Spyderco Forums

Some advice please. How best to maintain the original geometry?

John Row

colobbfan

I need input please!
John

Hi John. If it's the "hamaguri" grind, only a buffer will really work. If it's the satin finish flat grind, use the sharpmaker as normal.

sal

Thanks Sal.
John

From Golden, Colorado and the knife cuts HAVE caught up to the paper cuts :)

Hello,

I've had good results using a leather belt in a small belt sander, like 1X30 cheap one from any hardware store. I use fine rouge on the belt and lightly wipe the blade across the moving belt with the blade edge pointing DOWN. Otherwise you'll just cut the belt in half VERY quickly. Be gentle and take you time. Good luck

Thanks OneHandClapping
John

From Golden, Colorado and the knife cuts HAVE caught up to the paper cuts :)