Spyderco Catcherman?

Discuss Spyderco's products and history.
outdoorman vojto
Member
Posts: 8
Joined: Fri Dec 15, 2017 4:15 am

Re: Spyderco Catcherman?

Postby outdoorman vojto » Mon Jan 14, 2019 9:29 am

Total number.
Attachments
P1030281.JPG.jpg

outdoorman vojto
Member
Posts: 8
Joined: Fri Dec 15, 2017 4:15 am

Re: Spyderco Catcherman?

Postby outdoorman vojto » Mon Jan 14, 2019 9:44 am

Total number 2 foto.
Attachments
P1030284.JPG.jpg

500Nitro
Member
Posts: 703
Joined: Wed Jan 17, 2018 10:56 am
Location: Australia

Re: Spyderco Catcherman?

Postby 500Nitro » Mon Jan 14, 2019 12:03 pm

Awesome photos. Nice to see them lined up together, a good reference.

Well done for getting them all. I've just started and got 2, soon to be 3 lol
3 x Endura 1 SE, 1 x Endura ? CE and a Black Pacific Salt. Want Aqua Salt, Fish Hunter and a Pacific Salt Yellow.

AccountDeletedUserRequest
Member
Posts: 6612
Joined: Mon Oct 29, 2007 8:15 am

Re: Spyderco Catcherman?

Postby AccountDeletedUserRequest » Thu Jan 17, 2019 7:56 pm

I'm probably going to sign up to ebay just to hunt one of these down. No luck on the forums.

outdoorman vojto
Member
Posts: 8
Joined: Fri Dec 15, 2017 4:15 am

Re: Spyderco Catcherman?

Postby outdoorman vojto » Tue May 07, 2019 10:56 am

11 Catchermans / 1 CatcherMAT (from Czech republic - Europe).
Attachments
11.jpg

Tdog
Member
Posts: 1846
Joined: Sat Apr 30, 2011 7:04 pm
Location: The woods of Florida

Re: Spyderco Catcherman?

Postby Tdog » Tue May 07, 2019 5:56 pm

I would buy PE or combo edge...or both. LC please.

User avatar
steelcity16
Member
Posts: 3378
Joined: Mon Dec 11, 2017 11:34 am

Re: Spyderco Catcherman?

Postby steelcity16 » Tue May 07, 2019 7:09 pm

Tdog wrote:
Tue May 07, 2019 5:56 pm
I would buy PE or combo edge...or both. LC please.

Ill buy LC200N PE and H1 PE and SE. DLC blades and hardware with neon glow in the dark FRN. I'll take one of each.
:spyder: CRU-CARTA THEM ALL! :spyder:

AccountDeletedUserRequest
Member
Posts: 6612
Joined: Mon Oct 29, 2007 8:15 am

Re: Spyderco Catcherman?

Postby AccountDeletedUserRequest » Tue May 07, 2019 7:26 pm

Still haven't had any luck finding one...

JD Spydo
Member
Posts: 17794
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Spyderco Catcherman?

Postby JD Spydo » Wed May 08, 2019 11:03 am

With all the current fanfare and hoopla about blade steel LC200N I truly believe it's high time for another CATCHERMAN in that blade steel>> But!!!?? But!!!???? it has to be available in PE, CE & SE all three because there are a lot of us who like all three variations of the CATCHERMAN.

User avatar
steelcity16
Member
Posts: 3378
Joined: Mon Dec 11, 2017 11:34 am

Re: Spyderco Catcherman?

Postby steelcity16 » Thu Jun 06, 2019 10:17 am

JD Spydo wrote:
Wed May 08, 2019 11:03 am
With all the current fanfare and hoopla about blade steel LC200N I truly believe it's high time for another CATCHERMAN in that blade steel>> But!!!?? But!!!???? it has to be available in PE, CE & SE all three because there are a lot of us who like all three variations of the CATCHERMAN.

I agree on all points JD!! I would buy one of each edge type. Another model that while maybe a slower seller, should be a fixture in Spydercos lineup alongside SE and PE LC200N Spyderhawks. The unique, specialized, and useful models like these are what sets Spyderco apart from other companies.
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
xceptnl
Member
Posts: 8353
Joined: Mon Feb 21, 2011 7:48 pm
Location: Tobacco Country, Virginia
Contact:

Re: Spyderco Catcherman?

Postby xceptnl » Thu Jun 06, 2019 1:26 pm

outdoorman vojto wrote:
Mon Jan 14, 2019 9:27 am
All 6 versions.
Only one was FFG correct?
Image
sal wrote: .... even today, we design a knife from the edge out!
*Landon*

User avatar
Enactive
Member
Posts: 886
Joined: Thu Dec 20, 2018 8:19 pm
Location: Wet side of Washington

Re: Spyderco Catcherman?

Postby Enactive » Thu Jun 06, 2019 1:33 pm

Would be very hard to pass on an LC200N Salt variant if it were FFG and green/ satin or stonewashed finish.

User avatar
NoFair
Member
Posts: 2039
Joined: Mon Jul 24, 2006 3:23 pm
Location: Norway

Re: Spyderco Catcherman?

Postby NoFair » Thu Jun 06, 2019 10:40 pm

xceptnl wrote:
Thu Jun 06, 2019 1:26 pm
outdoorman vojto wrote:
Mon Jan 14, 2019 9:27 am
All 6 versions.
Only one was FFG correct?
MBS-26 and CE afaik. Wish they had done full PE too, but happy with my CE one.

User avatar
steelcity16
Member
Posts: 3378
Joined: Mon Dec 11, 2017 11:34 am

Re: Spyderco Catcherman?

Postby steelcity16 » Thu Jun 06, 2019 11:58 pm

Vivi wrote:
Tue May 07, 2019 7:26 pm

Still haven't had any luck finding one...

There was an H1 USN Sprint that went for $375 a few weeks ago! :eek:

We really need this one back. LC200N is just the ticket for renewing interest in Catcherman and the Spyderhawk!
:spyder: CRU-CARTA THEM ALL! :spyder:

JD Spydo
Member
Posts: 17794
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Spyderco Catcherman?

Postby JD Spydo » Sun Jun 09, 2019 6:20 am

xceptnl wrote:
Wed Jan 10, 2018 7:43 am
JD Spydo wrote:
NoFair wrote:
JD Spydo wrote:
Even the older AUS-8, full Spyderedged Catcherman that I've had for years is a super great food prep knife and for the life of me I can't figure why they didn't offer the Catcherman in full SE in those other blade steels is just beyond my thinking :confused: :confused:

I can't tell you how many non-knife people I've worked with that have tried to buy my AUS-8, full SE CATCHERMAN. It's just a great, functional, multi-purpose knife.
Imho the CE is much better for fish and meat.
OH I know what you're saying "No Fair" but have you ever tried one of the older AUS-8, full Spyderedged units before? Because there is just something really special about that model in SE I can assure you that you would love it.

Oh I like my two MBS-26 and two H-1 CE Catcherman models but there is something very special about that old AUS-8 SE CAtcherman.

This is a truth if I have ever read one. I let the USN version go, but once I used the SE version once, I knew it was a model I couldn't let go of.
Another thing we need to make these guys aware of Landon is that the serration pattern on the older AUS-8 full Spyderedged unit is a lower profile and somewhat more rounded pattern and it is truly the best serration pattern I've seen Spyderco ever come up with. If they do cave in a give us an LC200N in full SE then I do hope they copy the original SE pattern from the older AUS-8 model.

The concept of a folding fillet knife was a winner from the get-go. So please Spyderco don't let this great old model go by the way of the dinosaur.

User avatar
cyberfish2
Member
Posts: 3
Joined: Sun May 19, 2019 8:17 am
Location: N. Calif.

Re: Spyderco Catcherman?

Postby cyberfish2 » Fri Jun 21, 2019 8:36 pm

How much might I get for my 30+ year old Spyderco Catcherman? It was expensive when I bought it - about $95.00. I'm 80 now, so I don't use it much anymore. It is still razor sharp. It was my backpack knife for many years, so it has a black "3 oz" mark which I put on the back edge, which may be permanent. It has a yellow handle, an AUS-8A marked blade, and Siki-City, Japan on the backside. No box, or paperwork. I don't see an easy way to post a picture.
Every day is a gift.


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: AHarbuck, Ebsyesque, GarageBoy, Jewell, Monty, MSN [Bot], Mzen, Ric, The Meat man and 37 guests