Straight Razor from Spyderco
Straight Razor from Spyderco
Hello everyone. I'm Mike Blue. I mostly lurk here but after a discussion with Sal, I've been asked to post this subject and collect the thoughts of everyone willing to share.
Those of you who know Sal, may or may not know that he shaved with a straight razor for decades. I've made a few knives, learned a bit about steel and collected a great many friends similarly affected by the disease of steel over the years. I also shave with a straight razor.
What would you think if Spyderco added a straight razor to the product line?
Those of you who know Sal, may or may not know that he shaved with a straight razor for decades. I've made a few knives, learned a bit about steel and collected a great many friends similarly affected by the disease of steel over the years. I also shave with a straight razor.
What would you think if Spyderco added a straight razor to the product line?
- Stuart Ackerman
- Member
- Posts: 2091
- Joined: Tue Dec 07, 2004 2:39 pm
- Location: New Zealand
- Contact:
Re: Straight Razor from Spyderco
Hi Mike.
It being discussed before over the years...never went anywhere.
See what folk say now?
It being discussed before over the years...never went anywhere.
See what folk say now?
-
- Member
- Posts: 12710
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Straight Razor from Spyderco
I'd prolly wind up in the dam E.R. lol
Re: Straight Razor from Spyderco
It's going somewhere now, Stuart.
Mac, a straight razor is the world's best meditation tool for being in the moment. If you are not paying attention and relaxed, bad things can happen. Effortlessly.
Mac, a straight razor is the world's best meditation tool for being in the moment. If you are not paying attention and relaxed, bad things can happen. Effortlessly.
Re: Straight Razor from Spyderco
I’ve never shaved with a straight razor but if Spyderco made one I would be willing to give it a shot.
Re: Straight Razor from Spyderco
I'd probably pick one up
Re: Straight Razor from Spyderco
Yup, I’d buy one if it were made with a great steel that had awesome edge retention and corrosion resistance like s110v.
My face deserves the absolute best!
My face deserves the absolute best!
Dane
“Stop buying your kids what you never had and start teaching them what you never knew!”
“Stop buying your kids what you never had and start teaching them what you never knew!”
-
- Member
- Posts: 12710
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Straight Razor from Spyderco
Oh, it's so cool man, the thought of it. I'll bet it's a fantastic shave too. I've never had a straight razor shave before.
I should've prolly gotten one, while in NYC last Decemeber.
Re: Straight Razor from Spyderco
I'm currently sporting a beard, but what the hey; I'd buy one and maybe even use it to shave.... :D
- John
"Spyderco"...Vēnērunt, vīdērunt, vīcērunt
"Spyderco"...Vēnērunt, vīdērunt, vīcērunt
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Straight Razor from Spyderco
I have negative interest in straight razors, sorry. IMO, it seems unwise to tool up for what seems like a passing trend. I could be wrong, Sal would know the market better.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Straight Razor from Spyderco
I have never used a straight razor but if Spyderco made one then I would give it a try.
Do right always. It will give you satisfaction in life.
--Wovoka
--Wovoka
-
- Member
- Posts: 5860
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: Straight Razor from Spyderco
It's interesting. I've often thought of trying a straight razor but haven't yet. If Spyderco makes one at a cost within my means I might buy one.
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
-
- Member
- Posts: 6958
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: Straight Razor from Spyderco
I used to shave with one, and I would definitely pick one up from Spyderco even though I've worn a beard for thirty years or so. Let's see where this goes this time.
Re: Straight Razor from Spyderco
Your use of the past tense did not go unnoticed.
I like my double-edged razor. The setup is a very nice Japanese handle, Russian blades, Italian soap, and silver-tip brush. Before I'd go electric, I'd sooner trade in my Spydercos on Pakistani switchblades. Using a disposable razor is like shaving with garden shears.
With that said, I'm intrigued by the straight-razor experience, but I'm not convinced that it's better than what I currently have.
- Stuart Ackerman
- Member
- Posts: 2091
- Joined: Tue Dec 07, 2004 2:39 pm
- Location: New Zealand
- Contact:
Re: Straight Razor from Spyderco
Mike...
It is good to know that you might be doing one with Sal... :)
I do think that a Spy Razor should be part of the Spyderco line... :)
I submitted one in early 2000's and it was too off the wall it seems...
It is good to know that you might be doing one with Sal... :)
I do think that a Spy Razor should be part of the Spyderco line... :)
I submitted one in early 2000's and it was too off the wall it seems...
-
- Member
- Posts: 12710
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Straight Razor from Spyderco
I'd love to see what ya had in mind Stuart :DStuart Ackerman wrote: ↑Thu Jan 16, 2020 8:12 pmMike...
It is good to know that you might be doing one with Sal... :)
I do think that a Spy Razor should be part of the Spyderco line... :)
I submitted one in early 2000's and it was too off the wall it seems...
- Stuart Ackerman
- Member
- Posts: 2091
- Joined: Tue Dec 07, 2004 2:39 pm
- Location: New Zealand
- Contact:
Re: Straight Razor from Spyderco
I showed it here a few years ago, but the image host site went crazy...
I have a jpeg here and there, but this thread is about Mike's version anyway... :)
I have a jpeg here and there, but this thread is about Mike's version anyway... :)
- The Mastiff
- Member
- Posts: 5968
- Joined: Sun Jun 04, 2006 2:53 am
- Location: raleigh nc
Re: Straight Razor from Spyderco
No straight razors for me. Spyderco or otherwise. I have a few already that I never use. I shave my face and scalp and I'm usually in a hurry so cut throat razors are out for me.
For those of you thinking about new supersteel razors be aware it will more likely be something with little to no carbide. There are stainless steels that can be used but nothing along the line of M390, S30, etc. 52100 or superblue might be the upper edge of carbide but better yet 1070 or 80. :)
For those of you thinking about new supersteel razors be aware it will more likely be something with little to no carbide. There are stainless steels that can be used but nothing along the line of M390, S30, etc. 52100 or superblue might be the upper edge of carbide but better yet 1070 or 80. :)
-
- Member
- Posts: 332
- Joined: Sun Feb 03, 2019 8:02 pm
Re: Straight Razor from Spyderco
I'd imagine something like AEB-L would be good for such a project
-
- Member
- Posts: 213
- Joined: Mon Apr 27, 2009 12:19 am
Re: Straight Razor from Spyderco
I've had a beard for decades, so it's not something I'd be interested in. But if Spyderco ever makes a cigar cutter, I'd buy that.