If the liners are skeletonized, grinding into them (more like through them) could create a lot of wobble or flex in the scales, so watch for that.
If you press at 90 degrees from the pivot, is the problem still there? I have a lot of different styles of knives, on knives like the HEST folder, it seems like you have to press in a different direction to get it to open.
There are several knives that I own that don't make it 100% open on the first try, usually a small swing (maybe a few inches) while opening will get the blade where it needs to go. I don't consider it cheating if getting the knife open is critical like in a SD situation. I just have to pay attention to which ones need it and which ones don't.
Yo 2 opening technique vids?
-
chuck_roxas45
- Member
- Posts: 8797
- Joined: Wed Mar 03, 2010 4:43 pm
- Location: Small City, Philippines
Pressing straight towards the pivot seems to work best for me. It's the direction that will allow me the most skin contact with the hole.Donut wrote:If the liners are skeletonized, grinding into them (more like through them) could create a lot of wobble or flex in the scales, so watch for that.
If you press at 90 degrees from the pivot, is the problem still there? I have a lot of different styles of knives, on knives like the HEST folder, it seems like you have to press in a different direction to get it to open.
There are several knives that I own that don't make it 100% open on the first try, usually a small swing (maybe a few inches) while opening will get the blade where it needs to go. I don't consider it cheating if getting the knife open is critical like in a SD situation. I just have to pay attention to which ones need it and which ones don't.
Thanks for the tip about the liners.
http://uproxx.files.wordpress.com/2014/ ... ot-gif.gif" target="_blank
-
KardinalSyn
- Member
- Posts: 1394
- Joined: Mon Nov 28, 2011 8:39 pm
- Location: Colombo, Sri Lanka
Sorry for the late reply Chuck. Following this thread closely so that I am ready for when I get one. It's good to learn something new.chuck_roxas45 wrote:I probably wouldn't mind it if it were not an SD knife KS. I really like the Yo2 when it's open and that's why I'm sticking with trying to learn how to open reliably.
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.
Here is a quick iPad video I did of my Yojimbo 2 deployments. Its at leat as quick as the Paramilitary 2, perhaps quicker......[video=youtube;dmF2bKeInFg]http://www.youtube.com/watch?v=dmF2bKeInFg&feature=plcp[/video]
cevtv wrote:Mike designed it so that when carried tip-up, your thumb lands directly on the hole when you grab and draw it. There is nothing about this knife that wasn't thoroughly thought out. Every bit of the design was done for a reason. In my opinion, the Yojimbo 2 is the pinnacle of defensive folding
knife design.
Red is mine.