River's Edge PM2

Discuss Spyderco's products and history.
User avatar
Albatross
Member
Posts: 857
Joined: Sat Feb 09, 2019 4:13 pm

Re: River's Edge PM2

Postby Albatross » Wed Aug 19, 2020 10:46 pm

Looks like I'm out this round then. That's a bummer.
sal wrote:
Fri Nov 09, 2018 3:01 pm

...But in general, I'm all about high performance, Ergos, safety. That's why I've been accused of "deigning in the dark"...

sal

User avatar
steelcity16
Member
Posts: 4231
Joined: Mon Dec 11, 2017 11:34 am

Re: River's Edge PM2

Postby steelcity16 » Wed Aug 19, 2020 10:59 pm

I got my order in 2:42 PM, and from what I remember they were available for sale until 2:56 PM. That's a LOT of people who are going to be bummed. They said we will be first in line for the next batch, but I wonder if the next batch will even be large enough given how long they were available for sale while actually being sold out? :eek:
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
VooDooChild
Member
Posts: 1124
Joined: Wed Feb 21, 2018 1:29 am

Re: River's Edge PM2

Postby VooDooChild » Wed Aug 19, 2020 11:11 pm

So will I get an email telling me I have been refunded?
Or am I going to have to call to verify?
sal wrote:
Thu May 28, 2020 8:14 pm
... "The edge is a ghost"...

SLOSpyder
Member
Posts: 115
Joined: Fri May 31, 2019 12:20 pm

Re: River's Edge PM2

Postby SLOSpyder » Wed Aug 19, 2020 11:16 pm

Great. Got my order in early.. I thought. No shipping confirmation. 😒

User avatar
steelcity16
Member
Posts: 4231
Joined: Mon Dec 11, 2017 11:34 am

Re: River's Edge PM2

Postby steelcity16 » Wed Aug 19, 2020 11:24 pm

SLOSpyder wrote:
Wed Aug 19, 2020 11:16 pm
Great. Got my order in early.. I thought. No shipping confirmation. 😒

The only ones who got their orders in early enough were probably the bots. These are about to be $1000 on eBay. :rolleyes:
:spyder: CRU-CARTA THEM ALL! :spyder:

SLOSpyder
Member
Posts: 115
Joined: Fri May 31, 2019 12:20 pm

Re: River's Edge PM2

Postby SLOSpyder » Wed Aug 19, 2020 11:26 pm

steelcity16 wrote:
Wed Aug 19, 2020 11:24 pm
SLOSpyder wrote:
Wed Aug 19, 2020 11:16 pm
Great. Got my order in early.. I thought. No shipping confirmation. 😒

The only ones who got their orders in early enough were probably the bots. These are about to be $1000 on eBay. :rolleyes:
I guess so. I doubt I’m gonna just as luckily be staring at my phone next time.

User avatar
steelcity16
Member
Posts: 4231
Joined: Mon Dec 11, 2017 11:34 am

Re: River's Edge PM2

Postby steelcity16 » Wed Aug 19, 2020 11:29 pm

SLOSpyder wrote:
Wed Aug 19, 2020 11:26 pm
steelcity16 wrote:
Wed Aug 19, 2020 11:24 pm
SLOSpyder wrote:
Wed Aug 19, 2020 11:16 pm
Great. Got my order in early.. I thought. No shipping confirmation. 😒

The only ones who got their orders in early enough were probably the bots. These are about to be $1000 on eBay. :rolleyes:
I guess so. I doubt I’m gonna just as luckily be staring at my phone next time.

It sounds like they will likely contact all of the cancels to see if they want to fulfill their order once their new batch comes in. And then post the new batch to the website once everyone who got their order cancelled has been fulfilled. I hope that is the case.
:spyder: CRU-CARTA THEM ALL! :spyder:

SLOSpyder
Member
Posts: 115
Joined: Fri May 31, 2019 12:20 pm

Re: River's Edge PM2

Postby SLOSpyder » Wed Aug 19, 2020 11:34 pm

Ok. I hope that is how they do it.

User avatar
steelcity16
Member
Posts: 4231
Joined: Mon Dec 11, 2017 11:34 am

Re: River's Edge PM2

Postby steelcity16 » Wed Aug 19, 2020 11:58 pm

SLOSpyder wrote:
Wed Aug 19, 2020 11:34 pm
Ok. I hope that is how they do it.

Me too. I'm a little surprised it took them a day and a half to figure out they sold more than they had? :confused:
:spyder: CRU-CARTA THEM ALL! :spyder:

RandomNick
Member
Posts: 6
Joined: Sat Mar 28, 2020 8:43 pm

Re: River's Edge PM2

Postby RandomNick » Thu Aug 20, 2020 3:50 am

steelcity16 wrote:
Wed Aug 19, 2020 11:24 pm
SLOSpyder wrote:
Wed Aug 19, 2020 11:16 pm
Great. Got my order in early.. I thought. No shipping confirmation. 😒

The only ones who got their orders in early enough were probably the bots. These are about to be $1000 on eBay. :rolleyes:
Not all of them went to bots. I happened to see the email right after it landed in my inbox and got my order in quickly enough. Sometimes it's just pure dumb luck, not a bot.

blueblur
Member
Posts: 335
Joined: Wed May 10, 2017 3:09 pm
Location: The Keystone State

Re: River's Edge PM2

Postby blueblur » Thu Aug 20, 2020 4:14 am

Wow, what a let down. I hope they have a reliable system to ensure those whose orders are getting canceled really will be getting one. I don’t have the time or patience to look for a random in stock notification again or constantly refreshing a page. Let’s hope they get this worked out.

ladybug93
Member
Posts: 1722
Joined: Tue May 15, 2018 11:20 pm

Re: River's Edge PM2

Postby ladybug93 » Thu Aug 20, 2020 5:32 am

i think it's really cool that companies will go out on a limb to provide us with cool combinations that spyderco can't make production, but it's so unfortunate how ugly an experience it always turns out to be.

BornIn1500
Member
Posts: 501
Joined: Tue May 08, 2018 10:04 pm

Re: River's Edge PM2

Postby BornIn1500 » Thu Aug 20, 2020 5:33 am

steelcity16 wrote:
Wed Aug 19, 2020 10:59 pm
That's a LOT of people who are going to be bummed. They said we will be first in line for the next batch, but I wonder if the next batch will even be large enough given how long they were available for sale while actually being sold out? :eek:
Yea I think it's likely that there won't even be a second "drop" for their next batch. They might all be going to fill these cancellations.

User avatar
Dazen
Member
Posts: 766
Joined: Thu Jun 20, 2019 6:38 am
Location: Texas U.S.A. Earth

Re: River's Edge PM2

Postby Dazen » Thu Aug 20, 2020 5:57 am

Well, no shipping email for me either. We’ll see how the next one goes.

User avatar
Sharp Guy
Member
Posts: 5970
Joined: Tue Jan 26, 2016 2:19 pm
Location: Over here!

Re: River's Edge PM2

Postby Sharp Guy » Thu Aug 20, 2020 7:21 am

Well this explains why they were available for much longer than expected. Easy come easy go. Stuff happens. Not going to get upset about it. It's a neat knife only because of the FDE coating. It's still just a PM2. If I'm able to get one when they have more available I'll be happy. If I'm not able to get one for some reason I'll still be happy. Life's too short to get bummed out over not getting another PM2
Of all the things I've lost I miss my mind the most!

User avatar
steelcity16
Member
Posts: 4231
Joined: Mon Dec 11, 2017 11:34 am

Re: River's Edge PM2

Postby steelcity16 » Thu Aug 20, 2020 7:36 am

Sharp Guy wrote:
Thu Aug 20, 2020 7:21 am
Well this explains why they were available for much longer than expected. Easy come easy go. Stuff happens. Not going to get upset about it. It's a neat knife only because of the FDE coating. It's still just a PM2. If I'm able to get one when they have more available I'll be happy. If I'm not able to get one for some reason I'll still be happy. Life's too short to get bummed out over not getting another PM2

Its funny how the fine folks on this forum are like "bummer", "life goes on", "easy come easy go", when on Facebook and IG there's about to be a bunch of profanity laced tirades from the entitlement generation who didn't get their shiny object and the flipper scum who are mad they had to cancel their eBay listings that they were about to make $200+ on. :rolleyes:
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
TkoK83Spy
Member
Posts: 5077
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: River's Edge PM2

Postby TkoK83Spy » Thu Aug 20, 2020 7:41 am

Sharp Guy wrote:
Thu Aug 20, 2020 7:21 am
Well this explains why they were available for much longer than expected. Easy come easy go. Stuff happens. Not going to get upset about it. It's a neat knife only because of the FDE coating. It's still just a PM2. If I'm able to get one when they have more available I'll be happy. If I'm not able to get one for some reason I'll still be happy. Life's too short to get bummed out over not getting another PM2
Smart man, plus you still have the original great OD Green/DLC (also a favorite of mine as well) That has to take the sting out of it a bit! Though, I would probably be a little upset had I received order confirmation just to have it be taken away. But like you said...it's still just another PM2
20 :spyder:'s in 11 different steels
2 - ZT's - 0460 and 0470
1 - Microtech Ultratech DE OTF
1 - Civivi Elementum

-Rick

User avatar
steelcity16
Member
Posts: 4231
Joined: Mon Dec 11, 2017 11:34 am

Re: River's Edge PM2

Postby steelcity16 » Thu Aug 20, 2020 7:47 am

TkoK83Spy wrote:
Thu Aug 20, 2020 7:41 am
Sharp Guy wrote:
Thu Aug 20, 2020 7:21 am
Well this explains why they were available for much longer than expected. Easy come easy go. Stuff happens. Not going to get upset about it. It's a neat knife only because of the FDE coating. It's still just a PM2. If I'm able to get one when they have more available I'll be happy. If I'm not able to get one for some reason I'll still be happy. Life's too short to get bummed out over not getting another PM2
Smart man, plus you still have the original great OD Green/DLC (also a favorite of mine as well) That has to take the sting out of it a bit! Though, I would probably be a little upset had I received order confirmation just to have it be taken away. But like you said...it's still just another PM2

Yeah, luckily it was "just another PM2" to most of us on here. It stinks if that was your grail knife though. I wanted it to check out the PVD coating, but I don't really care much about another PM2. The Cru-ple one from DLT was the first one I have had in probably 2 years. I carry the Seki FRN stuff these days. Now had this been a Cru-ple Endura, I would be a little heated.. :D
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
Albatross
Member
Posts: 857
Joined: Sat Feb 09, 2019 4:13 pm

Re: River's Edge PM2

Postby Albatross » Thu Aug 20, 2020 7:48 am

steelcity16 wrote:
Thu Aug 20, 2020 7:36 am
Sharp Guy wrote:
Thu Aug 20, 2020 7:21 am
Well this explains why they were available for much longer than expected. Easy come easy go. Stuff happens. Not going to get upset about it. It's a neat knife only because of the FDE coating. It's still just a PM2. If I'm able to get one when they have more available I'll be happy. If I'm not able to get one for some reason I'll still be happy. Life's too short to get bummed out over not getting another PM2

Its funny how the fine folks on this forum are like "bummer", "life goes on", "easy come easy go", when on Facebook and IG there's about to be a bunch of profanity laced tirades from the entitlement generation who didn't get their shiny object and the flipper scum who are mad they had to cancel their eBay listings that they were about to make $200+ on. :rolleyes:
I'd like to think we have a (mostly) mature and respectful group here, especially when compared to other parts of the internet. I wonder though, how much the shiny footprints policy influenced comments here.

I'm bummed, but only because I got excited about getting one so easily, before they sold out. I wouldn't care if I missed the drop, that's on me. Missing out, after believing I got one is frustrating, but I'm not frustrated with REC.

Prior to this, I was looking at the BBS M390 PM2 to fill a specific need. I might just go with that, instead of waiting for the REC PM2 to become available again. I'm bummed, but that's not what's driving my decision here.

Accidents happen. The only dealers I took issue with, as far as exclusives go, were TKJ (although it didn't affect me) and Knifejoy (which did affect me). I have respect for how REC handled the fallout and am not opposed to buying from them in the future.
sal wrote:
Fri Nov 09, 2018 3:01 pm

...But in general, I'm all about high performance, Ergos, safety. That's why I've been accused of "deigning in the dark"...

sal

User avatar
TkoK83Spy
Member
Posts: 5077
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: River's Edge PM2

Postby TkoK83Spy » Thu Aug 20, 2020 7:51 am

steelcity16 wrote:
Thu Aug 20, 2020 7:47 am
TkoK83Spy wrote:
Thu Aug 20, 2020 7:41 am
Sharp Guy wrote:
Thu Aug 20, 2020 7:21 am
Well this explains why they were available for much longer than expected. Easy come easy go. Stuff happens. Not going to get upset about it. It's a neat knife only because of the FDE coating. It's still just a PM2. If I'm able to get one when they have more available I'll be happy. If I'm not able to get one for some reason I'll still be happy. Life's too short to get bummed out over not getting another PM2
Smart man, plus you still have the original great OD Green/DLC (also a favorite of mine as well) That has to take the sting out of it a bit! Though, I would probably be a little upset had I received order confirmation just to have it be taken away. But like you said...it's still just another PM2

Yeah, luckily it was "just another PM2" to most of us on here. It stinks if that was your grail knife though. I wanted it to check out the PVD coating, but I don't really care much about another PM2. The Cru-ple one from DLT was the first one I have had in probably 2 years. I carry the Seki FRN stuff these days. Now had this been a Cru-ple Endura, I would be a little heated.. :D
Yea good point there, it definitely would be the grail PM2 for many people...BUT, there appears to be more opportunities in the future. After this cluster mess here though, I'm wondering how this will turn out. Amazing it wasn't even a scheduled drop that people knew of ahead of time and this still happened. I'm bummed that people here that would give some feedback on the coating ended up missing out after thinking they got one. So onto the next run...when and how many!?!
20 :spyder:'s in 11 different steels
2 - ZT's - 0460 and 0470
1 - Microtech Ultratech DE OTF
1 - Civivi Elementum

-Rick


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: ChrisinHove, GiftedMisfit, Majestic-12 [Bot], mtb2104, ruger95 and 47 guests