After market scales
After market scales
Has anyone used this easy mod?
The Spyderco scales on my Para 3 are fine, but I like to MOD, so ordered canvas Micarta. They (for me) improve the grip greatly. Got them from KC, forgot the name.
The Spyderco scales on my Para 3 are fine, but I like to MOD, so ordered canvas Micarta. They (for me) improve the grip greatly. Got them from KC, forgot the name.
SCARAMOUCHE!
Re: After market scales
I haven't done it yet but since I don't wear black a lot I'd like to swap my stock G10 scales with something lighter. I might buy some 1/8 inch thick tero tuf and get busy with the laser cutter at work.
Currently carrying a Manix 2 G10 and a Chicago G10.
- kennethsime
- Member
- Posts: 4855
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: After market scales
Yup.
I like RGT’s micarta scales the best so far, but I haven’t tried them all.
Let’s see some pics of your newly-improved Para 3!
I like RGT’s micarta scales the best so far, but I haven’t tried them all.
Let’s see some pics of your newly-improved Para 3!
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: After market scales
I have Micarta scales on one of my Enduras.
Bidirectional FRN certainly is still more secure in hand, but this only comes into play in exceptionally slippery conditions.
Otherwise Micarta always just feels great in hand for me (have it on some non Spydie fixed blades too).
Bidirectional FRN certainly is still more secure in hand, but this only comes into play in exceptionally slippery conditions.
Otherwise Micarta always just feels great in hand for me (have it on some non Spydie fixed blades too).
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
-
- Member
- Posts: 6149
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: After market scales
I put "skinny mod" micarta scales on one of my Cruwear P3s. For me, it was a marked improvement. It no longer feels crowded to my hand.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
- restless ghost
- Member
- Posts: 241
- Joined: Wed Jan 20, 2016 3:27 am
Re: After market scales
RGT Natural Canvas Micarta scales
- Manixguy@1994
- Member
- Posts: 13883
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: After market scales
I’ve done to scale mods by RGT , Smock in Terotuf and Shaman in Burlap Micarta . Made very well . I have plans for two more in future but because of both knives only offered by RC Bladeworks. MG2
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Re: After market scales
Just put a set of Flytanium Lotus scales on a Para 3. They're contoured green micarta and are a marked improvement from my perspective.
Re: After market scales
Yessir.. whether or not I mod the scales usually depends on the original scales for me.. I'm ok with most G10 & FRN, but I'm not the biggest fan of CF, so most of my mods have been on CF or CF/G10-scaled Spydies (& other brand knives). Sharp Dressed Knifes Micarta scales have been a huge improvement to my Smock and GB2.
Rick H.
..well, that escalated quickly..
..well, that escalated quickly..
Re: After market scales
This might be a good place to ask - has anyone come across any green or natural micarta scales for the manix 2 xl? I’ve ordered some blanks as a last resort to try and make them, but it would be a world more straightforward with the tight tolerances needed to just buy some pre-made. I can always use up the micarta blanks on mules.
- Al
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
- kennethsime
- Member
- Posts: 4855
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: After market scales
Alan Putnam has a listing for them, but none in stock.JoviAl wrote: ↑Fri Feb 10, 2023 6:46 pmThis might be a good place to ask - has anyone come across any green or natural micarta scales for the manix 2 xl? I’ve ordered some blanks as a last resort to try and make them, but it would be a world more straightforward with the tight tolerances needed to just buy some pre-made. I can always use up the micarta blanks on mules.
Vivi definitely had some micarta scales on his M2XL.
Here is a very expensive M2XL with micarta preinstalled.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: After market scales
Cheerskennethsime wrote: ↑Fri Feb 10, 2023 10:34 pmAlan Putnam has a listing for them, but none in stock.JoviAl wrote: ↑Fri Feb 10, 2023 6:46 pmThis might be a good place to ask - has anyone come across any green or natural micarta scales for the manix 2 xl? I’ve ordered some blanks as a last resort to try and make them, but it would be a world more straightforward with the tight tolerances needed to just buy some pre-made. I can always use up the micarta blanks on mules.
Vivi definitely had some micarta scales on his M2XL.
Here is a very expensive M2XL with micarta preinstalled.
- Al
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
Re: After market scales
i emailed allen putman at bladescales and he said the micarta he uses for his scales is on backorder. i've been waiting very impatiently because i want a set for my 15v manix. hopefully they restock soon.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
- kennethsime
- Member
- Posts: 4855
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: After market scales
RC Bladeworks is another option for the Manix 2, but not the Manix 2 XL.
If I were trying to get M2XL scales, like I am for my Stretch 2 XL, I’d just be emailing everyone who does good work and asking them to make me some. I haven’t had luck with the S2XL yet, but that show I got my Stretch 2 scales.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: After market scales
yeah. i've been looking at all the sites for different knives, but i've always wanted the bladescales micarta on a manix. im going to go with rcbladeworks for a different knife.kennethsime wrote: ↑Sat Feb 11, 2023 11:05 amRC Bladeworks is another option for the Manix 2, but not the Manix 2 XL.
If I were trying to get M2XL scales, like I am for my Stretch 2 XL, I’d just be emailing everyone who does good work and asking them to make me some. I haven’t had luck with the S2XL yet, but that show I got my Stretch 2 scales.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
Re: After market scales
I did not at first then I tried a couple of the easiest to grab in Europe for not much money, or came upon second hand scales from fellow french Spyderfans.
1. Para 3 with Terotuf "slim" scales by Fireside.co
2. Para 3 with micarta (I don't know which one, my guess is brown linen) scales by RippsGarageTech
3. PM2 with green canvas micarta, I think they are called "lotus scales" by Flytanium. I had chosen another color, but I had to send them back because of defects. They still are beautiful and very comfortable !
4. Brouwer with carbon fiber front scale (liner delete) by Flytanium. I did just put the scale back on for the picture, i came to prefer the original G10 scale.
5. PM2 with carbon fiber scales that must come from China since I paid like 15 bucks to get them from someone.
What I've learned is that I'm bond to making my own scales once I have an actual place to set all of my tooling. Even if I'm not biased towards one handle material more than another (for folders), I tend to go for linen micarta, like the Domino front scale I just ordered from RC Bladeworks (It's red linen micarta, me likey). I'm in Europe so it's very expensive to import most set of scales, like the gorgeous aluminium scales made by AWT.
1. Para 3 with Terotuf "slim" scales by Fireside.co
2. Para 3 with micarta (I don't know which one, my guess is brown linen) scales by RippsGarageTech
3. PM2 with green canvas micarta, I think they are called "lotus scales" by Flytanium. I had chosen another color, but I had to send them back because of defects. They still are beautiful and very comfortable !
4. Brouwer with carbon fiber front scale (liner delete) by Flytanium. I did just put the scale back on for the picture, i came to prefer the original G10 scale.
5. PM2 with carbon fiber scales that must come from China since I paid like 15 bucks to get them from someone.
What I've learned is that I'm bond to making my own scales once I have an actual place to set all of my tooling. Even if I'm not biased towards one handle material more than another (for folders), I tend to go for linen micarta, like the Domino front scale I just ordered from RC Bladeworks (It's red linen micarta, me likey). I'm in Europe so it's very expensive to import most set of scales, like the gorgeous aluminium scales made by AWT.
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
- Manixguy@1994
- Member
- Posts: 13883
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: After market scales
Look awesome Robin ! Dan
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Re: After market scales
Nice looking scales, all.
Particularly the Para 3 less the "hump" on the belly, feels better a.
Particularly the Para 3 less the "hump" on the belly, feels better a.
SCARAMOUCHE!
- Manixguy@1994
- Member
- Posts: 13883
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: After market scales
I
I checked Putman scales ,love them but site says right hand only so leaves me out . Oh well always can admire Ricks ! Danladybug93 wrote: ↑Sat Feb 11, 2023 11:31 amyeah. i've been looking at all the sites for different knives, but i've always wanted the bladescales micarta on a manix. im going to go with rcbladeworks for a different knife.kennethsime wrote: ↑Sat Feb 11, 2023 11:05 amRC Bladeworks is another option for the Manix 2, but not the Manix 2 XL.
If I were trying to get M2XL scales, like I am for my Stretch 2 XL, I’d just be emailing everyone who does good work and asking them to make me some. I haven’t had luck with the S2XL yet, but that show I got my Stretch 2 scales.
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Re: After market scales
if you really wanted them, maybe you can request a left hand set or modify them yourself. it should be relatively easy to mark the holes on the inside using the liner, remove the liner, and then drill small-diameter holes. they don't have to be perfect either because the clip will cover them. the screw just needs to be able to reach the liner to secure the clip in place.Manixguy@1994 wrote: ↑Sat Feb 11, 2023 6:18 pmI checked Putman scales ,love them but site says right hand only so leaves me out . Oh well always can admire Ricks ! Dan
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26