Spyderco Forums

The stainless clipitools done up in another handle material other than stainless. Preferably FRN. The dream version would be to give it the salt series treatment too. The ULTIMATE dream version would be “saltified” and scaled up to Delica size proportions.

Lambs foot Manix without a finger choil. G10 Magnacut

My dream knife would be a PM2 with a sheepsfoot blade similar to the Benchmade Griptilian with the opening hole. If I could really dream, it would also have a second standoff in place of the lanyard tube like the Yojimbo and a button compression lock like the Smock. That is my dream knife. Hopefully in Magnacut or Cruwear.

I would like:

Caribbean
- Magnacut
- Sheepfoot
- Mirror/Stonewashed Blade finish
- Combination Edge but with only the first 3/4” PE
- Peel-Ply Carbon Fiber with the same milled pattern as the original
- DLC liners and hardware, but not the blade.

I would buy 10 because I would never need a different Spyderco!

Pacific Salt XL with 4" of edge (PS2 has 3.39")

I’m pretty simple with my wishes:

•Wharncliffe Delica in Cruwear.

•Straight Spine Stretch in Cruwear.

•Fixed blade bushcraft type knife in Cruwear (something similar to the Bark River Bravo or Aurora).

Would love them in Magnacut as well.

PM2 Skinny Lockback - Like the Manix2 Lockback, but thinner instead of thicker. Linerless CF with K390 is my dream (would still buy G10 and S30v!)

Slysz Rat

Anything in K390

Haunted House wrote: ↑

Thu Aug 19, 2021 10:23 am

I’m pretty simple with my wishes:

•Wharncliffe Delica in Cruwear.

•Straight Spine Stretch in Cruwear.

•Fixed blade bushcraft type knife in Cruwear (something similar to the Bark River Bravo or Aurora).

Would love them in Magnacut as well.

Now we know what he is haunted by --- Cruwear.

I'd like a matte OD Green Micarta Endela with Delta 3V blade.

I'd want a 3 and 3/4 inch trail point so a xxl version of the rhino. White scales either g10 or terotuf. Wire clip left or right tip up carry. I can't recall any other model using the same lock as the sage 3. So that gets used. Crowned spine, plain edge and fully serrated options both available as well as DLC pe blades. Overall weight 4.2 ounces with a handle thickness of 0.54 inches. Desired steel would be a toss up, however superblue or spy27 would be cool depending on which factory gets assigned.

I'd like to see a manix xl with zwear and brown micarta scales

I had a thought while considering how much I hate H1, and how much I enjoy the Hawkbill Ladybug:

FFG SE Hawkbill Ladybug in K390. I'll buy 10.

a knife in CPM 15V with custom heat treatment.

Probably I have replied already, somewhere in this thread, can´t recall...

As always:
- Just a regular blade shape, ffg, VG10 SE Endura
- Or, an Endela SE, but blade as long as the space in the handle allows for (would boost the cutting edge from 76 mm to 81 or 82 mm) - I actually slightly prefer the Endela over the Endura handle
- Chaparral XL...

These are my favorite models:


But these are my favorite knives:


So, it would be great to have a Chap in fluted Ti and fluted CF.

manix 2 with a stonewashed magnacut blade, putnam micarta scales, and a brass cage.

ticn se h1 ladybug hawkbill with red and black zome handle (the ladybug ladybug).

Deadboxhero wrote: ↑

Tue Apr 26, 2022 12:09 am

a knife in CPM 15V with custom heat treatment.

I feel like you're trying to tell us something. Is it finally ready?

Deadboxhero wrote: ↑

Tue Apr 26, 2022 12:09 am

a knife in CPM 15V with custom heat treatment.

ZrowsN1s wrote: ↑

Sun Aug 08, 2021 6:43 pm

G-10 (Dark Blue or Green) Hawkbill Dragonfly.
Plain Edge K390.....

Still.

A Left Hand Para 3 ! Pleaseeeee ! MG2

If I had a Magnacut PM2 I would probably drop Fat Carbon scales on it and I could die a happy man.