Spyderco Forums

Posted: **Mon Mar 07, 2022 3:25 pm**

If anybody's SRS13 is sheathless... Boltaron Sheath's are back In Stock at Spyderco.com... https://www.spyderco.com/catalog/detail ... heath/1039

Posted: **Tue Mar 08, 2022 12:36 am**

It takes a keen edge pretty easily, is probably my sharpest knife now. 600 grit followed by a 9 5 1 and 0.5 micron stropping progression. Anyone do any type of edge retention testing?

Posted: **Tue Mar 08, 2022 12:36 am**

duplicate post deleted

Posted: **Tue Mar 08, 2022 12:27 pm**

Just paid the customs fee for it. Should be there any day now.

Posted: **Thu Mar 10, 2022 1:06 am**

By the looks of it mine is going back to the sender. It got stuck for 6 days in LA area, then arrived in London Heathrow, got stuck for another 8 days, and today's updates shows that it arrived in US yesterday and it's currently "in transit to destination". Very confusing. I can't get trough the phone and my emails didn't get any response. All I can do is just sit and wait.
Edit.
Just got email from Parcelforce and they claim my parcel haven't even left the US. Even more confusing. I guess I'll wait for it till next friday and see what happens.
Edit 2:
Finally it says out for delivery. So hopefully I'll have it in the evening when I get home.
Final Edit:
Got it. It took almost a month, but it's finally here. First impressions - i like it. With the time i'll get to know it better.
Thanks Sal, and the entire Spyderco crew for keep pumping these mules out.

Posted: **Thu Mar 10, 2022 3:12 pm**

They must've mistakenly tagged it for flight and forgot the parcel. The fact that it doesn't shaw as scanned at London gives some hope.
Mine did this before entering France :

Kinda the same except tracking didn't place it in France in between steps.

Edit : Mine's here :)

Posted: **Fri Mar 18, 2022 3:22 pm**

FullScaler wrote: ↑
Thu Mar 03, 2022 10:09 pm
Still waiting on mine to get here. When I check the USPS tracking number it says it was delivered to an address in Los Angeles 10 days ago but my invoice and shipping Email clearly show my Address In B.C. Canada. I'll give it a few more days to see if it arrives but it usually takes less than 2 weeks to get here and I have never seen that tracking error like that before.

I don't know if you've received yours, but we got similar situation, mine was delivered to a P.O. box in Los Angeles then no any update for days though the final destination shall be Canada. But finally I got mine a week ago. Hopefully you can get yours soon, or better you've got them.

Posted: **Fri Mar 18, 2022 4:26 pm**

Hi Dextar,

Welcome to our forum. Enjoy your Mule.

sal

Posted: **Fri Mar 18, 2022 8:57 pm**

sal wrote: ↑
Fri Mar 18, 2022 4:26 pm
Hi Dextar,

Welcome to our forum. Enjoy your Mule.

sal

Thank you

Posted: **Sat Mar 19, 2022 2:37 am**

Dextar wrote: ↑
Fri Mar 18, 2022 3:22 pm

FullScaler wrote: ↑
Thu Mar 03, 2022 10:09 pm
Still waiting on mine to get here. When I check the USPS tracking number it says it was delivered to an address in Los Angeles 10 days ago but my invoice and shipping Email clearly show my Address In B.C. Canada. I'll give it a few more days to see if it arrives but it usually takes less than 2 weeks to get here and I have never seen that tracking error like that before.
Hey Dexter, nice to see another Canuck here. Yea, I finally got mine last week. I think it was one of the sharpest factory finishes on any Mule I have received so far. Bodes well and I am interested to do some testing.

I don't know if you've received yours, but we got similar situation, mine was delivered to a P.O. box in Los Angeles then no any update for days though the final destination shall be Canada. But finally I got mine a week ago. Hopefully you can get yours soon, or better you've got them.

Posted: **Mon Mar 21, 2022 11:45 am**

Waiting to get my first Mule to reach me in N.S. Canada. The current status is that it's pending acceptance at L.A. There was a bit of confusion during shipping, but Team Spyderco took care of it, just a few more days to go.

Posted: **Mon Mar 21, 2022 2:16 pm**

Dear ranjitrajkumar:

Welcome to the Spyderco Forum.

Stay safe,

Mike

Posted: **Mon Apr 18, 2022 7:32 pm**

Fireman wrote: ↑
Thu Feb 17, 2022 11:21 am
Are there any others made in Japan?
This will demand Japanese inspired scales
Sushi mule?

Here you go:

Cheers!
-burly

Posted: **Tue Apr 19, 2022 9:23 am**

Very Nice Job burly,

If there is another, more radical Mule Team Modification out there I would like to see it. My forum memory is not long enough to know if there is one, but burly.... this is a rad mod.

I have done a lot of shaving sticks on a cutting board recently, taking care to smack the edge into the board and test out some use and abuse. This mod would have saved my knuckles for sure. I really want to take that set up for a spin.

Do you have a plan for the hole in the tang? The perfectly shaped piece of amber with a spider in it might work.

It sure looks like you could pinch grip the blade and slice all day with joy.

Posted: **Wed Apr 20, 2022 10:11 pm**

Bravo!!! Maybe a custom mosaic pin in the hole? It can be filled in and you would not know it.

Spyderco Forums

Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?

Re: Who got the SRS13?