MT33P - CPM REX 76 Mule Team Release!
Re: MT33P - CPM REX 76 Mule Team Release!
Took about six minutes to place an order from the time it dropped. Laggy, but not miserable. I'm guessing there's less interest in this particular Mule than, say, Magnacut. Hopefully everyone who is looking for one can get it.
Re: MT33P - CPM REX 76 Mule Team Release!
And here I am getting nothing but error 8002 on the Billing & Shipping Details page
- standy99
- Member
- Posts: 2221
- Joined: Sat Jul 22, 2017 11:07 am
- Location: Between Broome and Cairns somewhere
Re: MT33P - CPM REX 76 Mule Team Release!
Are you cutting and pasting any information. I had issues once before and once I stopped cutting and pasting it worked OK
Im a vegetarian as technically cows are made of grass and water.
Re: MT33P - CPM REX 76 Mule Team Release!
Been trying for the past hour. Same error every time. Same thing happened during Magnacut and it eventually just worked...
Re: MT33P - CPM REX 76 Mule Team Release!
Just manually refilled all the fields but no dice
- legOFwhat?
- Member
- Posts: 3155
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: MT33P - CPM REX 76 Mule Team Release!
Wonder if it was billed as Rex45 if it would have sold out faster
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Re: MT33P - CPM REX 76 Mule Team Release!
Mike, please private message me with the email address you used for your account. We can clear that issue. It's our anti-fraud measures.
Kristi
There is nothing more important than this one day.
- standy99
- Member
- Posts: 2221
- Joined: Sat Jul 22, 2017 11:07 am
- Location: Between Broome and Cairns somewhere
Re: MT33P - CPM REX 76 Mule Team Release!
legOFwhat? wrote: ↑Tue Sep 20, 2022 10:19 amWonder if it was billed as Rex45 if it would have sold out faster
Stop talking….
Im a vegetarian as technically cows are made of grass and water.
- legOFwhat?
- Member
- Posts: 3155
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: MT33P - CPM REX 76 Mule Team Release!
standy99 wrote: ↑Tue Sep 20, 2022 10:25 amlegOFwhat? wrote: ↑Tue Sep 20, 2022 10:19 amWonder if it was billed as Rex45 if it would have sold out faster
Stop talking….
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Re: MT33P - CPM REX 76 Mule Team Release!
Got 2, my first mules, thanks
Wondering what's the hardness this rex76 mule heat treated to?
Wondering what's the hardness this rex76 mule heat treated to?
Re: MT33P - CPM REX 76 Mule Team Release!
that's nice, similar to my maxamet native 5. I read about rex76 has this superior edge retention even at red hot temperatures, it may not be that "useful" as a knife, but still unique and interesting to have ~
- legOFwhat?
- Member
- Posts: 3155
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: MT33P - CPM REX 76 Mule Team Release!
Hopefully they shot for the higher end of the hardness scale on these, my Rex45 para 3 is one of my favorite blades so if it's close this knife will rock for a fixie!
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
- BearShark44
- Member
- Posts: 29
- Joined: Wed Jan 12, 2022 12:22 pm
Re: MT33P - CPM REX 76 Mule Team Release!
I bought 1x MT33P this morning - my first mule!
Interesting experience, all the hype... yet this model still hasn't sold out hours later.
Does that mean folks don't like the steel - per Larrin, high hardness, mid-low toughness, more likely to chip?
Looking forward to testing and exchanging feedback. Based on the steel profile, might be a good camp kitchen knife.
In any case, first mule to test making a handle - excited to give it a go.
Thanks @TazKristi and Spyderco team for everything.
Interesting experience, all the hype... yet this model still hasn't sold out hours later.
Does that mean folks don't like the steel - per Larrin, high hardness, mid-low toughness, more likely to chip?
Looking forward to testing and exchanging feedback. Based on the steel profile, might be a good camp kitchen knife.
In any case, first mule to test making a handle - excited to give it a go.
Thanks @TazKristi and Spyderco team for everything.
Last edited by BearShark44 on Tue Sep 20, 2022 12:14 pm, edited 1 time in total.
MT39P-15V, MT33P-Rex76; Sage1-Maxamet, Endela-K390, Delica4-M390, PM2-K390, PM2-S30v, Dragonfly2-SB, AmbitiousSE-8Cr13MoV; others TBD
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: MT33P - CPM REX 76 Mule Team Release!
Well, I am certainly lucky. I try to check as often as I remember to do so. So just now (11 AM) I peek at the mule team forum and discover this is going on. And the limit lifted announcement was there. And I was just able to order two. It doesn't get much better than that!!
-
- Member
- Posts: 2
- Joined: Tue Sep 20, 2022 1:26 pm
Re: MT33P - CPM REX 76 Mule Team Release!
Wish I'd have seen COO before ordering. How's the Taiwanese QC?
Re: MT33P - CPM REX 76 Mule Team Release!
Got one. Looking forward for the next 3. Going on a holiday for 10 days, and once I come back and it's still not sold, I might get another one. Or two. If you don't want to read my rant, you should stop here.
I find it peculiar with all the topics asking for the mule team to be active thing again, and yet everyone is very picky about the steels. I know we live in difficult times. But now imagine with all those social media peeps who only buy it for page views and followers and it's still not sold. And we all know what happens with difficult sales. If the mule team goes on hold again it might never come back. I know I'll get everything that comes from the mule program. Because I want to try out steels that I won't find anywhere else. Unless I fork out few hundred for a custom. A lot of people are like - oh, but this steel is very similar to steel X and it will perform similar. That may be true but then again, unless you try it out in your own hands you'll never know. Everyone have different styles in using a knife and use it for different things. Anyways, rant done.
Congrats to everyone who managed to get one or more, and let's hope the next mule will sell in minutes.
I find it peculiar with all the topics asking for the mule team to be active thing again, and yet everyone is very picky about the steels. I know we live in difficult times. But now imagine with all those social media peeps who only buy it for page views and followers and it's still not sold. And we all know what happens with difficult sales. If the mule team goes on hold again it might never come back. I know I'll get everything that comes from the mule program. Because I want to try out steels that I won't find anywhere else. Unless I fork out few hundred for a custom. A lot of people are like - oh, but this steel is very similar to steel X and it will perform similar. That may be true but then again, unless you try it out in your own hands you'll never know. Everyone have different styles in using a knife and use it for different things. Anyways, rant done.
Congrats to everyone who managed to get one or more, and let's hope the next mule will sell in minutes.
- legOFwhat?
- Member
- Posts: 3155
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: MT33P - CPM REX 76 Mule Team Release!
Anyone pick up a Rex76 from the SFO yet? Hows the quality?
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
-
- Member
- Posts: 2
- Joined: Tue Sep 20, 2022 1:26 pm
Re: MT33P - CPM REX 76 Mule Team Release!
How many were made in this run? I thought they would sell out more quickly.