I gotta say Jr, I wish mine had came a bit sharper than it did, did yours come sharp?
Carothers
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Carothers
I just checked mine on some copier paper and it seems to have adequate edge sharpness, but nothing to brag about. I’ve read Nathan’s post on BF and I can understand his point. I’d rather the bevels be set accurately over simply having a screaming sharp edge out of the box. Hopefully, my DEK1 arrives soon and I can see what edge that one has. The DEK1 is not meant to hit a particular price point, so we’ll see if the edge gets more attention.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
-
- Member
- Posts: 12694
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Carothers
10-4. Thanx, JR.JRinFL wrote: ↑Sun Sep 05, 2021 8:06 pmI just checked mine on some copier paper and it seems to have adequate edge sharpness, but nothing to brag about. I’ve read Nathan’s post on BF and I can understand his point. I’d rather the bevels be set accurately over simply having a screaming sharp edge out of the box. Hopefully, my DEK1 arrives soon and I can see what edge that one has. The DEK1 is not meant to hit a particular price point, so we’ll see if the edge gets more attention.
Re: Carothers
It’s funny. Spyderco and CPK are connected for me. When I first sought after a “super steel” fixed blade I bought a Southfork. My performance wish was to be able to split a whole chicken, cut through the breast and rib bones and all, and still be able to shave hair after.
The Southfork did well but not like I hoped.
This prompted some good debate and discussion involving Cliff Stamp on here (RIP). And I think it’s what helped send me further on my search which led me to CPK.
The original Field Knife did the do and I was hooked! Now I know that’s not the only maker to put out a tough knife (geometry factors and all that), but I do love them. As close to perfection as I’ve ever experienced.
The Southfork did well but not like I hoped.
This prompted some good debate and discussion involving Cliff Stamp on here (RIP). And I think it’s what helped send me further on my search which led me to CPK.
The original Field Knife did the do and I was hooked! Now I know that’s not the only maker to put out a tough knife (geometry factors and all that), but I do love them. As close to perfection as I’ve ever experienced.
- Mark
"Don't believe everything you think." -anonymous wise man
"Don't believe everything you think." -anonymous wise man
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Carothers
My only wish is that they kept a couple of standard models in production so anyone can get a taste of D3V without jumping through hoops or joining a lolly scramble.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Carothers
Good stuff!mb1 wrote: ↑Mon Sep 06, 2021 6:29 amIt’s funny. Spyderco and CPK are connected for me. When I first sought after a “super steel” fixed blade I bought a Southfork. My performance wish was to be able to split a whole chicken, cut through the breast and rib bones and all, and still be able to shave hair after.
The Southfork did well but not like I hoped.
This prompted some good debate and discussion involving Cliff Stamp on here (RIP). And I think it’s what helped send me further on my search which led me to CPK.
The original Field Knife did the do and I was hooked! Now I know that’s not the only maker to put out a tough knife (geometry factors and all that), but I do love them. As close to perfection as I’ve ever experienced.
Josh
-
- Member
- Posts: 12694
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Carothers
I hear ya Mark! Loud & Clear brothermb1 wrote: ↑Mon Sep 06, 2021 6:29 amIt’s funny. Spyderco and CPK are connected for me. When I first sought after a “super steel” fixed blade I bought a Southfork. My performance wish was to be able to split a whole chicken, cut through the breast and rib bones and all, and still be able to shave hair after.
The Southfork did well but not like I hoped.
This prompted some good debate and discussion involving Cliff Stamp on here (RIP). And I think it’s what helped send me further on my search which led me to CPK.
The original Field Knife did the do and I was hooked! Now I know that’s not the only maker to put out a tough knife (geometry factors and all that), but I do love them. As close to perfection as I’ve ever experienced.
Re: Carothers
More DEK1s in AEBL are on the Carothers website. I am more then happy with the tweaked AEBL.
Josh
Re: Carothers
Welp, now I have an FK2 inbound. Thanks enablers! I sure didn't hold out long...
--Jeremy
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Carothers
Looks like I was successful in getting a Basic 5! So, from zero to three in a few weeks. Oy.
Now I need to pump the brakes, hard.
Now I need to pump the brakes, hard.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Carothers
Nice! Yeah I’m pumping the brakes now too, I’ve got some other knives to pay for from a different maker around Christmas time. Lolz
Josh
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Carothers
It's all fun and games until the bill comes due!
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Carothers
I went from 1 (FK) to 3 (FK, Kephart, Dek1), so that means I can buy one more, right?
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Carothers
On the 24th there will be another 50 Basic 5's dropped. There's always room for one more!
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Carothers
Busted out the Kephart for weekend cabin trip, nice knife just a little off for me. Handle is just a hair to short (xl glove size) and I noticed how thick the blade stock was while cutting. I would say the primary bevel is to steep for my taste. Didn't keep any fish so I didn't get to see how it worked for delicate trout. Worked ok for trimming tri-tip, definitely noticed the added width at the tip vs my flat grind lt wright. Left it out for a cheese knife at dinner, definitely not good for cheddar or Hillshire farms...
Going to give the knife another go while actually camping. Knife is definitely over built and has a good heat treat. I put this in the survival category, going to snatch up a condor/another custom with a thinner stock to try. I can get past the short handle, the primary bevel and blade stock are a tad too much.
Going to give the knife another go while actually camping. Knife is definitely over built and has a good heat treat. I put this in the survival category, going to snatch up a condor/another custom with a thinner stock to try. I can get past the short handle, the primary bevel and blade stock are a tad too much.
My socks carry tip up MNOSD Member 0021
-
- Member
- Posts: 12694
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Carothers
Nice post.Snacktime wrote: ↑Wed Sep 15, 2021 9:07 amBusted out the Kephart for weekend cabin trip, nice knife just a little off for me. Handle is just a hair to short (xl glove size) and I noticed how thick the blade stock was while cutting. I would say the primary bevel is to steep for my taste. Didn't keep any fish so I didn't get to see how it worked for delicate trout. Worked ok for trimming tri-tip, definitely noticed the added width at the tip vs my flat grind lt wright. Left it out for a cheese knife at dinner, definitely not good for cheddar or Hillshire farms...
Going to give the knife another go while actually camping. Knife is definitely over built and has a good heat treat. I put this in the survival category, going to snatch up a condor/another custom with a thinner stock to try. I can get past the short handle, the primary bevel and blade stock are a tad too much.
I feel the same way.
This is a total survival/bushcraft knife. And, a Jim Dandy one at that imo.
Btw, sharpened mine up and it's pretty nice now.
You mentioned Condor, and I have a couple of those. In particular the discontinued Baryonyx. Man, talk about a dead useful tool in the woods!!
I think they have another version of it called the Bush Knife. But, I love that Baryonyx.
Anyways, my point is that if your gonna peruse Condor and wanna blade that can pull some kitchen duty as well, then check out Tops and their Frog Market Special knives. I really live the XL version.
They're super thin though.
And, I'm far from any type expert so just know that lol