Chaparral 3

Discuss Spyderco's products and history.
Post Reply
User avatar
Holland
Member
Posts: 7576
Joined: Fri Jan 06, 2012 9:37 pm
Location: Alberta

#21

Post by Holland »

Donut wrote:Over the weekend I filled out the support form on the website requesting that they double check the price.

No response yet. I will keep everyone updated when I hear back.
Thanks Donut :D
-Spencer

Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Top
User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

#22

Post by jackknifeh »

I emailed knife center the other day about the price. This is their reply.

Hi Jack - Yes, that price is correct - this one features the "stepped titanium".

The Chaparral is a great knife. I won't be getting this one though. It's not the amount of money that bothers me. It's the fact the I DON'T HAVE the amount of money. :) If I were financially in the position to get one I would. I assume the price is justified based on the production cost to Spyderco. Based on my opinion of the people at the company I don't think they would make this knife for the same cost as the Chaparral 2, then sell it for twice the amount. I just don't see them doing that.

Jack
Top
User avatar
Donut
Member
Posts: 9614
Joined: Sat Sep 05, 2009 5:47 pm
Location: Virginia Beach, VA, USA

#23

Post by Donut »

Wow, crazy.
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
Top
User avatar
nirvanero
Member
Posts: 1042
Joined: Mon Aug 02, 2010 5:40 pm
Location: Spain

#24

Post by nirvanero »

jackknifeh wrote:I emailed knife center the other day about the price. This is their reply.

Hi Jack - Yes, that price is correct - this one features the "stepped titanium".

The Chaparral is a great knife. I won't be getting this one though. It's not the amount of money that bothers me. It's the fact the I DON'T HAVE the amount of money. :) If I were financially in the position to get one I would. I assume the price is justified based on the production cost to Spyderco. Based on my opinion of the people at the company I don't think they would make this knife for the same cost as the Chaparral 2, then sell it for twice the amount. I just don't see them doing that.

Jack
I guess this "stepped ti" finish is more expensive than "stealth ti" because they have to remove more of that expensive grey material. Millitary fluted titanium maybe had less titanium than the flat one but I'm sure it was more expensive to produce, so it's shocking the same knife with the same materials costs twice. Beautiful knife but I already own a Chaparral 2 and so far don't think about collecting this series.
Top
User avatar
gbelleh
Member
Posts: 4828
Joined: Wed Mar 17, 2010 10:16 pm
Location: Kansas

#25

Post by gbelleh »

Wow, if that really is correct, I won't be getting one either. That's just too high a price to justify when I already have the Chap 1 and 2. But that's fine, I have enough great knives to last me 1,000 years already!
:bug-red-white
Top
User avatar
CarbonFiberNut
Member
Posts: 410
Joined: Sat Mar 30, 2013 1:40 pm

#26

Post by CarbonFiberNut »

wow, lucky for me I can get a CF chaparral (a far superior handle material anyway) for less than a third of that...

:D
◊ Manix 2 XL ◊ Manix 2 lightweight blue ◊ Caly 3 carbon fiber ◊ Caly 3 damascus / CF ◊ Lum Chinese Nishijin ◊ Sage 1 ◊ Superleaf
◊ Dragonfly FRN serrated ◊ Endura Gen 1 ◊ Rescue Gen 1 ◊ Endura 4 FFG ◊ Delica 4 half serrated ◊ Mule Team ◊ Spin ◊ Bushcraft UK
◊ S110V Forum Native 5 ◊ Black Nishijin Cricket

[SIGPIC][/SIGPIC]

Top 5 most wanted: Domino, Dice, CF Para-2, CF Cricket. Seeing a theme here?
Top
User avatar
Donut
Member
Posts: 9614
Joined: Sat Sep 05, 2009 5:47 pm
Location: Virginia Beach, VA, USA

#27

Post by Donut »

My email response says that pricing is correct based on what they've been told they will receive them for. It is correct to the best of their knowledge.
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
Top
mattman
Member
Posts: 1443
Joined: Mon Sep 27, 2010 1:06 pm
Location: Central NY

#28

Post by mattman »

I still think it must be an error, somewhere...

I'm going to be patient, and cross my fingers, so I don't have to give up on the progression of this series...
Top
User avatar
donutsrule
Member
Posts: 435
Joined: Fri Sep 24, 2004 10:33 am
Location: San Diego

#29

Post by donutsrule »

Yikes. This kills the collection.

I liked the design better than the 2, but ... Yowch. Maybe if they'd released one of the spendy ones, first, but coming off the very reasonable price of the 1 these are much higher than I ever anticipated.
Top
dcoffe01
Member
Posts: 22
Joined: Wed Sep 26, 2012 4:54 pm
Location: Howell, Mi

#30

Post by dcoffe01 »

It may also be that the scrap rate is high. If the handle does not turn out, they have to throw it away.
Top
User avatar
donutsrule
Member
Posts: 435
Joined: Fri Sep 24, 2004 10:33 am
Location: San Diego

#31

Post by donutsrule »

dcoffe01 wrote:It may also be that the scrap rate is high. If the handle does not turn out, they have to throw it away.
Imagine the factory second sale!
Top
User avatar
gbelleh
Member
Posts: 4828
Joined: Wed Mar 17, 2010 10:16 pm
Location: Kansas

#32

Post by gbelleh »

I'm hoping Spyderco provided the wrong price, and the $564.95 retail should be $364.95 (which would seem more in line with the $319.95 retail price of the Chaparral 2). Maybe?
:bug-red-white
Top
User avatar
Holland
Member
Posts: 7576
Joined: Fri Jan 06, 2012 9:37 pm
Location: Alberta

#33

Post by Holland »

CarbonFiberNut wrote:wow, lucky for me I can get a CF chaparral (a far superior handle material anyway) for less than a third of that...

:D
lol :D
-Spencer

Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Top
mattman
Member
Posts: 1443
Joined: Mon Sep 27, 2010 1:06 pm
Location: Central NY

#34

Post by mattman »

gbelleh wrote:I'm hoping Spyderco provided the wrong price, and the $564.95 retail should be $364.95 (which would seem more in line with the $319.95 retail price of the Chaparral 2). Maybe?
This is where my thoughts were, as well.
I just didn't look up the Chap 2 retail to check my logic...

Thanks, gbelleh!
Top
User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

#35

Post by jackknifeh »

Has anyone or anyone you know put the knife on pre-order? I looked at it as close as I can on the pc and it really is intricatly engraved. It looks a lot more complicated than the Chaparral 2. That may make it necessary to ask the higher price but I don't know if it would justify paying for it. OTOH, I buy (and I'm sure there are others here :) ) what I want no matter what it is "worth". That word will mean different things to just about everyone. Of course you would have to "want" one that bad to begin with. I would love to have one and I would get one without question if I only had the money. Money is worth nothing by itself. I'd rather have "stuff".

Jack
Top
greenewk
Member
Posts: 77
Joined: Sun Dec 16, 2012 9:03 pm

#36

Post by greenewk »

Yeah, I can imagine that the intricate machining of all that Ti is pretty darn expensive, but even if they dropped the price $100 this one just isn't doing it for me... Really, I'm a little surprised that they're making it -- I'm assuming this will be produced in pretty limited quantities; justified or not, I just can't see too many of these moving.
Top
User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

#37

Post by jackknifeh »

I was surprised to see another titanium handle even if the pattern is different. The Chaparral series is designed to have different handle materials but I guess changing the pattern will be a choice also.

Has anyone heard what handle material (or pattern) will be on the Chaparral 4? :D :D :D Thought I'd be the first to ask. :D People were asking about the Sage5 a couple of months after the Sage4 was released but not BEFORE the release date. :)
Top
User avatar
Holland
Member
Posts: 7576
Joined: Fri Jan 06, 2012 9:37 pm
Location: Alberta

#38

Post by Holland »

jackknifeh wrote:I was surprised to see another titanium handle even if the pattern is different. The Chaparral series is designed to have different handle materials but I guess changing the pattern will be a choice also.

Has anyone heard what handle material (or pattern) will be on the Chaparral 4? :D :D :D Thought I'd be the first to ask. :D People were asking about the Sage5 a couple of months after the Sage4 was released but not BEFORE the release date. :)
no idea, but ill be ecstatic if its FRN :D
-Spencer

Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Top
User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

#39

Post by jackknifeh »

Come on everyone! The shipping is FREE!!! :)
Top
User avatar
senorsquare
Member
Posts: 1531
Joined: Fri Nov 02, 2012 8:34 am
Location: Lotta Rock, AR

#40

Post by senorsquare »

jackknifeh wrote:Has anyone heard what handle material (or pattern) will be on the Chaparral 4? :D :D :D Thought I'd be the first to ask. :D People were asking about the Sage5 a couple of months after the Sage4 was released but not BEFORE the release date. :)
There are a lot of options out there for future Chaps. Micarta, jigged bone, ironwood, G10, kirinite, FRN, FRCP, etc. It will be real interesting to see where they take it.
Top
Post Reply

Return to “Spyderco General Discussion”