Manix 2 52100 question
-
- Member
- Posts: 2
- Joined: Sun Oct 15, 2023 7:45 am
Manix 2 52100 question
Hello all,
I hope this is the correct place for posting this. I have recently bought a used Manix 2 52100 and I am super happy with it.
Today I found a small grind mark right next to the jimpings which for me sounds like it is a factory second blade. The seller told be it was not sold to him like that.
What confuses me at the moment is, that the grind mark is underneath the DLC coating. That would mean it was marked before final QC.
Now my questions: Did anyone saw that before? Is it probably a factory second or just some manufacturing defect which was not recognized? I cannot find anything issues on the blade or knife itself.
Thanks in advance for your help. I will try to upload some pictures.
Best regards,
Thorsten
I hope this is the correct place for posting this. I have recently bought a used Manix 2 52100 and I am super happy with it.
Today I found a small grind mark right next to the jimpings which for me sounds like it is a factory second blade. The seller told be it was not sold to him like that.
What confuses me at the moment is, that the grind mark is underneath the DLC coating. That would mean it was marked before final QC.
Now my questions: Did anyone saw that before? Is it probably a factory second or just some manufacturing defect which was not recognized? I cannot find anything issues on the blade or knife itself.
Thanks in advance for your help. I will try to upload some pictures.
Best regards,
Thorsten
-
- Member
- Posts: 3004
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Longmont, CO USA
- Contact:
Re: Manix 2 52100 question
Dear ThorstToast:
Welcome to the Spyderco Forum.
I have never seen a blade marked as a second before it was DLC coated. That's very strange.
Stay safe,
Mike
Welcome to the Spyderco Forum.
I have never seen a blade marked as a second before it was DLC coated. That's very strange.
Stay safe,
Mike
Re: Manix 2 52100 question
I wonder if someone touched it up with a cold bluing pen or something like that to blend the notch.
Re: Manix 2 52100 question
That was my first thought. I've definitely seen that, before.
Currently testing: M398, D3, SLD-Magic
Favorites: 10V, s90v
Wishlist: S290, Vancron, S125V, K890
18 Spydies, 15 steels
13 Maxace, 9 steels
https://instagram.com/cnyknifenut
https://youtube.com/@CNYKnifeNerd
Favorites: 10V, s90v
Wishlist: S290, Vancron, S125V, K890
18 Spydies, 15 steels
13 Maxace, 9 steels
https://instagram.com/cnyknifenut
https://youtube.com/@CNYKnifeNerd
- WilliamMunny
- Member
- Posts: 1187
- Joined: Fri Jan 29, 2021 1:20 pm
Re: Manix 2 52100 question
Generally the seconds mark is farther away from the jimping, but anything is possible.
My guess is that it is a second, but who knows.
My guess is that it is a second, but who knows.
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
Re: Manix 2 52100 question
All of the DLC factory seconds I have were marked after the DLC coating was applied, like Mike said. I’d agree with Gtscotty and Giygas, it does look touched up.
Rest assured, if it is a factory second it will work fine and any flaws are purely cosmetic. I really can’t tell why many of my factory seconds are factory seconds.
Here’s how my PM 2’s are marked:
Rest assured, if it is a factory second it will work fine and any flaws are purely cosmetic. I really can’t tell why many of my factory seconds are factory seconds.
Here’s how my PM 2’s are marked:
Re: Manix 2 52100 question
I’ve also never seen a factory second marked before it is DLC coated.
It looks like there is marring on the high points of the jimping as well. That may or may not be a clue from an impact on that part of the knife. Although, I would also expect the DLC to wear off if that was a chip or blemish from an impact.
It looks like there is marring on the high points of the jimping as well. That may or may not be a clue from an impact on that part of the knife. Although, I would also expect the DLC to wear off if that was a chip or blemish from an impact.
- Nick
- cabfrank
- Member
- Posts: 2890
- Joined: Sun May 08, 2011 9:07 pm
- Location: Northern California, USA, Earth
Re: Manix 2 52100 question
It looks different from the seconds I have seen. Maybe, maybe not.
-
- Member
- Posts: 340
- Joined: Mon Sep 24, 2018 8:13 am
Re: Manix 2 52100 question
I'd call it "unique" and carry on
-
- Member
- Posts: 2
- Joined: Sun Oct 15, 2023 7:45 am
Re: Manix 2 52100 question
Thanks Mike! Happy to be here.
Really love the Manix 2 - the 52100 steel is super sharp :) I guess I will handle it definitely like it’s a unique piece
Thank you very much for your feedbacks.
Greetings,
Thorsten
Re: Manix 2 52100 question
Looks like the perfect user to me, welcome to the forum!