I agree. People grind it off all the time because it hits their finger. I honestly don't see how it is an issue. You disengage the lock, swing the blade down and release the lock and your finger shouldn't be there when the blade hits home. Why keep your finger there? It's like with the amalgam. People grind off the flipper because it hits their finger. Move your finger! It's really that simple...
Never had an issue with the nub on the shaman either. The way I flick it closed my finger is never there when it hits home.
That's the difference then, I don't flick a compression knife closed. The beauty of the compression lock is that your finger is not in the way of the blade. You can hold a compression lock open and slow roll the knife blade closed using gravity. Compression locks make the most of drop-shut action. The nub on the shaman is the first I've experienced part of the blade contacting the lock face. It's not dangerous, but it's annoying.
To me this is in the same category as a zip tie on the hole or the wave feature on a knife. I have 0 interest in any of them but if it appeals to people then why not? Also this could be interesting because if something like this takes off then I am sure Spyderco will notice and maybe alter future development such as the button lock or some other modified version of the compression lock.
I think the zip-tie wave feature is an appropriate comparison. I got into knives after that whole fad died down, and personally I think zip ties look stupid as **** for zero added benefit. This looks cleaner than that, but I guess I can see how people would see it as dumb looking and not helpful.
I never said to flick it closed. You can let it close slowly under it's own weight, or give it a nudge. Either way works, but I still don't see how the nub is an issue. If the blade doesn't close fully (like when closing slowly and letting go of the lock tab) you can just finish the close with your thumb, and your finger it out of the way and doesn't get hit by the nub.
I prefer not to irreversibly modify my knives, but it's personal preference and up to the user. What get's me is when people do things like that and try to sell and want more than when the knife was new. As with cars, mods don't add value LOL
Re: The "compression made easy"-device - does it actually improve the comp.lock?
I never said to flick it closed. You can let it close slowly under it's own weight, or give it a nudge. Either way works, but I still don't see how the nub is an issue. If the blade doesn't close fully (like when closing slowly and letting go of the lock tab) you can just finish the close with your thumb, and your finger it out of the way and doesn't get hit by the nub.
I prefer not to irreversibly modify my knives, but it's personal preference and up to the user. What get's me is when people do things like that and try to sell and want more than when the knife was new. As with cars, mods don't add value LOL
As I said, it's just annoying to have a piece of the blade clearly cross the face of the lock when the lock was designed to get away from that. I certainly wasn't starting a thread to complain about it, it's just the only reason I thought about buying this device. I will probably do a nub delete at some point, but I have no problem modifying my knives for my use. I've already dyed my scales. Either way, I'm not selling it any time soon. Had to wait a couple months just to have a chance to buy one.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
It's been brought up before, viewtopic.php?t=88697 and I even 3d printed one and tested it. I say if the device is made from metal and screwed to the lock-bar in a discrete manner it would definitely help left handers like myself or possibly those with joint problems. I honestly think Blades We Love has a better solution with their button lock PM2 mod.
Hah! Funny reading my comment on this thread 6 months ago (that i don't remember writing..) and my comment on this current thread. At least I'm consistent..
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Hah! Funny reading my comment on this thread 6 months ago (that i don't remember writing..) and my comment on this current thread. At least I'm consistent..
I have a photographic memory so I can forget conversations if just talking but if I write it down like on here I'll usually remember.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Hah! Funny reading my comment on this thread 6 months ago (that i don't remember writing..) and my comment on this current thread. At least I'm consistent..
I have a photographic memory so I can forget conversations if just talking but if I write it down like on here I'll usually remember.
Photographic memory?! That's pretty cool Josh! I tend to shoot from the hip and not remember a d@mn thing that I've written.. but i do seem to have a certain set of standards that I stick to (i.e. my thoughts/feelings about what I do/don't like about knives/knife accessories..), so my writings on a given day usually match up with my feelings later on.. It's always fun looking back and seeing what I wrote about something at different periods of time.. More often than not, my thoughts/comments line up haha..
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Looks like someone was very bored and just sitting around thinking stuff up.
If you literally mean how it looks, I am with you. For me it does look somewhat crude and not elegant.
Functionwise speaking I think you're perhaps a bit harsh: Might be that in your use a device of that kind makes no sense (or probably in most use cases.
But as even this thread shows:
The comp.lock (like any lock!) has its "weaker" sides, being for example harder to use with gloves, numb or impaired fingers, for lefties and this especially on narrow handles and with small cutouts.
Another being the less-than-ideal ergos on real hard use due to the "hotspotty" cutout.
This device is at least an attempt to improve on this imho.
These would be good reasons for someone to find a knife with a different lock mechanism altogether, not mess up an already good design.
As for me....I'm a Manix 2 fan. The ball bearing lock is awesome.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Looks like someone was very bored and just sitting around thinking stuff up.
If you literally mean how it looks, I am with you. For me it does look somewhat crude and not elegant.
Functionwise speaking I think you're perhaps a bit harsh: Might be that in your use a device of that kind makes no sense (or probably in most use cases.
But as even this thread shows:
The comp.lock (like any lock!) has its "weaker" sides, being for example harder to use with gloves, numb or impaired fingers, for lefties and this especially on narrow handles and with small cutouts.
Another being the less-than-ideal ergos on real hard use due to the "hotspotty" cutout.
This device is at least an attempt to improve on this imho.
These would be good reasons for someone to find a knife with a different lock mechanism altogether, not mess up an already good design.
As for me....I'm a Manix 2 fan. The ball bearing lock is awesome.
Yep!!!
Earlier somebody said something about this add-on making it easier for some people with issues (arthritis, etc) to use the compression lock. The first thing I thought was, if I had issues like that, I'd be looking at models with different locks. Most likely a back lock but maybe even a frame/liner lock or possibly a slip-joint
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Posted: Fri Jul 09, 2021 9:15 pm
by metaphoricalsimile
I ordered one for my Para 3 LW because honestly I feel like the knife is slick and light enough that it feels a little squirrely in my hands when I close it (I've even dropped it at least once), and this thing looks like it will help that.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
I ordered one for my Para 3 LW because honestly I feel like the knife is slick and light enough that it feels a little squirrely in my hands when I close it (I've even dropped it at least once), and this thing looks like it will help that.
Very nice, let us know your impressions. :) agreed on how seemingly slick the Para 3 LW FRN feels, anything to help with the operation counts as an innovation in my book. The price seems too steep for a bit of G10, but the video says that if you factor in economies of scale and R&D then it seems reasonable.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Posted: Fri Jul 09, 2021 10:31 pm
by metaphoricalsimile
Funnily enough it just came in the mail. So far I like it. It's going to take a minute to get used to so I can make a real evaluation, but it does make the knife feel steadier in my hand as I close it with a pinch grip.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Funnily enough it just came in the mail. So far I like it. It's going to take a minute to get used to so I can make a real evaluation, but it does make the knife feel steadier in my hand as I close it with a pinch grip.
Interesting, and thanks for sharing!
This actually does sound like an improvement: Dropping a comp.lock knife while closing it wirh that "pinch grip" method seems to happen and be a concern of some. If this device makes the knife more secure in hand while operating the lock in that way this would actually be a pro.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Posted: Sat Jul 10, 2021 8:49 am
by T.J.
As a lefty, I have no problems with a compression lock as is.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Looks like a "solution looking for a problem" but if people like it then I guess more power to them. I'd rather see the button version made on more models.
Guess you've never experienced arthritis or neuropathy in your hands. This could be a godsend for people with those issues who have comp locks.
I dont put lanyard baubles, aftermarket scales or clips on my knives, but I keep my mouth shut when I see others do it.
Agree the button comp lock on the Smock is the bees knees
That’s a very good point about the arthritis/neuropathy and I hadn’t considered it before your post. I have to say the more elegant solution is definitely the button as implemented on the Smock. As an aftermarket solution for knives without the button this one has no competition yet. I expect if there’s demand we could see implementations that are color matched, more elegant more attractive etc. Much like aftermarket and custom scales.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Posted: Sun Jul 11, 2021 11:11 am
by Fred Sanford
I think it is crap and unnecessary. I can open and close all my comp locks with my left or right hand with zero issues.
I also think the button on the Smock ruins the comp lock and makes it too easy to accidentally unlock IMO.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Funnily enough it just came in the mail. So far I like it. It's going to take a minute to get used to so I can make a real evaluation, but it does make the knife feel steadier in my hand as I close it with a pinch grip.
Do you still like it?
I'm a lefty who found this thread because my wife just bought me a right handed PM2 and I'm trying to find a way to make it usable. I have a lefty PM2 and a lefty PM2 Ultra (i.e., a PM2 Ultra built on a right handed maxamet). I love them. But I find it very cumbersome to use this right handed one.
I'd love to find some way to make the righty as usable as the lefty--the right handers have so many more steel and scale options.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Posted: Thu Oct 28, 2021 6:47 am
by Michael Janich
Dear dizave:
Welcome to the Spyderco Forum.
Stay safe,
Mike
Re: The "compression made easy"-device - does it actually improve the comp.lock?
I'd love to find some way to make the righty as usable as the lefty--the right handers have so many more steel and scale options.
It's all about technique. IMO, the RH PM2 is better for lefties than the LH PM2.
Re: The "compression made easy"-device - does it actually improve the comp.lock?
Posted: Fri Oct 29, 2021 1:13 pm
by Manixguy@1994
I watched the video and checked out the site and to be honest I am intrigued . I may have to order one just to see how it would work for me . Thank you for the heads up, MG2
Re: The "compression made easy"-device - does it actually improve the comp.lock?
I watched the video and checked out the site and to be honest I am intrigued . I may have to order one just to see how it would work for me . Thank you for the heads up, MG2
Should you order and try one: I'd be interested in what you think!
As said in my op: Not only if this thing perhaps makes operation easier, but also if it improves the ergos, since the comp.lock cutout in the scale is somewhat covered.
