I've been buying them since MT-01 and haven't seen them released in multiple batches. However, the SFO uploads inventory to the web store manually in increments, so it's possible that more will show up online or that SFO could fill a phone order.redyps04 wrote:I'm wondering if that was only the first batch? Anyone that knows more about how the Mules are done can step in, though.
MT07P – Mule Team Fixed Blade featuring Damascus/VG-10
Watch the B/S/T forums at BF, and the big auction site. Some always show up.agent clark wrote:Is that it, then? Are they all gone? F***, F***, F***!!!!! I have at least one of every other MT model, and forgot to check in on Oct 1. If anyone has an extra for sale, or knows where to find one, please let me know. Dammit...
-
agent clark
- Member
- Posts: 71
- Joined: Fri Oct 31, 2008 7:25 pm
Welcome CLE, you know what the forum here is :)
I have 2 coming I believe on friday unless that UPS truck drives awful fast, and I ordered just a few minutes after they went on sale...lolol. Then again I'm close to the east coast. One is getting Halpern scales immediately and getting put to use. The type 4 earth brown scales with black screws are on the way. The other might get dressed up a little more and then put to use :D Plotting with scale maker in progress...lolol
A lot of enthusiasm for these damascened spyderco blades :D
Charlie
I have 2 coming I believe on friday unless that UPS truck drives awful fast, and I ordered just a few minutes after they went on sale...lolol. Then again I'm close to the east coast. One is getting Halpern scales immediately and getting put to use. The type 4 earth brown scales with black screws are on the way. The other might get dressed up a little more and then put to use :D Plotting with scale maker in progress...lolol
A lot of enthusiasm for these damascened spyderco blades :D
Charlie
Charlie
" Everything should be made as simple as possible, but not one bit simpler."
[CENTER]"Integrity is being good even if no one is watching"[/CENTER]
" Everything should be made as simple as possible, but not one bit simpler."
[CENTER]"Integrity is being good even if no one is watching"[/CENTER]
Nice presentation and handle choice! I'd love to see that with a sheath that had stainless rivets, just to make things "pop" (I can't believe I used that term).Marion David Poff wrote:Bam!
Like a Boss....
Marion
"It's like he channels dead crazy people!"-Brock Samson
Officially corrupted by Sequimite
Own:E4W E4W trainer, D4W, D4W trainer, Centofante 4, Swick II, FFG E4 w/ foliage green G-10,Mule Team 5 and 6
Want list: ZDP Stretch, Original and New Yojimbos, Perrin PPT
My wish-existed list: More MBC-esque blades.
Officially corrupted by Sequimite
Own:E4W E4W trainer, D4W, D4W trainer, Centofante 4, Swick II, FFG E4 w/ foliage green G-10,Mule Team 5 and 6
Want list: ZDP Stretch, Original and New Yojimbos, Perrin PPT
My wish-existed list: More MBC-esque blades.
-
SmoothOne25
- Member
- Posts: 2160
- Joined: Thu Oct 01, 2009 7:41 am
- Location: NJ
i was reading the paper... 7 mules made. why does my bd1 steel mule box say mt10p and yet this last one, dam/vg10, say mt7p? shouldnt it be 1 to 7 ? whats up with the label on mine?
ps. both had a similar design (the wavey rolls __like above^ )and were filthy and razor sharp! and had a huge box w/ free shipping for such a large box :D :p
ps. both had a similar design (the wavey rolls __like above^ )and were filthy and razor sharp! and had a huge box w/ free shipping for such a large box :D :p
The numbers are assigned at the start of each model that will go into production rather than waiting until it is in production. Number 10 went unusually quickly.
Our reason is quite satisfied, in 999 cases out of every 1000 of us, if we can find a few arguments that will do to recite in case our credulity is criticized by someone else. Our faith is faith in someone else's faith, and in the greatest matters this is most the case.
- William James, from The Will to Believe, a guest lecture at Yale University in 1897
- William James, from The Will to Believe, a guest lecture at Yale University in 1897
-
SmoothOne25
- Member
- Posts: 2160
- Joined: Thu Oct 01, 2009 7:41 am
- Location: NJ
-
SmoothOne25
- Member
- Posts: 2160
- Joined: Thu Oct 01, 2009 7:41 am
- Location: NJ
-
SmoothOne25
- Member
- Posts: 2160
- Joined: Thu Oct 01, 2009 7:41 am
- Location: NJ
It's the exact same issue we've seen with model numbers being skipped. Sometimes a model gets delayed and sometimes a model gets to production faster than expected.SmoothOne25 wrote:OK BUT WHY JUMP? :confused:
Our reason is quite satisfied, in 999 cases out of every 1000 of us, if we can find a few arguments that will do to recite in case our credulity is criticized by someone else. Our faith is faith in someone else's faith, and in the greatest matters this is most the case.
- William James, from The Will to Believe, a guest lecture at Yale University in 1897
- William James, from The Will to Believe, a guest lecture at Yale University in 1897
-
SeanH
- Member
- Posts: 366
- Joined: Wed May 31, 2006 5:17 pm
- Location: Northern Colorado, USA, Earth
- Contact:
just got off the phone with Halpern Titanium, Inc. I ordered a set of option 3 scales in black, they are out of the limited edition run.
Wile I was talking to them I asked if they had were going to make scales out of any other materials (like canvas micarta?) and they said that there was some talk of doing a run in carbon fiber but said that they would need to charge around $100 for it and weren't sure if anyone would buy them for that price. I told them that if they made them in CF, I would buy a set.
If any of you are interested in a fine set of CF scales and are willing to pay the price, give Halpern a call and let them know there is enough demand to make it worth their while.
(US) Phone: 888.283.8627
(Int'l) Phone: 413.283.8627
Wile I was talking to them I asked if they had were going to make scales out of any other materials (like canvas micarta?) and they said that there was some talk of doing a run in carbon fiber but said that they would need to charge around $100 for it and weren't sure if anyone would buy them for that price. I told them that if they made them in CF, I would buy a set.
If any of you are interested in a fine set of CF scales and are willing to pay the price, give Halpern a call and let them know there is enough demand to make it worth their while.
(US) Phone: 888.283.8627
(Int'l) Phone: 413.283.8627
>>The Spyderco Forum Cookbook ... and its thread<<
Think about what you believe, but don't believe everything you think.
"We feel that to "charge as much as the market will bear" is "to bite the hand that feeds you"."
Sal Glesser
Think about what you believe, but don't believe everything you think.
"We feel that to "charge as much as the market will bear" is "to bite the hand that feeds you"."
Sal Glesser