Spyderco "niche" and/or hardly known knives
Spyderco "niche" and/or hardly known knives
... Meant to be just a fun little thread:
From time to time I still stumble across Spyderco knives I´ve never seen or heard of before.
Mostly those are "niche" knives, as in "very specialized designs, which will never be first choices for generall edc", but perhaps instead very good for specific tasks.
Just today this happened to me with the ROC (https://www.spyderco.com/catalog/details/C177G/938 pic below taken from the Spyderco homepage)
As said, not a design optimized for general edc at all, but very cool looking and perhaps quite good for example at cutting ("cleaving") stuff on a cutting board for a knife this size
Any "niche-", hardly known, or just lately discovered by you Spydercos you´d like to share?
From time to time I still stumble across Spyderco knives I´ve never seen or heard of before.
Mostly those are "niche" knives, as in "very specialized designs, which will never be first choices for generall edc", but perhaps instead very good for specific tasks.
Just today this happened to me with the ROC (https://www.spyderco.com/catalog/details/C177G/938 pic below taken from the Spyderco homepage)
As said, not a design optimized for general edc at all, but very cool looking and perhaps quite good for example at cutting ("cleaving") stuff on a cutting board for a knife this size
Any "niche-", hardly known, or just lately discovered by you Spydercos you´d like to share?
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Spyderco "niche" and/or hardly known knives
One of my all time favourite knives ever made by any company. The Spyderco Ulize, it is a cutting beast - 4.12 inch blade, and the ergos, while you might not necessarily think so from looking at it, are absolutely amazing! I think allot of people would fall in love instantly if they had the the opportunity to hold it for a tic...
https://www.spyderco.com/catalog/detail ... roduct=777
https://www.spyderco.com/catalog/detail ... roduct=777
- VooDooChild
- Member
- Posts: 2625
- Joined: Wed Feb 21, 2018 1:29 am
Re: Spyderco "niche" and/or hardly known knives
You dont religiously look through the catalog every year like I do? The roc has been around for a few years.
No, I get what you are saying. I dont think there are many current models that most people on here dont know about. Although there are plenty of older models I dont know about.
I think the most niche knives are stuff like the snapit salt and dogtag folder/squarehead.
No, I get what you are saying. I dont think there are many current models that most people on here dont know about. Although there are plenty of older models I dont know about.
I think the most niche knives are stuff like the snapit salt and dogtag folder/squarehead.
"Rome's greatest contribution to mathematics was the killing of Archimedes."
Re: Spyderco "niche" and/or hardly known knives
The ARK was designed for stabbin' fools in the shower.
That's pretty "niche", right?
That's pretty "niche", right?
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Spyderco "niche" and/or hardly known knives
Yeah, but maybe just cause fools don't shower a lot... :p
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Spyderco "niche" and/or hardly known knives
Apparently they do in the military. Gotta protect that booty!
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Spyderco "niche" and/or hardly known knives
Thought you were kidding at first... looked up the ARK just now and learned about the serious background of the knife (honestly had no idea what it was specifically designed for)
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Spyderco "niche" and/or hardly known knives
It's a strange world we live in!Wartstein wrote: ↑Sun Jan 12, 2020 8:34 am
Thought you were kidding at first... looked up the ARK just now and learned about the serious background of the knife (honestly had no idea what it was specifically designed for)
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
- spoonrobot
- Member
- Posts: 855
- Joined: Sat Jun 23, 2007 10:37 am
- Location: Rome, Georgia USA
Re: Spyderco "niche" and/or hardly known knives
The Khukri is one that seems to have been dropped from collective knowledge pretty quickly. Part of the cursed foliage green group of models from the late 2000s, I think there were several "issues" that memory-holed the knife. As mentioned the handle color was a big one but price was as well, people also seemed to really dislike the plunge line aesthetic. It's a shame because the knife is one of the best small blade - big cutting ability models I've ever used. Sized like a delica but cut better than an endura.
https://www.spyderco.com/catalog/detail ... roduct=368
https://www.spyderco.com/catalog/detail ... roduct=368
Re: Spyderco "niche" and/or hardly known knives
spoonrobot wrote: ↑Sun Jan 12, 2020 8:44 amThe Khukri is one that seems to have been dropped from collective knowledge pretty quickly....
I think I'd particullary like the negative blade angle on this one for many tasks...
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- kennethsime
- Member
- Posts: 4787
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: Spyderco "niche" and/or hardly known knives
I love the Foliage Green of the Khukri, but can't get down with the blade design. The whole Ed Schemp Native Series was a big deal when I was first following Spyderco. While some of the designs are timeless, I can't say I miss this one. I'm happy with Spyderco's shift from offering so many crazy blade design collaborations towards offering more in-house designed knives. Sal & Eric are the best knife designers around in my book!
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
-
- Member
- Posts: 6937
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: Spyderco "niche" and/or hardly known knives
If it's "niche" you want, look up the Maddox. It doesn't get more niche than that, with the possible exception of the Whale Rescue blade.
Re: Spyderco "niche" and/or hardly known knives
yablanowitz wrote: ↑Sun Jan 12, 2020 10:45 amIf it's "niche" you want, look up the Maddox. It doesn't get more niche than that, with the possible exception of the Whale Rescue blade.
Did look it up (this thread is getting more and more interesting) - you´re right, REALLY "niche", but probably a great design for those who need it ("those with limited physical movement" (quote from the Spyderco page))
https://www.spyderco.com/catalog/details.php?product=50
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Spyderco "niche" and/or hardly known knives
VooDooChild wrote: ↑Sun Jan 12, 2020 7:37 amYou dont religiously look through the catalog every year like I do? The roc has been around for a few years.
No, I get what you are saying. I dont think there are many current models that most people on here dont know about. Although there are plenty of older models I dont know about.
....
Actually I do look through the catalog from time to time, but probably not "religiously", but more "casually"
And my memory is not the best, so I most likely forget rather soon again about some models of which I know I´´ll never buy them anyway...
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- Larry_Mott
- Member
- Posts: 2590
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: Spyderco "niche" and/or hardly known knives
I'd say the Gunting, Massad Ayoob, P'Kal, Civilian, Matriarch and JaniSong qualify as niche models.
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
-
- Member
- Posts: 734
- Joined: Mon Feb 04, 2019 7:57 pm
Re: Spyderco "niche" and/or hardly known knives
I exist for nothing more, sir.Notsurewhy wrote: ↑Sun Jan 12, 2020 12:19 pmI knew That about the ARK, but your phrasing made me hear that line in Mr T's voice in my head. I legitimately laughed out loud. Well done.
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Spyderco "niche" and/or hardly known knives
One of my favorite Spydercos that gets little attention is the Warrior. The Al Mar Warrior and Rekat Hobbit are some of my favorite designs.
I recently by chance discovered the Kumo. Probably was common knowledge to many but I had never heard of it. I've been collecting custom RJ Martin fixed blades for two decades so I'm going to add one of these to the collection in 2020.
I recently by chance discovered the Kumo. Probably was common knowledge to many but I had never heard of it. I've been collecting custom RJ Martin fixed blades for two decades so I'm going to add one of these to the collection in 2020.
- Larry_Mott
- Member
- Posts: 2590
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: Spyderco "niche" and/or hardly known knives
The Kumo is a cool knife in all it's (relative) simplicity! I'm glad i got oneMonty wrote: ↑Sun Jan 12, 2020 3:32 pmOne of my favorite Spydercos that gets little attention is the Warrior. The Al Mar Warrior and Rekat Hobbit are some of my favorite designs.
I recently by chance discovered the Kumo. Probably was common knowledge to many but I had never heard of it. I've been collecting custom RJ Martin fixed blades for two decades so I'm going to add one of these to the collection in 2020.
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.