. maybe just a black clip would help or something lol
----------------------------------------------------
Spyderco and Tops enthusiast
Obsessed with DLC Cruwear for some reason
Knives, Guns, and Watches, yes please

- Tom aka NotFixingIT
fixall
Member
Posts: 733
Joined: Sun Jun 24, 2018 3:45 am

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#99

Post by fixall »

All done customizing the M4 Smock.

I couldn't be happier with how it turned out. The action is amazing, centering is perfect, and I think it looks fantastic. :)

Image
Image
Image
Image
Image
notfixingit
Member
Posts: 103
Joined: Wed Jun 09, 2021 3:29 pm
Location: Hot as ****

Re: BladeHQ Exclusive Smock - Natural G10 and M4

#100

Post by notfixingit »

Looks awesome!
----------------------------------------------------
Spyderco and Tops enthusiast
Obsessed with DLC Cruwear for some reason
Knives, Guns, and Watches, yes please

- Tom aka NotFixingIT
Post Reply