Bang-for-buck >3" Spydies on the used market?
Bang-for-buck >3" Spydies on the used market?
In the "carrying today" thread I made a comment on a forumite's Spy27 Manix that it must be one of the best bang-for-buck particle knives on the used market, occasionally seen on eBay in the low $100 range. And then I got to thinking, there may be even better bang-for-buck Spydercos on the used market.
I know smaller sized knives sell for less, but I consider decent blade size, PM steel, and a monster lock to be part of the "bang" in the bang-for-buck calculation, which is why I nominated the SPY-Mx.
What would you nominate?
I know smaller sized knives sell for less, but I consider decent blade size, PM steel, and a monster lock to be part of the "bang" in the bang-for-buck calculation, which is why I nominated the SPY-Mx.
What would you nominate?
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
-
- Member
- Posts: 60
- Joined: Mon Feb 13, 2023 1:23 pm
Re: Bang-for-buck >3" Spydies on the used market?
Not counting all the recent discounted Spydies …..
I would still say the Endura is right up there for buck bang. Still find some ZDPs out there - $100 or less -and that’s a good deal!
But I do agree on the SPY Manix - great steel and great deal!
I would still say the Endura is right up there for buck bang. Still find some ZDPs out there - $100 or less -and that’s a good deal!
But I do agree on the SPY Manix - great steel and great deal!
Re: Bang-for-buck >3" Spydies on the used market?
Endura or Delica in an ultra high carbide steel. There's been some great k390 and 20cv deals lately.
Re: Bang-for-buck >3" Spydies on the used market?
The Tenacious in S35VN is a great deal even at MAP pricing, and is an absolute steal if you can find it deeply discounted on the used market. Excellent ergos, a sturdy liner lock, with one of the most balanced stainless particle metallurgy knife steels outside of Magnacut. Decent platform for customization, too, as there are a lot of third-party aftermarket parts available for the model.
Re: Bang-for-buck >3" Spydies on the used market?
Everything zulu said about the Tenacious S35VN goes for the Resilience S35VN, too. I got mine well under the already low MAP. Very inexpensive for what it is.
Re: Bang-for-buck >3" Spydies on the used market?
as much as i love the manix, i would have a hard time not recommending the 20cv delica wharnie from knifejoy at $75 over a $100+ used manix lw right now.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Bang-for-buck >3" Spydies on the used market?
Resilience for $60 is tough to beat if I can't nominate Cara Caras.
Shout out to ebaying Pacific Salt 1's for $40-80.
Shout out to ebaying Pacific Salt 1's for $40-80.
Re: Bang-for-buck >3" Spydies on the used market?
Agreed. I don’t think I have seen a brand new Spyderco knife with 20cv steel that cheap in years.
Just one more knife...
Re: Bang-for-buck >3" Spydies on the used market?
A pm2 fully serrated s30v factory second sold last night for $78 on eBay. I thought that was an excellent price.
Lc200n, s90v, magnacut, 20v, 204p, cruwear, s110v, 15v, cts-xhp
Re: Bang-for-buck >3" Spydies on the used market?
It doesn't come with a particle metallurgy steel as standard & recent price hikes have probably taken it out of the running as an entry-level Spyderco, but I still think the bog-standard Delica 4 offers decent relative value for the price in the ~3" space, especially now that the retail cost of non-Spyderco Chinese-made folders in steels like 154CM, AUS-10, & 14C28N have continued to go up. I think VG10 has become kind of underrated in recent years—it is still a perfectly serviceable user steel that has a decent balance of characteristics for a folding knife steel, and I actually prefer it over BD1N or 154CM. And for me, at least, the Delica's ergonomics are among the best in the size range for the type of cutting I do.