Page 1 of 6

Scale color for 2010 Forum Knife - Manix 2

Posted: Tue Jan 12, 2010 11:04 pm
by Sequimite
It was a route, a landslide, a mandate, a crushing defeat for the other four candidates.

A decisive majority has expressed its preference for the Manix 2 to be the 2010 Forum Knife.

This poll is to select the color of G-10 to go on the Manix 2 forum knife. I have eliminated the two most common colors: black and foliage green; also blue since it just came out in a sprint run.

Depending on the spread, the top two or three vote getters will go to a second round runoff.

Posted: Tue Jan 12, 2010 11:22 pm
by SaturnNyne
Purple, of course.

Yellow would be great, but only if it were turned into a Manix Salt.

Posted: Tue Jan 12, 2010 11:25 pm
by SmoothOne25
yellow g10 has never been done though, right? good job sequ! but i dont like some of the colors since they have been done to death... we need new blood!
also why no powder or lite blue? :confused:

Posted: Tue Jan 12, 2010 11:29 pm
by Sequimite
I should have added that I checked with Halpern Titanium and McMaster Carr to see which colors are readily available and those are the poll choices.

I didn't want to speculate about custom colors which might present difficulties in obtaining and/or be much more expensive.

Posted: Tue Jan 12, 2010 11:53 pm
by jonUSA,EARTH
I chose red.i think that would be cool for a couple reasons, It would be the first red knife since Spyderco's early days,making it that much more special, and its a unique color for G10.
just my .02

Posted: Wed Jan 13, 2010 12:04 am
by Tank
Not being able to see the actual colors I voted red but only if it would be a darker blood red

Posted: Wed Jan 13, 2010 12:12 am
by Sequimite
Tank wrote:Not being able to see the actual colors I voted red but only if it would be a darker blood red
This link will show you sample colors for red, dark green and gray.
http://www.halperntitanium.com/pdf/pricing_g10.pdf

I gather that the color control from batch to batch is not great and I wonder if this is one reason that Spyderco has avoided many of these colors on regular production knives.

Little temp green

Posted: Wed Jan 13, 2010 12:12 am
by supermatch38sa
Lil ´temp Dark green of course!!!!!!

Posted: Wed Jan 13, 2010 12:22 am
by brandonreed2008
+1 for translucent

Posted: Wed Jan 13, 2010 12:39 am
by iwolf81
A translucent Manix would be awesome, but the red would be great too!

Posted: Wed Jan 13, 2010 1:06 am
by Tank
Sequimite wrote:This link will show you sample colors for red, dark green and gray.
http://www.halperntitanium.com/pdf/pricing_g10.pdf

I gather that the color control from batch to batch is not great and I wonder if this is one reason that Spyderco has avoided many of these colors on regular production knives.
Thanks Sequimite, I still vote red after seeing those.. I think that would look really cool.

Posted: Wed Jan 13, 2010 1:17 am
by eneyman
digi camo manix 2 = :eek:

Posted: Wed Jan 13, 2010 1:30 am
by SmoothOne25
you know now that i think about it red may not be that bad either....
never had a red as i dislike, and dont see the point of, buying trainers despite how cool the look. i would like a nice red g10 manix or my first choice of red ukpk with a lock, not a back lock but the type of lock on mili/para's. what is it called again, internal something lock? that is what i want for a 2010 forum knife. but i will settle for anything sal with give me. but if it is a manix 2 i ask for frn and not g10 and i want the frn to look like the old frn pattern like on calypso jr's. you know the funny looking going "both directions" frn look type pattern. although you all want g10 so it wil most likely be that. so red or blue or yelow <---(never a yellow g10)

Posted: Wed Jan 13, 2010 1:32 am
by SmoothOne25
eneyman wrote:digi camo manix 2 = :eek:
like this :p :D :p

http://www.spyderco.com/forums/showthread.php?t=41318

(not my design)

Posted: Wed Jan 13, 2010 1:58 am
by StangBang
Ok hear me out.

I chose red because spyderco's colors are red and black.

I would LOVE to see a red handled and black bladed manix 2. Complete with blacked out hardware and a clip and the black CBBL like seen on the blue manix 2. I think that would be awesome. Maybe etch into the blade something cool.

My other vote would be for orange of course ;)

Posted: Wed Jan 13, 2010 2:17 am
by JaM
(dark) red, for sure.

Too bad, I hoped for the UKPK to become forumknife... ah well. Dont own a MII yet.

Posted: Wed Jan 13, 2010 5:16 am
by Stephen
Blood red/Crimson strikes me as a fascinating idea, translucent just seems kind of mediocre though. Also, I feel that g10 tends to collect particulate matter rather well, so I generally frown upon light colored g10.

Posted: Wed Jan 13, 2010 5:25 am
by jossta
I voted translucent, but I would be good with orange or digicam.

Posted: Wed Jan 13, 2010 5:30 am
by skatenut
Lil' Temp dark green

Posted: Wed Jan 13, 2010 5:42 am
by iwolf81
Would anyone with a Leafstorm care to comment on how its scales have held up over time? If not to well, I would change my vote from translucent to red.

Ira