SHOT Show 2020 Videos and other info concerning new models
Re: SHOT Show 2020 Videos and other info concerning new models
https://youtu.be/OgkrsAsdGeE
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
- VooDooChild
- Member
- Posts: 2627
- Joined: Wed Feb 21, 2018 1:29 am
Re: SHOT Show 2020 Videos and other info concerning new models
Really liked hearing sal talk about spy27 and some of the history there. Also google the prices and edit them in. I was sitting there thinking is he really going to ask this question 20 times. At least he stopped after the first few.Spydergirl88 wrote: https://youtu.be/OgkrsAsdGeE
"Rome's greatest contribution to mathematics was the killing of Archimedes."
- ChrisinHove
- Member
- Posts: 4098
- Joined: Tue Dec 17, 2013 8:12 am
- Location: 27.2046° N, 77.4977° E
Re: SHOT Show 2020 Videos and other info concerning new models
Hahaha! Spot on, mate!Bloke wrote: ↑Wed Jan 22, 2020 4:56 pmI find the whole “scalper” thing and all the associated *****ing here an never ending source of amusement. :)
I reckon good luck to them! They’re not breaking any laws and we live in capitalist societies. The problem isn’t with the “scalpers”. They’re most likely average Joes trying to make a dollar. The problem lays with the kooks who have to have every new knife released, whether they need it or not, quite an unhealthy obsession, I reckon, and are prepared to pay the premium “scalpers” demand and then whine about it.
Quite bizarre! :confused:
Anyhow...
I’ve never liked tanto’s, but I really do like that PM2.
PS. I hope that Eric has made a full recovery. I’m embarrassed to admit that I did laugh at a Knife Corp CEO being as clumsy as the rest of us.
Re: SHOT Show 2020 Videos and other info concerning new models
This video has Phil Wilson in it I believeVooDooChild wrote: ↑Fri Jan 24, 2020 1:14 amReally liked hearing sal talk about spy27 and some of the history there. Also google the prices and edit them in. I was sitting there thinking is he really going to ask this question 20 times. At least he stopped after the first few.Spydergirl88 wrote: https://youtu.be/OgkrsAsdGeE
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
- VooDooChild
- Member
- Posts: 2627
- Joined: Wed Feb 21, 2018 1:29 am
Re: SHOT Show 2020 Videos and other info concerning new models
When a man starts talking about spy27 about half way through the video, we dont see who it is but the name Sal Glesser is edited into the bottom right part of the video.
"Rome's greatest contribution to mathematics was the killing of Archimedes."
Re: SHOT Show 2020 Videos and other info concerning new models
You're right my bad I can't readVooDooChild wrote: ↑Fri Jan 24, 2020 6:26 amWhen a man starts talking about spy27 about half way through the video, we dont see who it is but the name Sal Glesser is edited into the bottom right part of the video.
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
-
- Member
- Posts: 6949
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: SHOT Show 2020 Videos and other info concerning new models
You did notice he said "to use the tip to penetrate something" and the tip is not even close to that box, didn't you? Using the transition to slash is not the same as using the tip to penetrate. But who cares, anyway. You either like tantos or you don't. I carried one for years, used it for everything and beat the **** out of it. I still don't like 'em. And for the "stronger tip" crowd, I snapped a quarter inch off the tip thrusting straight into 3/8" drywall even though I had used the tip to pry out staples. Sometimes things happen.Liquid Cobra wrote: ↑Tue Jan 21, 2020 10:28 pmTkoK83Spy wrote: ↑Tue Jan 21, 2020 9:52 pmI think everyone's all juiced up on the tanto because it's something totally different from Spyderco. In actual use, it's not very useful. You really have to crank your wrist in uncomfortable way to utilize the tip to penetrate something , say cutting from above and pulling back. Just a different design. Amazing how easy it is to sucker some people in!
That second edge on a tanto works great for opening boxes. I find I don’t have to twist my wrist like you’re saying. You can see here with a tanto and the angle of my forearm:
Vs getting the very tip of say.. a leaf blade:
Of course, that’s an exaggerated image because you don’t really need to go at a box at such a steep angle to make your cut as seen here:
But the same goes for the tanto. Plus it looks good and you have a nice strong point for piercing as well as scraping:
I don’t know if you’ve ever owned a tanto but you might want to give it a try if you haven’t. For and EDC I’ll definitely take a more standard blade shape, but tantos have their uses.
- Liquid Cobra
- Member
- Posts: 6492
- Joined: Wed Jan 02, 2013 11:38 pm
- Location: British Columbia, CANADA
Re: SHOT Show 2020 Videos and other info concerning new models
Yes I know he said the tip. I’m demonstrating that you don’t need to. But if you want to it’s there. :rolleyes:
Most recently acquired: Military 2, Paramilitary 2 Tanto x2, YoJUMBO, Swayback, Siren, DLC Yojimbo 2, Native Chief, Shaman S90V, Para 3 LW, Ikuchi, UKPK, Smock, SUBVERT, Amalgam, Para 3 CTS-XHP, Kapara, Paramilitary 2 M390
Grail Paramilitary 2 M390 X 2! ACHIEVED!!
For more of my pictures see my Instagram account.
@liquid_cobra
Grail Paramilitary 2 M390 X 2! ACHIEVED!!
For more of my pictures see my Instagram account.
@liquid_cobra
Re: SHOT Show 2020 Videos and other info concerning new models
Not a word on the Military 2 prototype?
Re: SHOT Show 2020 Videos and other info concerning new models
I think they don´t show everything in such vids that actually could be seen if you actually attended the shows.
For example I read somewhere (not this forum) that there was a PM2 wharncliff prototype exhibited at the boot (of course I can´t confirm that) - no mention of that one either in any vid.
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: SHOT Show 2020 Videos and other info concerning new models
https://youtu.be/s4XqfPjzZxk
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: SHOT Show 2020 Videos and other info concerning new models
So, the only option is to wait for someone attended the show in person to post here...Wartstein wrote: ↑Fri Jan 24, 2020 2:01 pm
I think they don´t show everything in such vids that actually could be seen if you actually attended the shows.
For example I read somewhere (not this forum) that there was a PM2 wharncliff prototype exhibited at the boot (of course I can´t confirm that) - no mention of that one either in any vid.
Re: SHOT Show 2020 Videos and other info concerning new models
AlexRus wrote: ↑Fri Jan 24, 2020 2:03 pmSo, the only option is to wait for someone attended the show in person to post here...Wartstein wrote: ↑Fri Jan 24, 2020 2:01 pm
I think they don´t show everything in such vids that actually could be seen if you actually attended the shows.
For example I read somewhere (not this forum) that there was a PM2 wharncliff prototype exhibited at the boot (of course I can´t confirm that) - no mention of that one either in any vid.
Perhaps you could ask in this thread? viewtopic.php?t=85722#p1390336
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: SHOT Show 2020 Videos and other info concerning new models
https://youtu.be/XK-WSmYBAKE
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: SHOT Show 2020 Videos and other info concerning new models
https://youtu.be/j_lX0A6bSpw
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: SHOT Show 2020 Videos and other info concerning new models
Did you notice Eric's clothes were coordinated with the Siren? Couldn't tell the two apart!
CG
So many knives - so little funds!!!
Re: SHOT Show 2020 Videos and other info concerning new models
Lol
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: SHOT Show 2020 Videos and other info concerning new models
Thanks for posting the vids!!! Still interested in what else was being introduced at Shot Show so end up spending a couple hours on youtube anyways, but this certainly simplifies the Spyderco portion of the searching.
Excited to see the 828 U 20 has finally made it to market... it has been a five year wait. Now to get my hands on one to see if it is everything I've thought it would be.... wish I could go to that show someday!
Back to Spyderco ... I've never been attracted to the Yojimbo but was enthralled with the fully blacked out version; need to get my hands on one and check it out!!! Think the Yojimbo fans have got to be going nuts. I'm so naive i even had to look up the name to find its meaning.
CG
So many knives - so little funds!!!
Re: SHOT Show 2020 Videos and other info concerning new models
I'll bet E-Man gets tired of saying the same things over and over for different retailers' vids.
- best wishes, Jazz.
- Coffeetron
- Member
- Posts: 65
- Joined: Wed Sep 18, 2019 2:56 pm
- Location: Austria
Re: SHOT Show 2020 Videos and other info concerning new models
Excited about the upcoming Siren release. I believe to have heard that the black/blue handle color combo will be the first among others to come. Might as well show some extra patience. Yellow, Orange/Black would be even nicer color combos.
A SE version would be interesting as well. Hope it sells well...
A SE version would be interesting as well. Hope it sells well...