Reveal 15: Shivering with Anticipation
Reveal 15: Shivering with Anticipation
If we can make predictions from past Reveals, it might be another week or so until we see v15.
I'm trying not to care. It can take months until the revealed knives hit the streets, so what's the point of getting excited? I'd really like a serrated Manix LW, but recently a lot of serrated knives have been discontinued. Does that mean that Spyderco is focusing on plain edges for the time being? Or maybe they're clearing out all the old serrated edges because they're preparing to reveal something even better. Or maybe, just maybe, there is something entirely new that's coming from the Top Secret Facility in Golden.
What are we supposed to do between now and the next Reveal?
All these uncertainties are driving me mad!
Re: Reveal 15: Shivering with Anticipation
In the meanwhile…. Hope reveal 14 knives start dropping like snow flakes…. Dunno…
Whatever turns you on, cupcake.
Still plays with knives…
Still plays with knives…
Re: Reveal 15: Shivering with Anticipation
i feel this statement.
it would be really great to see a couple of military 2 salts in the same vein as the pm2 salts. a spy27 military 2 would be sweet as well.
manix versions of these would be great too, but i'm not going to get my hopes up for something like that yet.
i'd love to see a blacked out stretch 2 xl salt and a green lc200n version.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Reveal 15: Shivering with Anticipation
I can´t understand why there still is no Manix 2 LW SE... and yes, serrated knives got discontinued, but quite some new models or variations came in both PE and SE right from the start (Stretch XL in VG10 and H2, Native Chief LW in BD1N, LC and MC, the Chap will get an SE version and some more examples)RustyIron wrote: ↑Sun Jan 07, 2024 1:48 pm
If we can make predictions from past Reveals, it might be another week or so until we see v15.
I'm trying not to care. It can take months until the revealed knives hit the streets, so what's the point of getting excited? I'd really like a serrated Manix LW, but recently a lot of serrated knives have been discontinued. Does that mean that Spyderco is focusing on plain edges for the time being? Or maybe they're clearing out all the old serrated edges because they're preparing to reveal something even better. Or maybe, just maybe, there is something entirely new that's coming from the Top Secret Facility in Golden.
What are we supposed to do between now and the next Reveal?
All these uncertainties are driving me mad!
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- WilliamMunny
- Member
- Posts: 1184
- Joined: Fri Jan 29, 2021 1:20 pm
Re: Reveal 15: Shivering with Anticipation
I was also really hoping for a MagnaCut Manix LE Serrated. I might end up just getting the Stretch XL Salt as it could be months but probably a year or two before we see the Manix Salt SE. I feel like if it was coming they would have announced it along side the PE.Wartstein wrote: ↑Sun Jan 07, 2024 3:10 pm
I can´t understand why there still is no Manix 2 LW SE... and yes, serrated knives got discontinued, but quite some new models or variations came in both PE and SE right from the start (Stretch XL in VG10 and H2, Native Chief LW in BD1N, LC and MC, the Chap will get an SE version and some more examples)
I think the Stretch will fit the bill just wish it had a little better steel than H2.
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
Re: Reveal 15: Shivering with Anticipation
My wallet was lost in a boating accident.
Military/PM2/P3 Native Chief/Native GB2 DF2 PITS Chaparral Tasman Salt 2 SE Caribbean Sheepfoot SE SpydieChef Swayback Manix2 Sage 1 SSS Stretch 2 XL G10
Re: Reveal 15: Shivering with Anticipation
I thought the reveals were not gonna drop "schedully" anymore. My understanding was that a big reveal like Reveal 14 would leave us with no reveal for a good amount of time.
If a Reveal 15 is coming, I hope we'll see the Piute in it !
If a Reveal 15 is coming, I hope we'll see the Piute in it !
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
- spydergoat
- Member
- Posts: 403
- Joined: Sat Jul 20, 2019 1:04 am
- Location: California, USA, Earth
Re: Reveal 15: Shivering with Anticipation
Good idea! Makes sense, the pacific salt black blade sees to do well. The yellow handle has not grown on me at all.
As for Reveal 15 I am not needing or expecting to see any new models for a little while because they're still working on shipping so many previously announced knives.
Re: Reveal 15: Shivering with Anticipation
especially since many of us long time pac salt fans think that the stretch 2 xl salt will replace the pacific in our daily carry. the pacific will always hold a special place in my heart, but the s2xl has unquestionably better ergonomics and just a hair more edge. it's such a great design.spydergoat wrote: ↑Sun Jan 07, 2024 6:10 pmGood idea! Makes sense, the pacific salt black blade sees to do well. The yellow handle has not grown on me at all.
As for Reveal 15 I am not needing or expecting to see any new models for a little while because they're still working on shipping so many previously announced knives.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Reveal 15: Shivering with Anticipation
Hoping for Chaparral news since they retired half the lineup from the current catalog, IIRC
Re: Reveal 15: Shivering with Anticipation
I hope you guys who want serrated get your wish, but it's no mystery why there aren't more serrated blades in knives. People tend not to by SE in the quantities they buy PE. It's a small market segment that wants SE, and those who do buy SE, tend to buy it in relatively small quantities (with rare but notable exceptions!). The data hints that the ratio is around 7:1 or 8:1, PE:SE, and this data was from Spyderco diehards, who probably buy more SE than most brand loyalists. So you can see why a knife manufacturer would prioritize PE--to stay in business, they have to go where the market goes. Think of all the mfgrs who don't do any SE at all. If the market were there, they likely would. Graphic from last year's survey.
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
- WilliamMunny
- Member
- Posts: 1184
- Joined: Fri Jan 29, 2021 1:20 pm
Re: Reveal 15: Shivering with Anticipation
Makes sense, out of the 10 or so Spydercos I have I just bought my second SE, Stretch XL Salt, and I think it is all I will need for a while in SE.Bolster wrote: ↑Sun Jan 07, 2024 9:10 pmI hope you guys who want serrated get your wish, but it's no mystery why there aren't more serrated blades in knives. People tend not to by SE in the quantities they buy PE. It's a small market segment that wants SE, and those who do buy SE, tend to buy it in relatively small quantities (with rare but notable exceptions!). The data hints that the ratio is around 7:1 or 8:1, PE:SE, and this data was from Spyderco diehards, who probably buy more SE than most brand loyalists. So you can see why a knife manufacturer would put more effort into PE--they have to go where the market goes. Think of all the mfgrs who don't do any SE at all. If the market were there, they likely would. Graphic from last year's survey.
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
- kennethsime
- Member
- Posts: 4786
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: Reveal 15: Shivering with Anticipation
I think I'm confused on how the Reveals work - didn't we just get 14? Is it once per quarter?
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: Reveal 15: Shivering with Anticipation
I'd suggest that we wildly speculate and then argue about it!
Re: Reveal 15: Shivering with Anticipation
my favorite!!!
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Reveal 15: Shivering with Anticipation
Bolster wrote: ↑Sun Jan 07, 2024 9:10 pmI hope you guys who want serrated get your wish, but it's no mystery why there aren't more serrated blades in knives. People tend not to by SE in the quantities they buy PE. It's a small market segment that wants SE, and those who do buy SE, tend to buy it in relatively small quantities (with rare but notable exceptions!). The data hints that the ratio is around 7:1 or 8:1, PE:SE, and this data was from Spyderco diehards, who probably buy more SE than most brand loyalists. So you can see why a knife manufacturer would prioritize PE--to stay in business, they have to go where the market goes. Think of all the mfgrs who don't do any SE at all. If the market were there, they likely would. Graphic from last year's survey.
Good points when it comes to the general proportion of SE knives Spyderco makes!
But: Exactly looking at that whole picture (Spyderco and SE) it IS a mystery why there is no SE MANIX.
Again: While it is true what you say, they still bring out a lot of models, often new ones or variants of existing in both PE and SE (and sometimes CE) - also very recently (Bodacious, Stretch XL LW in VG10 and H2; Native Chief LW in three steel options; Native 5 Salt; Lil Native LW; Millie; Para 3 LW.....)
So the do SE and they anticipate that people want and buy SE.
Now the Manix has a huge "following" already, many like it, and even if the general proportion of those who like SE is not that big: There just has to be quite an intersection of those who like both the Manix and SE, and a Manix SE would be a guaranted seller (also there will be a lot of collectors who would get a Manix SE just as a unique variant).
And "all" Spyderco would have to do is grinding teeth in a proportion of Manix LWs they make.
And when it comes to Salt knives: There it is really not the exception, but rather the norm that they do also come in SE.
Must be a reason for that, right?
So why no teeth exactly for the Manix 2 Salt ??
(Like I said in the dedicated thread I started on this (viewtopic.php?t=95667#p1748541) this is not meant as a complaint, I am just wondering..)
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: Reveal 15: Shivering with Anticipation
The Dodofly is coming...I can feel it!
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
Re: Reveal 15: Shivering with Anticipation
I'm just waiting on things already revealed. Looking forward to comparing a Native Chief Salt to the Stretch Salt, and keeping an eye out for the Catcherman and Crucarta Manix XL to drop.
Re: Reveal 15: Shivering with Anticipation
There is so much good stuff in the queue that we already know about. The induced demand is strong. The mystery only makes it stronger.