Is this normal for a k390 Endura?
Is this normal for a k390 Endura?
The seller said it was new but it looks like there is black sharpie on the back. There is also already a patina. Should i ask for a partial refund? It is from ebay.
"Some call me...Tim?"
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Is this normal for a k390 Endura?
That black strip is wrong and the blue color appears to be wrong for the K390 version. The K390 appears to be stamped and not etched. My gut tells me this is not real or some kind of Frankenknife made from parts.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Is this normal for a k390 Endura?
“”Think of an edge as a living thing that comes and goes, born, get's old, is reborn.””
SAL :spyder:
“ The best laid schemes o’ Mice an’ Men”
SAL :spyder:
“ The best laid schemes o’ Mice an’ Men”
Re: Is this normal for a k390 Endura?
It feels real. It must be a good fake. I read the description the seller said he acid etched it.
"Some call me...Tim?"
Re: Is this normal for a k390 Endura?
The inside is blue so it looks like he sharpied it.
"Some call me...Tim?"
-
- Member
- Posts: 5860
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: Is this normal for a k390 Endura?
I don't know whether or not it is fake, but I certainly wouldn't be calling it new, if he's been acid etching it. It also has an aftermarket clip.
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
Re: Is this normal for a k390 Endura?
He advertised it with the clip. He said it was a Lynch. A magnet didn't stick to it.The Meat man wrote: ↑Thu May 13, 2021 1:38 pmI don't know whether or not it is fake, but I certainly wouldn't be calling it new, if he's been acid etching it. It also has an aftermarket clip.
"Some call me...Tim?"
Re: Is this normal for a k390 Endura?
Agreed, a straight out of the box is $131.50 , the one I found acid etched and changed clip was $160? How much you pay for it ? Seller have a return policy?The Meat man wrote: ↑Thu May 13, 2021 1:38 pmI don't know whether or not it is fake, but I certainly wouldn't be calling it new, if he's been acid etching it. It also has an aftermarket clip.
“”Think of an edge as a living thing that comes and goes, born, get's old, is reborn.””
SAL :spyder:
“ The best laid schemes o’ Mice an’ Men”
SAL :spyder:
“ The best laid schemes o’ Mice an’ Men”
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Is this normal for a k390 Endura?
Your last picture shows the color better and it looks correct. Can you get a better picture of the tang where it says K390?
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Is this normal for a k390 Endura?
It’s real :rolleyes: Knives plus has some that are modified and a look 100% likes the OP
“” The MODIFIED Spyderco K390 Endela Lightweight Knife, a mid size EDC that ups the ante, features an ACID STONEWASHED 3.41 inch drop point blade made of Bohler-Uddeholm K390 tool steel, .118 inch thick, with a full flat grind, a thumb ramp for secure grip, and the Spyderco hole for ambidextrous one hand opening. The blue FRN (fiberglass nylon resin) handle has been given a black Rit Dye fade starting from the pivot. The dye steadily fades toward the acid stonewashed pocket clip which has also been heat colored. ””
:rolleyes: Trix are for kids
“”Think of an edge as a living thing that comes and goes, born, get's old, is reborn.””
SAL :spyder:
“ The best laid schemes o’ Mice an’ Men”
SAL :spyder:
“ The best laid schemes o’ Mice an’ Men”
Re: Is this normal for a k390 Endura?
117 without tax and shipping and 129.75 with. It was an auctionS-3 ranch wrote: ↑Thu May 13, 2021 1:52 pmAgreed, a straight out of the box is $131.50 , the one I found acid etched and changed clip was $160? How much you pay for it ? Seller have a return policy?The Meat man wrote: ↑Thu May 13, 2021 1:38 pmI don't know whether or not it is fake, but I certainly wouldn't be calling it new, if he's been acid etching it. It also has an aftermarket clip.
"Some call me...Tim?"
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Is this normal for a k390 Endura?
**Incorrect see below**
It's not a KP modified knife, at least from what I see on their site. KP knives have better blade finish and I have not yet seen one in anything other that VG-10. If the OP is good with it, that's all that counts.
It's not a KP modified knife, at least from what I see on their site. KP knives have better blade finish and I have not yet seen one in anything other that VG-10. If the OP is good with it, that's all that counts.
Last edited by JRinFL on Thu May 13, 2021 2:23 pm, edited 1 time in total.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Is this normal for a k390 Endura?
Can you post a link?S-3 ranch wrote: ↑Thu May 13, 2021 2:03 pmIt’s real :rolleyes: Knives plus has some that are modified and a look 100% likes the OP
“” The MODIFIED Spyderco K390 Endela Lightweight Knife, a mid size EDC that ups the ante, features an ACID STONEWASHED 3.41 inch drop point blade made of Bohler-Uddeholm K390 tool steel, .118 inch thick, with a full flat grind, a thumb ramp for secure grip, and the Spyderco hole for ambidextrous one hand opening. The blue FRN (fiberglass nylon resin) handle has been given a black Rit Dye fade starting from the pivot. The dye steadily fades toward the acid stonewashed pocket clip which has also been heat colored. ””
:rolleyes: Trix are for kids
"Some call me...Tim?"
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Is this normal for a k390 Endura?
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Is this normal for a k390 Endura?
S-3 is right, when I search for K390 there are similar modified knives at KP. Higher priced due to the dye job and hardware mods.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001