Micarta Shaman 2nd Sprint Run

Discuss Spyderco's products and history.
BigGrove
Member
Posts: 347
Joined: Fri Jul 06, 2018 12:25 pm

Micarta Shaman 2nd Sprint Run

Postby BigGrove » Thu Nov 07, 2019 9:04 am

With Sal announcing a second sprint run is in the works I thought new thread dedicated to this version would be appropriate. Since it will be the same brown micarta I would like Maxamet if it's the same stonewash finish the PM2 and P3 versions have. I love that finish.

Sumdumguy
Member
Posts: 1477
Joined: Sun Dec 03, 2017 3:51 pm

Re: Micarta Shaman 2nd Sprint Run

Postby Sumdumguy » Thu Nov 07, 2019 9:05 am

I'm guessing it will be PD#1

cycleguy
Member
Posts: 582
Joined: Tue Aug 28, 2018 4:46 pm
Location: Arvada, coloRADo

Re: Micarta Shaman 2nd Sprint Run

Postby cycleguy » Thu Nov 07, 2019 9:15 am

Sumdumguy wrote:
Thu Nov 07, 2019 9:05 am
I'm guessing it will be PD#1
Seems to make sense. This way it is the same (for those who wanted one but didn't get one) without it being the same (for those that got one and enjoy having something not so common). Also, probably enough of the same thing to where those that got one won't be interested in duplicating ... unless they are collecting everything or wanting another to use while the first stays in the collection.

CG
So many knives - so little funds!!!

The Meat man
Member
Posts: 2839
Joined: Wed Jan 03, 2018 8:01 pm
Location: Missouri, USA

Re: Micarta Shaman 2nd Sprint Run

Postby The Meat man » Thu Nov 07, 2019 9:39 am

I'm really hoping for CPM 4V.
- Connor

Jesus said, "I am the way, the truth, and the life: no man cometh unto the Father, but by me." (John 14:6)

joeldworkin307
Member
Posts: 91
Joined: Wed Dec 31, 2014 11:58 am

Re: Micarta Shaman 2nd Sprint Run

Postby joeldworkin307 » Thu Nov 07, 2019 9:47 am

They have been favoring k390 lately...

Leader2light
Member
Posts: 31
Joined: Thu Oct 24, 2019 11:24 am

Re: Micarta Shaman 2nd Sprint Run

Postby Leader2light » Thu Nov 07, 2019 9:50 am

I don't care about steel, but want a shiny blade just like the run that was so successful. You can already buy stonewashed or DLC blades by default.

User avatar
thewoodpecker
Member
Posts: 359
Joined: Thu Jan 19, 2017 1:58 pm

Re: Micarta Shaman 2nd Sprint Run

Postby thewoodpecker » Thu Nov 07, 2019 9:52 am

PD#1 makes sense but K390 or 4V/Vanadis4E would be interesting. I hope they go stonewashed instead of satin on this one though.
Spyderco Caly 3.5 Super Blue User

User avatar
steelcity16
Member
Posts: 3238
Joined: Mon Dec 11, 2017 11:34 am

Re: Micarta Shaman 2nd Sprint Run

Postby steelcity16 » Thu Nov 07, 2019 9:53 am

The Meat man wrote:
Thu Nov 07, 2019 9:39 am

I'm really hoping for CPM 4V.

I would like a Denim 4V Shaman, but I am guessing the Denim one will be K390. Guessing PD-1 on this next brown run. 4V might end up with burgundy micarta, and REALLY hoping for 3V with black micarta. Black is kind of boring in G10/FRN, but unbuffed matte black micarta looks fantastic.

I've seen a few people ask for stonewash as well, but I really like the satin on my Cru-carta Shaman and vote to stick with that! :D A concurrent run of DLC variants would be welcome with any of the above combinations though!
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
sal
Member
Posts: 12325
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: Micarta Shaman 2nd Sprint Run

Postby sal » Thu Nov 07, 2019 10:18 am

We've not yet purchased the material and we've not chosen a steel so this isn't going to happen immediately.

sal

731chopper
Member
Posts: 2
Joined: Tue Nov 05, 2019 3:32 pm

Re: Micarta Shaman 2nd Sprint Run

Postby 731chopper » Thu Nov 07, 2019 10:26 am

sal wrote:
Thu Nov 07, 2019 10:18 am
We've not yet purchased the material and we've not chosen a steel so this is going to happen immediately.

sal
Regardless, thank you for doing another run.

chacho
Member
Posts: 3
Joined: Mon Oct 10, 2016 1:38 pm

Re: Micarta Shaman 2nd Sprint Run

Postby chacho » Thu Nov 07, 2019 10:29 am

Cant wait regardless of steel!

User avatar
Dazen
Member
Posts: 233
Joined: Thu Jun 20, 2019 6:38 am
Location: Texas U.S.A. Earth

Re: Micarta Shaman 2nd Sprint Run

Postby Dazen » Thu Nov 07, 2019 11:39 am

sal wrote:
Thu Nov 07, 2019 10:18 am
We've not yet purchased the material and we've not chosen a steel so this is going to happen immediately.

sal
To compliment the original I would either do Cruwear and a different color micarta, or brown micarta and PD1. That would make the original special yet still give everyone else a shot at very similar knife.

User avatar
blues
Member
Posts: 355
Joined: Sun Sep 02, 2018 11:49 am
Location: Blue Ridge Mtns

Re: Micarta Shaman 2nd Sprint Run

Postby blues » Thu Nov 07, 2019 11:40 am

sal wrote:
Thu Nov 07, 2019 10:18 am
We've not yet purchased the material and we've not chosen a steel so this is going to happen immediately.

sal
I'm guessing Sal meant to type "isn't".

Whatever it "is", I'm sure it will be well received.

User avatar
steelcity16
Member
Posts: 3238
Joined: Mon Dec 11, 2017 11:34 am

Re: Micarta Shaman 2nd Sprint Run

Postby steelcity16 » Thu Nov 07, 2019 11:52 am

Dazen wrote:
Thu Nov 07, 2019 11:39 am
sal wrote:
Thu Nov 07, 2019 10:18 am
We've not yet purchased the material and we've not chosen a steel so this is going to happen immediately.

sal
To compliment the original I would either do Cruwear and a different color micarta, or brown micarta and PD1. That would make the original special yet still give everyone else a shot at very similar knife.

I feel like both are going to happen. Sal mentioned in a few threads that they were going to do OD Green with Cruwear and Denim with a TBD steel (4V or K390 are my guesses). So this new bombshell about another run of brown in a "complimentary" steel leads me to believe this will be PD-1 with brown micarta, since PD-1 is Carpenter's version of Crucible's CPM-Cruwear. Sounds to me like we will see all three of these.
:spyder: CRU-CARTA THEM ALL! :spyder:

blueblur
Member
Posts: 227
Joined: Wed May 10, 2017 3:09 pm
Location: The Keystone State

Re: Micarta Shaman 2nd Sprint Run

Postby blueblur » Thu Nov 07, 2019 12:35 pm

I hope they still do something with Cruwear. Choosing a different steel isn’t completely solving the issue.

User avatar
Pelagic
Member
Posts: 2438
Joined: Fri Apr 27, 2018 5:49 pm
Location: East Coast/Nomadic

Re: Micarta Shaman 2nd Sprint Run

Postby Pelagic » Thu Nov 07, 2019 2:19 pm

The Meat man wrote:
Thu Nov 07, 2019 9:39 am
I'm really hoping for CPM 4V.
Yeah, you'd think they could di a re-run of a model that sold out in like 50 seconds, Haha.
Pancake wrote:
Wed Aug 14, 2019 10:20 pm
Are you a magician? :eek:
Nate wrote:
Thu Apr 04, 2019 4:32 pm
You're the lone wolf of truth howling into the winds of ignorance
Doeswhateveraspidercan wrote:
Sat Jun 15, 2019 9:17 pm
You are a nobody got it?

User avatar
Dazen
Member
Posts: 233
Joined: Thu Jun 20, 2019 6:38 am
Location: Texas U.S.A. Earth

Re: Micarta Shaman 2nd Sprint Run

Postby Dazen » Thu Nov 07, 2019 2:22 pm

I hope everyone who wants a Cruwear Shaman gets one, if they do another run I will buy one just to be able to sell it to someone on here at cost. The only Shaman I’m in the market to keep is a one with burgundy micarta, don’t really even care what steel.

User avatar
Larry_Mott
Member
Posts: 1898
Joined: Tue Jul 14, 2015 5:00 am
Location: Helsingborg, Sweden

Re: Micarta Shaman 2nd Sprint Run

Postby Larry_Mott » Thu Nov 07, 2019 2:24 pm

Pelagic wrote:
Thu Nov 07, 2019 2:19 pm
The Meat man wrote:
Thu Nov 07, 2019 9:39 am
I'm really hoping for CPM 4V.
Yeah, you'd think they could di a re-run of a model that sold out in like 50 seconds, Haha.
I guess you're referring to a specific dealer since the originalt thread has gone on for weeks, and i see them on a daily basis (just not from US dealers) also pictures pop up daily from end users who just got one, but what do i know. It'd be interesting to know if 1200 were/has been made and distributed or if it was a small/er run this time.
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott R.I.P.

User avatar
Larry_Mott
Member
Posts: 1898
Joined: Tue Jul 14, 2015 5:00 am
Location: Helsingborg, Sweden

Re: Micarta Shaman 2nd Sprint Run

Postby Larry_Mott » Thu Nov 07, 2019 2:26 pm

Dazen wrote:
Thu Nov 07, 2019 2:22 pm
I hope everyone who wants a Cruwear Shaman gets one, if they do another run I will buy one just to be able to sell it to someone on here at cost. The only Shaman I’m in the market to keep is a one with burgundy micarta, don’t really even care what steel.
I think i'd bite the bullet and get the scales i want made for one, since steel is less important to you (and i agree)
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott R.I.P.

User avatar
Dazen
Member
Posts: 233
Joined: Thu Jun 20, 2019 6:38 am
Location: Texas U.S.A. Earth

Re: Micarta Shaman 2nd Sprint Run

Postby Dazen » Thu Nov 07, 2019 2:32 pm

Larry_Mott wrote:
Thu Nov 07, 2019 2:26 pm
Dazen wrote:
Thu Nov 07, 2019 2:22 pm
I hope everyone who wants a Cruwear Shaman gets one, if they do another run I will buy one just to be able to sell it to someone on here at cost. The only Shaman I’m in the market to keep is a one with burgundy micarta, don’t really even care what steel.
I think i'd bite the bullet and get the scales i want made for one, since steel is less important to you (and i agree)

I would but I’m a sucker for factory fit and finish, and I’ve yet to see any aftermarket compare. Also, I do really care what steel, but I know whatever steel Spyderco pairs with burgundy micarta would be awesome!


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Albatross, Bing [Bot], Fright_Fox, Google [Bot], Majestic-12 [Bot] and 26 guests