So what did you cut with spyderco today?

Discuss Spyderco's products and history.
Post Reply
User avatar
CODE4
Member
Posts: 2
Joined: Wed Feb 08, 2012 5:20 pm
Location: Tampa, FL
Contact:
Contact CODE4

#281

Post by CODE4 »

Received my Military and Endura yesterday (back from sharpening) and my Cruwear MULE today! Ordered some Halpern Scales as well to compliment the knife.

The tool steel look & feel is definitely interesting to have in a knife. I am eager to find out how well it holds it edge.
Top
User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

#282

Post by jackknifeh »

Pneumothorax wrote:NOTHING!!!!!!!!!!!! Im nekked! Over in Germany and dont carry when Im traveling. Tough reaching into my pocket to fondle the Spydie that is NOT there!
So what DO you play with?

I cut some carpet and started a thread in off topic about it. Once again, I learned something from guys on this forum by posting here. :D

Jack
Top
User avatar
computernut
Member
Posts: 232
Joined: Sat May 14, 2011 12:20 pm
Location: Canada

#283

Post by computernut »

The other day I was at a pizza joint and my wife and I ordered a couple of toasted sandwiches but they were a bit big to eat in one piece so I pulled out my Caly3 and sliced them in half. My wife asked if I was going to post his on the internet and I said of course ;)
Top
User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

#284

Post by jackknifeh »

computernut wrote:The other day I was at a pizza joint and my wife and I ordered a couple of toasted sandwiches but they were a bit big to eat in one piece so I pulled out my Caly3 and sliced them in half. My wife asked if I was going to post his on the internet and I said of course ;)
Evidently she recognizes an incurable mental disorder when she sees one. :) Does your wife shake her head and laugh like mine does? :o


Jack
Top
User avatar
Evil D
Member
Posts: 28358
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

#285

Post by Evil D »

I cut some silicone air tube for a bubble stick to put in my aquarium, a few coupons, loads of corrugated at work, that's about it.
~David
Top
rg02
Member
Posts: 862
Joined: Fri Dec 09, 2011 9:52 am
Location: Colorado

#286

Post by rg02 »

I used my Millie XHP to cut turkey ham and jalapeños to make breakfast burritos for the rest of the week. After that I used it again to cut tomatoes, jalapeños, and lettuce for beef and bean tacos for dinner. Only photo I took:
Image
-Ryan

-Techno, cruwear Mule, Dragonfly 2 FRN, Assist, Endura FRN ATS-55 SE, Endura SS aus-6 PE, Persistence(Wife's)
-Wicked Edge
Top
User avatar
Rwb1500
Member
Posts: 1140
Joined: Fri Jun 24, 2011 11:44 pm
Location: Pennsylvania

#287

Post by Rwb1500 »

^^^^^^^^How does one enjoy turkey ham? Is that like a club sandwich? ;)



I used a UKPK at work today to cut plastic shrink wrap (the stretchy kind), as well as heat shrink plastic wrap, paper, cardboard... I think that's all.

I got home and used a G10 Delica to open this;

Image


It's pink! Aaahhhhhhhh!
Top
Sonny
Member
Posts: 233
Joined: Wed Jul 01, 2009 7:48 pm

#288

Post by Sonny »

I cut the plastic tight-wrap off of an 8-pack of Pepsi, and only destroyed one bottle of pop.
Sonny
Top
CAMAROMAN
Member
Posts: 75
Joined: Thu Dec 29, 2011 4:13 pm
Location: KY

#289

Post by CAMAROMAN »

:eek: Myself.... (see thread I started)
:spyder: Laci Szabo, Military (digital camo), Navaja,Centofante 3 , Persian 2,Lum Chinese, Ladybug ZDP, Tasman Salt, Native,Viele, Spin, Persistance, Dragonfly, Manix 2, Pingo, Impala, T-mag

"A knifeless man is a lifeless man" - old Nordic proverb
Top
rg02
Member
Posts: 862
Joined: Fri Dec 09, 2011 9:52 am
Location: Colorado

#290

Post by rg02 »

Rwb1500 wrote:^^^^^^^^How does one enjoy turkey ham? Is that like a club sandwich? ;)
I sliced up the turkey ham and jalapeños and added scrambled eggs, hashbrowns, and cheese to make breakfast burritos :D
-Ryan

-Techno, cruwear Mule, Dragonfly 2 FRN, Assist, Endura FRN ATS-55 SE, Endura SS aus-6 PE, Persistence(Wife's)
-Wicked Edge
Top
Andreas
Member
Posts: 49
Joined: Fri Oct 28, 2011 8:05 am
Location: Netherlands

#291

Post by Andreas »

What I cut today? I cut some loose ends of the bottom of my trousers that were hanging loose, just after I finished cleaning my blade with some spirit. Unfortunately and foolishly enough I thought I wouldn't make that open bottle of spirit fall over. I did. I panicked a bit because my floor is wood so I ran to get towels. I cut myself appearantly while standing up . :o
Image
Image
Wishlist: Delica G10. Cricket SE/PE. Cat. Air
Top
User avatar
Evil D
Member
Posts: 28358
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

#292

Post by Evil D »

Today...nothing. Not a single thing. I had to train some people at work so i wasn't able to whip out the big guns and i had to stick to my trusty old razor box knife :(
~David
Top
Ghost
Member
Posts: 37
Joined: Tue Mar 13, 2012 7:41 pm
Location: Sweden

#293

Post by Ghost »

Used my Ladybug to cut open a padded envelope. Inside it was a box containing my Native :p . I think I'll use my Native to open my next envelope containing a Spyderco, then that will be used to open the next, and so on :) :p .
Top
Sithus1966
Member
Posts: 802
Joined: Thu Apr 01, 2010 9:49 pm
Location: Michigan

#294

Post by Sithus1966 »

Boxes, lots and lots of boxes. I was depackaging consumer commodities today. Open the case, open a box and take out the product, eye dropper and instructions & recycle. One skid down, six more to go........Endura ZDP-189.

Also used a Elmax Mule to open the package to my new Spyderweb Spin. :)
C05, C05S, C10SRD, C10SBK(x2), C10FPBR, C10GRE, C10FPGR, C11, C11FPBK, C12SBK2, C14 C17 C21, C28BK, C28BK2, C28YL2, C36, C45, C54GPBN, C77, C80GPOR, C81, C81GS, C81GBK2, C85GP2, C86, C86P, C86PET, C90, C94, C95, C106, C109, C116, C122, C123CF, C123, C123GBL, C126(x2), C132GP, C135GP, C136, C137, C138, C140, C142, C146CFP, C148, C158TIP, C161GP, C162, C163PBK, C164GPBN, LBK, LBKII(x2), LYL3HB, LGRE3, MBK, FB20, FB23, FB24SBK, FB31SBK, FBPBK, MT12, MT13, MT16, Woodcraft.
Top
Ghost
Member
Posts: 37
Joined: Tue Mar 13, 2012 7:41 pm
Location: Sweden

#295

Post by Ghost »

Andreas wrote:What I cut today?
So, which knife is that?
Top
User avatar
xceptnl
Member
Posts: 9000
Joined: Mon Feb 21, 2011 6:48 pm
Location: Tobacco Country, Virginia
Contact:
Contact xceptnl

#296

Post by xceptnl »

Ghost wrote:So, which knife is that?
It looks to be the Dragonfly 2 G-10 (FFG VG-10). Great EDC
Image
sal wrote: .... even today, we design a knife from the edge out!
*Landon*
Top
User avatar
thog94
Member
Posts: 182
Joined: Sat Oct 29, 2011 11:59 pm
Location: Bedford, NH

#297

Post by thog94 »

I build fishing nets for a living, well it's a majority of my job. We are constantly using serrated Vickies and a couple of other knives that we classify as disposable. I decided to buy a Dragonfly Salt 2 and have been using at the shop and out at sea ever since. Cuts poly twine like a charm. Other than that I trimmed a few pieces off my sons nerf gun today with my Native.
Top
User avatar
Azwaiian
Member
Posts: 663
Joined: Fri Aug 19, 2011 8:08 pm
Location: arizona

#298

Post by Azwaiian »

I used my SE Ladybug to cut open a Recess Peanut Butter Egg, mmmmm, so **** yummy!
Top
Chiles
Member
Posts: 21
Joined: Thu Jan 19, 2012 8:07 pm
Location: Georgia

#299

Post by Chiles »

A model kit. Really exciting.
Top
spydutch
Member
Posts: 6278
Joined: Sun May 22, 2005 2:57 am
Location: Assen (Drenthe) the Netherlands

#300

Post by spydutch »

Yesterday I opened some packages and cut some string with my G10 Navigator/SE "experimental" in Gin1.
Arend(old school Spydie lover)

MEMBER OF THE INTERNATIONAL ORDER OF THE SPYDEREDGE!!!

VERY PROUD OWNER OF A CALY III/SE #043 :D

....AND A FG(PARA) MILITARY/SE IN CPMD2(thanx Sal):cool:

...I would love to have one in full SpyderEdge:p
Top
Post Reply

Return to “Spyderco General Discussion”