K390 in the Spyderco Byte; a compliment and two requests
K390 in the Spyderco Byte; a compliment and two requests
What Spyderco has done with K390 availability is amazing and commendable. Such a huge benefit to all of us steel junkies to have such an amazing steel so affordable and easily available. It remains a favorite of mine. I have 2 Police 4's (g10 pe and frn se), a Wharncliffe Delica, Wharncliffe Dragonfly, 2 ladybugs, and a manbug in K390. And I'm planning on adding the Wharncliffe Endura next. I suspect there will be others. Much like H1, it's not a steel where I've ever said, well I've already got 3 knives in that steel, I'll wait for something new. It's an 'I would like more of that' steel.
So two requests....
First that picture is awesome and can you make a poster of it and sell it on Spyderco.com?
Second... looking at that picture only one thing nags at me... can we get a Hawkbill in K390? Any Hawkbill? If you're looking for a suggestion I would immediately say Hawkbill Dragonfly. But I would buy literally any K390 Hawkbill.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: K390 in the Spyderco Byte; a compliment and two requests
After reading the latest newsletter, I’m wanting to try some K390. I don’t actually need the steel, but I’m becoming more curious.
- Capt'n Boatsalot
- Member
- Posts: 659
- Joined: Mon Apr 15, 2013 10:50 pm
- Location: Iowa
Re: K390 in the Spyderco Byte; a compliment and two requests
Count me in for this idea! That would be an awesome poster!
MNOSD member 0030
Re: K390 in the Spyderco Byte; a compliment and two requests
I definitely plan on acquiring some K390 Spydercos. The ones I’m most interested in tend to be a bit pricier (LT3LW, Enuff 2), and are pretty new additions so I haven’t gone for any yet.
I think the Stretch and probably another longer option in SpyderEdge are some I’ll end up getting. For the Stretch might want to try swapping a pair of Ivory FRN scales from the Straight Spine Sprint, if I can find some.
I hope the LeafJumper and/or RockJumper join this list, though.
I think a Hawkbill is a good idea too and maybe a Lil’ Matriarch as well.
I’m super interested in SpyderHawk, Lil’ Matriach, and RockJumper/LeafJumper Salts, as Salts are just better for me, but K390 versions would be excellent as well.
I think the Stretch and probably another longer option in SpyderEdge are some I’ll end up getting. For the Stretch might want to try swapping a pair of Ivory FRN scales from the Straight Spine Sprint, if I can find some.
I hope the LeafJumper and/or RockJumper join this list, though.
I think a Hawkbill is a good idea too and maybe a Lil’ Matriarch as well.
I’m super interested in SpyderHawk, Lil’ Matriach, and RockJumper/LeafJumper Salts, as Salts are just better for me, but K390 versions would be excellent as well.
rex121 is the king of steel, but nature’s teeth have been cutting for hundreds of millions of years and counting :cool:
Re: K390 in the Spyderco Byte; a compliment and two requests
Spydeco is doing a wonderful job with the k390 in my personal experience. I and I love the fact that they introduced it in ever growing family of knives, plus they went with a FRN lightweight handle that is not only very purposeful, but also helps to keep the cost down. I have so far only the PM2 and Urban, but I am very tempted by the Lil' Temperance for a heavy duty knife. The Enuff 2 in k390 is surely going to be a go-to working knife for many.
I am pretty sure that the L/R Jumper will join the family soon too.
... And what about Jumpmaster 2 in k390? Just thinking loud here ... :)
I am pretty sure that the L/R Jumper will join the family soon too.
... And what about Jumpmaster 2 in k390? Just thinking loud here ... :)
... I like weird ...
- legOFwhat?
- Member
- Posts: 3152
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: K390 in the Spyderco Byte; a compliment and two requests
Why is that photo screaming "buy a police" to me?
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Re: K390 in the Spyderco Byte; a compliment and two requests
A manix 2/manix 2 lightweight would be amazing with k390! Heck… a shaman! Absolutely love my k390 endela!
Bryan
Atlanta, GA
IG @BryanCBailey
Current pocket rotation:
Z-Wear/Micarta Shaman
Magnacut Native 5 LW
k390 Endela
: 73 Spydies in the collection
Atlanta, GA
IG @BryanCBailey
Current pocket rotation:
Z-Wear/Micarta Shaman
Magnacut Native 5 LW
k390 Endela
: 73 Spydies in the collection
Re: K390 in the Spyderco Byte; a compliment and two requests
The photo is amazing, but what I am hoping to see in its 2.0 iteration: A K390 Stretch XL...
This would definitely be my first K390 purchase, and despite my general preference for SE I'd get this particular knife in PE.
This would definitely be my first K390 purchase, and despite my general preference for SE I'd get this particular knife in PE.
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: K390 in the Spyderco Byte; a compliment and two requests
It is. I can hear it. You should
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-
- Member
- Posts: 364
- Joined: Sat Feb 19, 2022 2:20 am
Re: K390 in the Spyderco Byte; a compliment and two requests
If they release more models in K390, I will buy them. If they release a poster I may buy it.Matus wrote: ↑Mon Feb 27, 2023 2:13 pmSpydeco is doing a wonderful job with the k390 in my personal experience. I and I love the fact that they introduced it in ever growing family of knives, plus they went with a FRN lightweight handle that is not only very purposeful, but also helps to keep the cost down. I have so far only the PM2 and Urban, but I am very tempted by the Lil' Temperance for a heavy duty knife. The Enuff 2 in k390 is surely going to be a go-to working knife for many.
I am pretty sure that the L/R Jumper will join the family soon too.
... And what about Jumpmaster 2 in k390? Just thinking loud here ... :)
Re: K390 in the Spyderco Byte; a compliment and two requests
That's a cool photo. Interestingly enough however, the photo doesn't show them all! Where both a PE and SE option is available, only one or the other for each model actually made it into the photo.
-
- Member
- Posts: 1833
- Joined: Thu Jun 27, 2019 4:08 am
- Location: Norway
Re: K390 in the Spyderco Byte; a compliment and two requests
That pic makes me want to try the enuff 2. The handle seems very well sized for me. Even more so than I assumed from just reading the specs.
Always wanted to see the OG become available in a leaf shaped salt, as I don't have much use for a SE sheepsfoot in that specific configuration, but sadly such a version never came about.
Not sure where the E2 fits into my life right now, and as much as I like k390 for EDC, I think it will be easier to find such a place for a stainless E2.
Always wanted to see the OG become available in a leaf shaped salt, as I don't have much use for a SE sheepsfoot in that specific configuration, but sadly such a version never came about.
Not sure where the E2 fits into my life right now, and as much as I like k390 for EDC, I think it will be easier to find such a place for a stainless E2.
- spoonrobot
- Member
- Posts: 855
- Joined: Sat Jun 23, 2007 10:37 am
- Location: Rome, Georgia USA
- DansGearAddiction
- Member
- Posts: 200
- Joined: Sun Sep 06, 2020 10:47 pm
- Location: Connecticut, USA
Re: K390 in the Spyderco Byte; a compliment and two requests
I'm hoping more factories beside Seki will get K390. A Native and/or Manix and K390 would be marriages made in heaven.
With that being said, I'm particularly looking forward to the LeafJumper in K390 if that happens.
With that being said, I'm particularly looking forward to the LeafJumper in K390 if that happens.
Current Collection
Chaparral (LW, Stepped, Stealth, Sun & Moon), Dragonfly 2 (VG-10), McBee, Stretch 2 (K390), UKPK Salt (LC200N)
Chaparral (LW, Stepped, Stealth, Sun & Moon), Dragonfly 2 (VG-10), McBee, Stretch 2 (K390), UKPK Salt (LC200N)
- WilliamMunny
- Member
- Posts: 1187
- Joined: Fri Jan 29, 2021 1:20 pm
Re: K390 in the Spyderco Byte; a compliment and two requests
Maybe a cool screen background of that picture.
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
Re: K390 in the Spyderco Byte; a compliment and two requests
Have been waiting for:
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: K390 in the Spyderco Byte; a compliment and two requests
Oooh Bolster that's a mic drop right there.
Re: K390 in the Spyderco Byte; a compliment and two requests
my next purchase will likely include a wharncliffe delica or wharncliffe endura in k390.
bolster, that sage looks great. i wonder about k390 in taichung though. it's apparently been established that seki rules for k390. i think the k390 leafjumper sal teased will satiate me for this kind of mid size leaf blade in this steel.
bolster, that sage looks great. i wonder about k390 in taichung though. it's apparently been established that seki rules for k390. i think the k390 leafjumper sal teased will satiate me for this kind of mid size leaf blade in this steel.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: K390 in the Spyderco Byte; a compliment and two requests
I have no use for one of these, but good Lord do I want one!
- Al
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE