Uh oh nutnfancy spreading misinformation...

Discuss Spyderco's products and history.
User avatar
araneae
Member
Posts: 5506
Joined: Wed Aug 09, 2006 10:10 pm
Location: A lil more south of the Erie shore, Ohio

Re: Uh oh nutnfancy spreading misinformation...

#121

Post by araneae »

Speaking of things I find irrelevant; there is a reason Mr B. has been on my ignore list for some time now.
So many knives, so few pockets... :)
-Nick

Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
User avatar
jabba359
Member
Posts: 4963
Joined: Fri Feb 10, 2006 10:07 pm
Location: Van Nuys, CA U.S.A. Earth
Contact:

Re: Uh oh nutnfancy spreading misinformation...

#122

Post by jabba359 »

Bodog wrote:I don't have the time or inclination to quote the immature attacks from this thread or the apostlep thread or any other thread where someone lists concerns in a way that isn't pleasing or that isn't surrounded by gushing praise.
I didn't ask you to find those. I asked you to explain a single post you quoted and the reply you provided to that quote. That way I can better understand what I was not seeing in that post.
-Kyle

:bug-red
Latest arrivals: Lava Flow CF DLC Para2, Magnacut Mule, GITD Jester

http://www.spydiewiki.com
Bodog
Member
Posts: 1752
Joined: Sat Oct 18, 2014 10:03 am
Location: Tierra del Sol, USA Earth

Re: Uh oh nutnfancy spreading misinformation...

#123

Post by Bodog »

palonej wrote:Don't bother Jabba. You'll just be called a troll because you disagree with that nonsense.
He is slowly, but surely, wearing out his welcome here.......as he has done elsewhere, and been booted.
Joe

PS......he just can't help himself. Sad really.

You're no different. And yeah, you're a solid troll on the other site without a doubt. It just so happens a lot of those mods are the same way so you fit in. The same goes for a good handful of others. Here you tone it down a bit but whatever. Internet drama.
They who dance are thought mad by those who do not hear the music.
User avatar
wrdwrght
Member
Posts: 5264
Joined: Tue Mar 01, 2011 8:35 am

Re: Uh oh nutnfancy spreading misinformation...

#124

Post by wrdwrght »

Oh, somebody. Make it stop.
-Marc (pocketing my JD Smith sprint today)

“Science is not the truth. Science is finding the truth. When science changes its opinion, it didn’t lie to you. It learned more.” - Brené Brown
User avatar
PayneTrain
Member
Posts: 1556
Joined: Sun Mar 02, 2014 11:30 am
Location: CT

Re: Uh oh nutnfancy spreading misinformation...

#125

Post by PayneTrain »

You know what this calls for?
Image
:D Eat it, sign. Is it weird that I took a picture of my dog pooping if it's funny?
"Be the person your dog thinks you are."
User avatar
Bloke
Member
Posts: 5425
Joined: Fri May 13, 2016 12:43 am
Location: Sydney, Australia.

Re: Uh oh nutnfancy spreading misinformation...

#126

Post by Bloke »

How embarrassing!

Nutnfancy must be rolling around the floor laughing his arse off! :eek:
A day without laughter is a day wasted. ~ Charlie Chaplin
User avatar
chuck_roxas45
Member
Posts: 8797
Joined: Wed Mar 03, 2010 4:43 pm
Location: Small City, Philippines

Re: Uh oh nutnfancy spreading misinformation...

#127

Post by chuck_roxas45 »

There's always that guy who tries to ride in on a white horse...
Bodog
Member
Posts: 1752
Joined: Sat Oct 18, 2014 10:03 am
Location: Tierra del Sol, USA Earth

Re: Uh oh nutnfancy spreading misinformation...

#128

Post by Bodog »

chuck_roxas45 wrote:There's always that guy who tries to ride in on a white horse...

Or, you know, stop immature attacks made by people behind the anonymity of a computer screen. But if being a decent person is bad and saying things you wouldn't say to someone's face is right, then I guess I don't want to be right.

And if you want to say Sal is bad because he is a knight riding a white horse asking people (And posting it at the top of his forum for everyone to read and remember) to not lay a lot of negative opinions about others, on at least this forum, then thats what you think. I cant stop that.

Civilized discussion about our hobby is one thing. Trying to tear down another person over freaking pocket knives is another. Dont be daft.
They who dance are thought mad by those who do not hear the music.
craytab
Member
Posts: 21
Joined: Fri Mar 17, 2017 2:46 pm

Re: Uh oh nutnfancy spreading misinformation...

#129

Post by craytab »

Bodog wrote:
palonej wrote:Don't bother Jabba. You'll just be called a troll because you disagree with that nonsense.
He is slowly, but surely, wearing out his welcome here.......as he has done elsewhere, and been booted.
Joe

PS......he just can't help himself. Sad really.

You're no different. And yeah, you're a solid troll on the other site without a doubt. It just so happens a lot of those mods are the same way so you fit in. The same goes for a good handful of others. Here you tone it down a bit but whatever. Internet drama.
Interesting.
User avatar
chuck_roxas45
Member
Posts: 8797
Joined: Wed Mar 03, 2010 4:43 pm
Location: Small City, Philippines

Re: Uh oh nutnfancy spreading misinformation...

#130

Post by chuck_roxas45 »

Bodog wrote:
chuck_roxas45 wrote:There's always that guy who tries to ride in on a white horse...

Or, you know, stop immature attacks made by people behind the anonymity of a computer screen. But if being a decent person is bad and saying things you wouldn't say to someone's face is right, then I guess I don't want to be right.

And if you want to say Sal is bad because he is a knight riding a white horse asking people (And posting it at the top of his forum for everyone to read and remember) to not lay a lot of negative opinions about others, on at least this forum, then thats what you think. I cant stop that.

Civilized discussion about our hobby is one thing. Trying to tear down another person over freaking pocket knives is another. Dont be daft.
Sal IS a knight on a white horse. You're just trying to be one. :rolleyes:

And behaving worse than the what you purportedly want to stop. :p
Last edited by chuck_roxas45 on Fri May 05, 2017 8:29 pm, edited 1 time in total.
User avatar
PayneTrain
Member
Posts: 1556
Joined: Sun Mar 02, 2014 11:30 am
Location: CT

Re: Uh oh nutnfancy spreading misinformation...

#131

Post by PayneTrain »

chuck_roxas45 wrote:There's always that guy who tries to ride in on a white horse...
I don't get it. The context suggests it's supposed to be a bad thing, but that sounds like a very good thing to me. I think I'd like a white horse. In fact, I worked with one tonight! Though he was maybe more of a fleabitten grey. I also disagree with the connotation associated with the high horse. I'm a tall guy, I need a tall horse! I can't help it!
"Be the person your dog thinks you are."
User avatar
chuck_roxas45
Member
Posts: 8797
Joined: Wed Mar 03, 2010 4:43 pm
Location: Small City, Philippines

Re: Uh oh nutnfancy spreading misinformation...

#132

Post by chuck_roxas45 »

PayneTrain wrote:
chuck_roxas45 wrote:There's always that guy who tries to ride in on a white horse...
I don't get it. The context suggests it's supposed to be a bad thing, but that sounds like a very good thing to me. I think I'd like a white horse. In fact, I worked with one tonight! Though he was maybe more of a fleabitten grey. I also disagree with the connotation associated with the high horse. I'm a tall guy, I need a tall horse! I can't help it!
On second thought, I really used to like White Horse Whisky... :D
User avatar
PayneTrain
Member
Posts: 1556
Joined: Sun Mar 02, 2014 11:30 am
Location: CT

Re: Uh oh nutnfancy spreading misinformation...

#133

Post by PayneTrain »

That too sounds very very good! Oxford or whoever needs to get to work reexamining these phrases. Language is so weird.
"Be the person your dog thinks you are."
User avatar
Evil D
Member
Posts: 28493
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: Uh oh nutnfancy spreading misinformation...

#134

Post by Evil D »

Pestilence rode a white horse (sometimes referred to as pale). Not everyone​ riding a while horse has good intentions ;)
~David
User avatar
Ankerson
Member
Posts: 7613
Joined: Sat Jul 24, 2010 1:23 pm
Location: Raleigh, NC

Re: Uh oh nutnfancy spreading misinformation...

#135

Post by Ankerson »

Been watching this thread...

Attacking one another and or talking about one another isn't really going to solve anything here. All that's going to do this thread is keep the downward spiral going and get even more people upset.

I have no skin in this game one way or the other.

But it would be nice to see you'll get a long and move past this thread. :cool:
User avatar
FCM415
Member
Posts: 1791
Joined: Wed Jan 30, 2013 1:18 am

Re: Uh oh nutnfancy spreading misinformation...

#136

Post by FCM415 »

If people don't like Nutnfancy and want to say so, they have the right to do so in this forum unless Spyderco says they don't.

I think many can see the irony when someone attacks their character FOR attacking someone else's character, and even less... saying negative things about someone or something.... Even worse...THIS SAME GUY thinks negative opinions are reserved for him and people who thinks like him. He'll defend his "right" to criticize and be negative but call you a POS if you cross HIS line.

It's always been ok to voice your opinion about a public figure. Don't let a guy who allows himself to say negative things about YOU change anything. It's a free country.
User avatar
chuck_roxas45
Member
Posts: 8797
Joined: Wed Mar 03, 2010 4:43 pm
Location: Small City, Philippines

Re: Uh oh nutnfancy spreading misinformation...

#137

Post by chuck_roxas45 »

Well, I'm sure nutn isn't the least bit bothered about what we can say about him here.
ThePeacent
Member
Posts: 2847
Joined: Sat Jun 11, 2016 12:45 am
Location: Barcelona, Spain

Re: Uh oh nutnfancy spreading misinformation...

#138

Post by ThePeacent »

FWIW, some comments on Nutn's video regarding H1 rust-resistance properties:

"Sorry buddy, but H1 does not rust. You're getting rust from the etching on the blade or some form of cross contamination."

"Great vid, Nutn! Just FYI, the "rust spots" on the H1 pacific salt are probably mineral(iron) deposits from the water. The crevices collect minerals in the water, and that is what appears to be like rust on the H1. If you brush it off, it should fall right off. At least, that's been my experience. Stay safe in your adventures!!!"

"Sorry Nutn, but H1 cannot and will not rust. What your seeing is some other material that has transferred onto the knife. Sometimes this is residue left over from the manufacturing process, or from something you may have cut. At any rate, wipe and down and you will find that the "rust" will go away. Also, yes the clip is titanium."
ThePeacent
Member
Posts: 2847
Joined: Sat Jun 11, 2016 12:45 am
Location: Barcelona, Spain

Re: Uh oh nutnfancy spreading misinformation...

#139

Post by ThePeacent »

It seems he sticks to his guns...(sentence at 13:45)

https://youtu.be/kZT2qOMjf0g
User avatar
roger-roger
Member
Posts: 306
Joined: Wed May 18, 2016 10:07 am

Re: Uh oh nutnfancy spreading misinformation...

#140

Post by roger-roger »

ThePeacent wrote:It seems he sticks to his guns...(sentence at 13:45)

https://youtu.be/kZT2qOMjf0g

A summary would be great. I'm done clicking those links.
Post Reply