Show us your lanyards!
-
dj moonbat
- Member
- Posts: 1513
- Joined: Sat Mar 27, 2010 11:58 am
- Location: Sunny SoCal
Re: Show us your lanyards!
I just put a simple lanyard on my Dfly, which I made with much lighter weight paracord than most of those ITT. (I had it left over from making nylon sheathing for a braided headphone cord.)
I'd like to put a bead on there, but all the lanyard beads I've found seem to be made for 550 or maybe slightly lighter. Does anybody have suggestions for finding cool beads with a smaller interior diameter?
I'd like to put a bead on there, but all the lanyard beads I've found seem to be made for 550 or maybe slightly lighter. Does anybody have suggestions for finding cool beads with a smaller interior diameter?
-
xceptnl
- Member
- Posts: 9000
- Joined: Mon Feb 21, 2011 6:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: Show us your lanyards!
https://www.schmuckatellico.comdj moonbat wrote:I just put a simple lanyard on my Dfly, which I made with much lighter weight paracord than most of those ITT. (I had it left over from making nylon sheathing for a braided headphone cord.)
I'd like to put a bead on there, but all the lanyard beads I've found seem to be made for 550 or maybe slightly lighter. Does anybody have suggestions for finding cool beads with a smaller interior diameter?
Makes a smaller diameter beads. See the picture below on my Dragonfly with some tiny cordage.
*Landon*sal wrote: .... even today, we design a knife from the edge out!
Re: Show us your lanyards!
Can't decide which of my knives I will put this on. :)
"No matter where you go, there you are"
-
Stormdrane
- Member
- Posts: 426
- Joined: Tue Mar 01, 2005 1:20 pm
- Location: Georgia, USA
- Contact:
Re: Show us your lanyards!
EDC pocket dump with the Delica and a wrist lanyard with a trio of True Lover's knots...
-
Stormdrane
- Member
- Posts: 426
- Joined: Tue Mar 01, 2005 1:20 pm
- Location: Georgia, USA
- Contact:
Re: Show us your lanyards!
Button hole loop with diamond knot button on my PM2. Aids in retrieval from pocket.
- Attachments
-
- Button hole with diamond knot button
-
Stormdrane
- Member
- Posts: 426
- Joined: Tue Mar 01, 2005 1:20 pm
- Location: Georgia, USA
- Contact:
Re: Show us your lanyards!
Theater masks. Comedy and tragedy. The pylon is bronze, the masks on it's sides are silver.
- 20785533_21713.jpg (11.58 KiB) Viewed 4031 times
- Attachments
-
- 20785508_21495.jpg (11.59 KiB) Viewed 4031 times
-
- 20785385_20949.jpg (10.46 KiB) Viewed 4031 times
-
- 20785533_21734.jpg (15.12 KiB) Viewed 4031 times
-
kodai78
- Member
- Posts: 421
- Joined: Fri Apr 06, 2018 9:14 pm
- Location: “Beam me up Scotty, there’s no intelligent life down here.”
Re: Show us your lanyards!
:spyder: Shaman REX 45, Smock, Baby Jess Horn CE, Spydiechef, Schempp Bowie,Ti Fluted Military, Titanium Military, Native S30 V and G10, PM 2 in S35VN, and S110V, Manix 2 LW BD1 and SPY 27, Sage 5, Positron black CPM S30V, Chaparral w/Raffir Noble scales, SuperLeaf VG 10, Ladybug H1, Dragonfly 2 in ZDP 189 and Superblue/420J1 and H1, Delica in ZDP 189, Clipitool Standard, the Cook’s knife VG10, Santoku, paring and utility knives, all in MBS 26. :spyder:
-
BIGSTRETCH
- Member
- Posts: 207
- Joined: Sat Dec 30, 2017 10:04 pm
Re: Show us your lanyards!
Cool scales on the Delica! What are those?Stormdrane wrote: ↑Fri Feb 16, 2018 12:02 amEDC pocket dump with the Delica and a wrist lanyard with a trio of True Lover's knots...
-
Stormdrane
- Member
- Posts: 426
- Joined: Tue Mar 01, 2005 1:20 pm
- Location: Georgia, USA
- Contact:
Re: Show us your lanyards!
Cool scales on the Delica! What are those?
That's just the stainless scales model of the Delica from years ago. They're showing scratches/pocket wear.
Re: Show us your lanyards!
One I made for a co-worker
-
Stormdrane
- Member
- Posts: 426
- Joined: Tue Mar 01, 2005 1:20 pm
- Location: Georgia, USA
- Contact:
Re: Show us your lanyards!
squarehead lw
Last edited by ladybug93 on Mon Dec 27, 2021 5:16 pm, edited 1 time in total.
keep your knife sharp and your focus sharper.
current collection:
C191GP, C36GMCBK2, C11ZFRDBBK, C267BK, C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
M398, H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
current collection:
C191GP, C36GMCBK2, C11ZFRDBBK, C267BK, C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
M398, H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
-
SpyderGrill
- Member
- Posts: 603
- Joined: Wed Feb 26, 2020 7:44 pm
- Location: SW Florida
Re: Show us your lanyards!
A couple I made awhile back. .40 and .223 cal casings. The .223 may be better for a keychain but still kind of cool.
Re: Show us your lanyards!
i made one like that too! i liked it, but took it off because i found i don't really like lanyards on users. shh... don't tell anyone it's not on a spyderco. this was from four years ago.SpyderGrill wrote: ↑Fri Aug 07, 2020 8:57 pmA couple I made awhile back. .40 and .223 cal casings. The .223 may be better for a keychain but still kind of cool.
keep your knife sharp and your focus sharper.
current collection:
C191GP, C36GMCBK2, C11ZFRDBBK, C267BK, C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
M398, H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
current collection:
C191GP, C36GMCBK2, C11ZFRDBBK, C267BK, C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
M398, H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
-
SpyderGrill
- Member
- Posts: 603
- Joined: Wed Feb 26, 2020 7:44 pm
- Location: SW Florida
Re: Show us your lanyards!
Zancudo, I have a brown one, great knife, it flies out with authority even with my broken thumb "the knuckle is twice as big as normal" . Some knives I cant open fast with my thumb. I also have his big brother Avispa, its the same, flies right open.