Forum Update/Maintenance & Move - PLEASE READ
-
- Member
- Posts: 3957
- Joined: Mon Jun 13, 2022 8:05 am
- Location: Atlanta,Georgia USA Earth
Re: Forum Update/Maintenance & Move - PLEASE READ
Well I guess I’m late to the party but the forum looks great Kristi I’m not really tech-savvy so just I keep checking this thread for updates and instructions…didn’t realize how much of a morning/evening ritual this place was until it was offline…I get up at 4:49 am every morning except Sunday and it’s kinda like having coffee with friends, even the dogs look at me like “Dude, really?”
Anyway glad everything worked out or is getting worked out
Anyway glad everything worked out or is getting worked out
Re: Forum Update/Maintenance & Move - PLEASE READ
I'm loving the new formatting options
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: Forum Update/Maintenance & Move - PLEASE READ
The new contrast is a big improvement, thanks!
Agreed.
While the font size is adjustable if logged in, the "unlogged" font size is tiny! That would affect the many readers of the forum who don't log in, possibly encouraging them to just click away to elsewhere.
Agreed.
While the font size is adjustable if logged in, the "unlogged" font size is tiny! That would affect the many readers of the forum who don't log in, possibly encouraging them to just click away to elsewhere.
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: Forum Update/Maintenance & Move - PLEASE READ
+1Bolster wrote: ↑Fri Mar 15, 2024 7:29 pmThe new contrast is a big improvement, thanks!
Agreed.
While the font size is adjustable if logged in, the "unlogged" font size is tiny! That would affect the many readers of the forum who don't log in, possibly encouraging them to just click away to elsewhere.
Re: Forum Update/Maintenance & Move - PLEASE READ
100 % agreed - on both "easier to read now" AND the great job Kristi does!!
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Forum Update/Maintenance & Move - PLEASE READ
RamZar wrote: ↑Fri Mar 15, 2024 1:46 pmPlease check out Mr Blonde's videos (page below) from the Amsterdam Meet and they're giving error messages.
viewtopic.php?t=96308&start=140
True.
This is the only downside I can see so far (among a lot of improvements!) and I hope it can be fixed.
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Forum Update/Maintenance & Move - PLEASE READ
TazKristi wrote: ↑Fri Mar 15, 2024 12:39 pmSo, the difference is I'm using the "Share" link from the video you posted instead of the URL, and it's working. My best guess is that it's YouTube and how they allow links to be used within other platforms (the extension we're using in this case). Try it again using the link given when you click "Share" on YouTube. @Buddafucco @TkoK83Spy @JSummJSumm wrote: ↑Fri Mar 15, 2024 10:33 amI cannot figure out how to get the YouTube image to pop up.TkoK83Spy wrote: ↑Fri Mar 15, 2024 9:19 amI must be a little slow today, but I can't figure out which option we're supposed to hit to insert a Youtube video. Used to be a small circle with a black arrow pointed towards the right. When I select the option that looks similar now, it says something about invalid bb codes or something along those lines?
https://youtu.be/6_BK5n994JM
https://youtu.be/6_BK5n994JM?si=ATy4yavJaWNwSB7n
I've clicked the Share link below videos, and then clicked Copy Link, but all that shows up here is the link that takes you to watch it on YouTube.
I must be a slow learner.
Jim
-
- Member
- Posts: 1800
- Joined: Thu Jun 27, 2019 4:08 am
- Location: Norway
Re: Forum Update/Maintenance & Move - PLEASE READ
Great work Kristi and team!
Back in time for my saturday morning coffee, doesn’t get any better than that.
No let’s see what happens at 9AM ..that’s in one minute - gotto post
Edit to add: posting seems to be much snappier than before, and it’s now 9AM CET and the forum is not showing “General error”. Outstanding!
Back in time for my saturday morning coffee, doesn’t get any better than that.
No let’s see what happens at 9AM ..that’s in one minute - gotto post
Edit to add: posting seems to be much snappier than before, and it’s now 9AM CET and the forum is not showing “General error”. Outstanding!
- eventhorizon
- Member
- Posts: 156
- Joined: Fri Nov 13, 2020 3:50 am
- Location: center of Europe
Re: Forum Update/Maintenance & Move - PLEASE READ
James Y wrote: ↑Sat Mar 16, 2024 1:50 amTazKristi wrote: ↑Fri Mar 15, 2024 12:39 pmSo, the difference is I'm using the "Share" link from the video you posted instead of the URL, and it's working. My best guess is that it's YouTube and how they allow links to be used within other platforms (the extension we're using in this case). Try it again using the link given when you click "Share" on YouTube. @Buddafucco @TkoK83Spy @JSummJSumm wrote: ↑Fri Mar 15, 2024 10:33 amI cannot figure out how to get the YouTube image to pop up.TkoK83Spy wrote: ↑Fri Mar 15, 2024 9:19 amI must be a little slow today, but I can't figure out which option we're supposed to hit to insert a Youtube video. Used to be a small circle with a black arrow pointed towards the right. When I select the option that looks similar now, it says something about invalid bb codes or something along those lines?
https://youtu.be/6_BK5n994JM
https://youtu.be/6_BK5n994JM?si=ATy4yavJaWNwSB7n
I've clicked the Share link below videos, and then clicked Copy Link, but all that shows up here is the link that takes you to watch it on YouTube.
I must be a slow learner.
Jim
Doesn't work for me either.
I tried the dedicated "Embed any video" button for Youtube as well, doesn't work either, just getting an error message "You cannot use certain BBCodes".
notorious fidgeteer
Re: Forum Update/Maintenance & Move - PLEASE READ
Does anybody else's unread notifications for threads your subscribed to show up like this? Then once it's clicked on, then it's contents are able to be seen.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
- Paul Ardbeg
- Member
- Posts: 425
- Joined: Sun May 14, 2023 11:39 am
- Location: The Netherlands
Re: Forum Update/Maintenance & Move - PLEASE READ
Yesterday it was fine but since this morning i'm seeing blank notices as well.
PM2 Crucarta, Manix 2 lw s110v, Manix 2 blackout, Shaman, Tenacious, GB1, GB2, Smock, Kapara, Native 5 s90v, Chaparral cts-xhp faceted Ti, Para 3 blackout flytanium scales. PM2 M390 DLT exclusive, Caly 3 Superblue sprint run, Police PE ATS-55, Mcbee, Caly 3.5 ZDP189 CF, PM2 Maxamet, Millitary CF s90v sprint run, Lil' Native CF s90v sprint run, Mule CPM Rex T15, Spydiechef, Amalgam.
MNOSD member #0052
***Memento mori, memento vivere***
MNOSD member #0052
***Memento mori, memento vivere***
Re: Forum Update/Maintenance & Move - PLEASE READ
Yes. They are glared out until I click on it.
MRj “Weak things break!”
#0048
#0048
-
- Member
- Posts: 12640
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Forum Update/Maintenance & Move - PLEASE READ
Same here with YouTube videos - the url is not working.
- Mr Blonde
- Member
- Posts: 7658
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Netherlands, Europe, Earth
- Contact:
Re: Forum Update/Maintenance & Move - PLEASE READ
JSumm wrote: ↑Fri Mar 15, 2024 1:28 pmIs there by chance some admin settings that are opened up for you, but not typical users? Like a permissons setting. Looks like the video and the mentions even copied from your text will not display the same.TazKristi wrote: ↑Fri Mar 15, 2024 12:39 pmSo, the difference is I'm using the "Share" link from the video you posted instead of the URL, and it's working. My best guess is that it's YouTube and how they allow links to be used within other platforms (the extension we're using in this case). Try it again using the link given when you click "Share" on YouTube. @Buddafucco @TkoK83Spy @JSumm
https://youtu.be/6_BK5n994JM?si=ATy4yavJaWNwSB7n
BTW, this has been an incredibly smooth transtion. You and your team deserve applause!
That could be something that is happening, while trying to get my videos embedded in various methods offered by the new software, I'm getting a message indicating I have no 'permission to post media'.
Re: Forum Update/Maintenance & Move - PLEASE READ
I'm guessing so. Kristi was able to use all the new functions including mentions. But copying her exact text or implementing the same characters doesn't work. When Kristi tagged us, we were notified, so it is definitely is working. I'm sure they'll figure it out next week when they are back at work.Mr Blonde wrote: ↑Sat Mar 16, 2024 11:45 amJSumm wrote: ↑Fri Mar 15, 2024 1:28 pmIs there by chance some admin settings that are opened up for you, but not typical users? Like a permissons setting. Looks like the video and the mentions even copied from your text will not display the same.TazKristi wrote: ↑Fri Mar 15, 2024 12:39 pmSo, the difference is I'm using the "Share" link from the video you posted instead of the URL, and it's working. My best guess is that it's YouTube and how they allow links to be used within other platforms (the extension we're using in this case). Try it again using the link given when you click "Share" on YouTube. @Buddafucco @TkoK83Spy @JSumm
https://youtu.be/6_BK5n994JM?si=ATy4yavJaWNwSB7n
BTW, this has been an incredibly smooth transtion. You and your team deserve applause!
That could be something that is happening, while trying to get my videos embedded in various methods offered by the new software, I'm getting a message indicating I have no 'permission to post media'.
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
Re: Forum Update/Maintenance & Move - PLEASE READ
Just realized: I don't get e mail notifications anymore when I get quoted / someone replies to a post of mine... and yes, I did check if all the relevant boxes are clicked correctly: They are.
Does not really bother me though, just thought I'd still mention it.
Does not really bother me though, just thought I'd still mention it.
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Forum Update/Maintenance & Move - PLEASE READ
Whoa, Rick, that's mostly my icon there... did I really quote you that much? (And you never actually read any of it? )
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- jabba359
- Member
- Posts: 4958
- Joined: Fri Feb 10, 2006 11:07 pm
- Location: North Hollywood, CA U.S.A. Earth
- Contact:
Re: Forum Update/Maintenance & Move - PLEASE READ
I keep getting errors today. After reloading the page once, twice, or thrice, the pages will usually load.
Re: Forum Update/Maintenance & Move - PLEASE READ
Same here... both on the cellphone and laptop
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- cabfrank
- Member
- Posts: 2883
- Joined: Sun May 08, 2011 9:07 pm
- Location: Northern California, USA, Earth
Re: Forum Update/Maintenance & Move - PLEASE READ
Rick and Paul, my notifications are showing up blank also.