Spyderco Forums

blues wrote: ↑

Sun Jan 26, 2020 9:12 am

skybladefromthe wrote: ↑

Sun Jan 26, 2020 9:01 am

:spyder: Nobody liked the KC exclusive, smooth black G10 PM2 Cruwear either.

Correct. I'm nobody and I like it. (PM2 and Para 3.) Then again I have several smooth scaled "traditional" knives so it never presented an issue for me.

Nice! Thank you for the comment.

My pleasure. :cool:

:spyder: Got it. It feels good. I have a nit pick but wont get into it now because I'll need more time with it.
I just checked and they are still available. :spyder:

SteveMidwest wrote: ↑

Sat Jan 25, 2020 4:15 pm

Capt'n Boatsalot wrote: ↑

Sat Jan 25, 2020 11:20 am

Mine arrived yesterday. Really digging it. Scales are beautiful, and while not as grippy as micarta, provide plenty of grip.

I just had to . . . .

Steve, I can´t see the pics you posted (they don´t show)... but I´d really like to

Well, I gave the KC exclusive Shaman a try, but I'm sad to say I'm returning it. I was excited when this came out because I like my Pakkawood Delica, and Rex45 is one of my favorite steels. I don't mind the look or the feel of the Dymondwood handle scale materials on this Shaman, but what really bothers me is the "phenol" chemical smell coming off the handle scale material and the smell that gets on my hands. I'm sure this would wear off/go away over time, but it really bothers me. Back it goes. I'll wait for the Burnt Orange Sprint Run version in Rex45.

skybladefromthe wrote: ↑

Sun Jan 26, 2020 9:01 am

:spyder: Nobody liked the KC exclusive, smooth black G10 PM2 Cruwear either.

Hey, wait -- I thought (and still do) that the smooth black G10 Cruwear knives were absolutely great.

There were some complainers, but hey, nothing is ever unanimous.

I prefer smooth g10 with good ergos. The shaman, smooth native, raffir noble chaparral, and cold steel ultimate hunter are my favorite handles. Definitely liking the scales on this shaman so far.

This certainly didn't disappear as quickly as the Micarta Shaman. Is the Shaman love affair over?

CG

cycleguy wrote: ↑

Sun Jan 26, 2020 7:31 pm

This certainly didn't disappear as quickly as the Micarta Shaman. Is the Shaman love affair over?

CG

One release that doesn't sell out in seconds doesn't mean people are no longer enthusiastic about that model. It just means that Shaman fans weren't quite as excited over this version compared to others.

antnap124 wrote: ↑

Sun Jan 26, 2020 9:02 pm

cycleguy wrote: ↑

Sun Jan 26, 2020 7:31 pm

This certainly didn't disappear as quickly as the Micarta Shaman. Is the Shaman love affair over?

CG

No, the other shaman exclusive sold out in 10 minutes and that was only last week. I think it's just all the confusion around the scales that caused it. I bet the orange rex 45 will sell out quickly and everyone that missed out will be wishing they got this one.

These scales looks so much nicer than the orange. I know I’m in the minority, but I really don’t like the burnt orange shade they use for rex45 & hap40.

cycleguy wrote: ↑

Sun Jan 26, 2020 7:31 pm

This certainly didn't disappear as quickly as the Micarta Shaman. Is the Shaman love affair over?

CG

the Cruwear Micarta phenomenon hit the sweet spot of blade material and handle material at the same time, I believe.

There's a lot of exclusives or sprints where the blade steel is great but folks aren't a fan of the handles, and vice versa. I think this exclusive is missing the sweet spot on the handle material.

cycleguy wrote: ↑

Sun Jan 26, 2020 7:31 pm

This certainly didn't disappear as quickly as the Micarta Shaman. Is the Shaman love affair over?

CG

Doubt it, this variation just wasn't very popular.

curlyhairedboy wrote: ↑

Mon Jan 27, 2020 5:18 am

cycleguy wrote: ↑

Sun Jan 26, 2020 7:31 pm

This certainly didn't disappear as quickly as the Micarta Shaman. Is the Shaman love affair over?

CG

the Cruwear Micarta phenomenon hit the sweet spot of blade material and handle material at the same time, I believe.

There's a lot of exclusives or sprints where the blade steel is great but folks aren't a fan of the handles, and vice versa. I think this exclusive is missing the sweet spot on the handle material.

+1

It was the first large Golden made Micarta folder coupled with arguably the best all around steel on the planet. The model was secondary. It was Cru-carta fever, not Shaman fever.

I'm not at all surprised this KC exclusive is still around, but I would bet the next few Micarta Shamans, especially in Cruwear, PD-1, and K390 will all bet met with the same enthusiasm as the first. Plenty of pent up demand still in that space. A Cru-carta Native, Delica, Dragonfly, Endura, Manix, etc would all be instant sell outs as well

Folks are gonna pass on this and try for the Knifejoker exclusive and/or the burnt orange sprint. Many are gonna get denied and wish they had jumped on this one. The Knifejoker has already sold some through clandestine midnight preorder drops and it is supposedly a small run in the first place. If you are not in the inner circle then it may be hard to snag. I expect the burnt orange to be a bit of a feeding frenzy with them trickling out all over and drying up in seconds at each dealer.

The Shaman madness isn't over yet. I expect to see more to come. I am still holding out hope for a Blue Denim Micarta and K390 exclusive. I hope they do a huge run of them if they do. That will be madness!

same, i'm looking forward to all the micarta variations even more than the steel variations.

The Shaman "love affair" is most certainly not over! :p

I am a little surprised that these "wood" scales are so polarizing. If folks were smart, they'd snag one now if only for the Rex45. Scales are easy to swap! Rex45 will likely be more limited. I fully expect the burnt orange sprint to be difficult to obtain. I'll be sitting that one out, one more for you guys.

Me personally, I'd much prefer the CruCarta Shaman to the Joker DLC/Green in Cruwear, and I like these wood scales over the orange G10 in Rex45. I'm an admitted junkie, but I can live with one example of each steel I like in a given Spydie model. I only have a couple duplicate steels even in my PM2 collection.

I'm a big fan of CPM M4, Maxamet, CruWear, M390, Rex45, and now, K390. But I still have some big love for the "simple" 52100 as Spyderco seasons it. :D

bearfacedkiller wrote: ↑

Mon Jan 27, 2020 7:22 am

The Shaman madness isn't over yet. I expect to see more to come. I am still holding out hope for a Blue Denim Micarta and K390 exclusive. I hope they do a huge run of them if they do. That will be madness!

Man, I am REALLY hoping that particular combo comes to fruition!!! :D If'n my pockets were deep enough, I'd pony up to have the entire run produced and sell 'em myself! :cool:

Wartstein wrote: ↑

Sun Jan 26, 2020 3:32 pm

SteveMidwest wrote: ↑

Sat Jan 25, 2020 4:15 pm

Capt'n Boatsalot wrote: ↑

Sat Jan 25, 2020 11:20 am

Mine arrived yesterday. Really digging it. Scales are beautiful, and while not as grippy as micarta, provide plenty of grip.

I just had to . . . .

Steve, I can´t see the pics you posted (they don´t show)... but I´d really like to

How is this Wartstein? Are my pictures showing up for you now?

I see them now. :cool: Nice RexCarta! :spyder:

Mine is out for delivery! :D

SteveMidwest wrote: ↑

Mon Jan 27, 2020 8:03 am

Wartstein wrote: ↑

Sun Jan 26, 2020 3:32 pm

SteveMidwest wrote: ↑

Sat Jan 25, 2020 4:15 pm

Capt'n Boatsalot wrote: ↑

Sat Jan 25, 2020 11:20 am

Mine arrived yesterday. Really digging it. Scales are beautiful, and while not as grippy as micarta, provide plenty of grip.

I just had to . . . .

Steve, I can´t see the pics you posted (they don´t show)... but I´d really like to

How is this Wartstein? Are my pictures showing up for you now?

You´re a great guy, thanks a lot, now I can see the pics!

And this looks like the perfect Shaman to me, knowing that REX45 is essentially HAP40 (which I like a lot) and the great Micarta scales! Congrats to that knife! :)

Wartstein wrote: ↑

Mon Jan 27, 2020 8:15 am

SteveMidwest wrote: ↑

Mon Jan 27, 2020 8:03 am

Wartstein wrote: ↑

Sun Jan 26, 2020 3:32 pm

SteveMidwest wrote: ↑

Sat Jan 25, 2020 4:15 pm

I just had to . . . .

Steve, I can´t see the pics you posted (they don´t show)... but I´d really like to

How is this Wartstein? Are my pictures showing up for you now?

You´re a great guy, thanks a lot, now I can see the pics!

And this looks like the perfect Shaman to me, knowing that REX45 is essentially HAP40 (which I like a lot) and the great Micarta scales! Congrats to that knife! :)

That's good, and thank you! :D
It is sooooo perfect. :spyder:

It was really hard, leaving my new Cruwear/Micarta knife in the box, since Oct. 10th! Waiting for this Rex 45 to show up, and enable this blade swap. Then, I didn't have time to do the swap for a couple of days (more waiting). And after all of that. I had to wait an additional 24 hours, before carrying. Making sure my tiny drops of Loctite were cured. :p

The pictures turned out a little darker, than the knife appears in hand. Though the scales are darker than when they arrived, due to me rubbing them with a little bit of Food Grade Mineral Oil. The blade, also has a fresh coat of lightweight Silicone Oil. So there will be no patina on my watch!