I am not a fan of FRN no matter what the blade or steel is. Feels cheap and weak to me.
Unpopular opinions
-
- Member
- Posts: 378
- Joined: Mon Jun 05, 2023 4:58 pm
Re: Unpopular opinions
1. Fully agree
2. Agreed when it comes to EDC or SD but small knives have their place for sure
3. Not a fan of backlocks except when Spyderco does them. They are rock solid and a pleasure to use. I think right now my favorite lock is the CBB
- Traditional.Sharpening
- Member
- Posts: 285
- Joined: Thu Mar 02, 2023 12:29 am
Re: Unpopular opinions
What about 8cr13mov do you find lacking specifically and what type of steel do you feel would be an upgrade?Mini2white wrote: ↑Thu Aug 06, 2020 12:33 pmI like many knives but wish the blade steel was something else. The Bow River is something I could use but I'd like a better steel option. The Tenacious and Resilience again are a great design but need a better steel option. For the same reason I don't buy the high carbon steels that rust if you look at them sideways. That corrosion on the outside is a lot worse on the inside.
Do you have examples of what you are talking about with high carbon steel knives? I've actually not seen this happen but have seen plenty of superficial surface rust that's easily removed with and acid like Barkeeper's Friend or a Scotchbrite pad and leaves zero pitting behind. I have, however, seen a few examples of pitting on stainless steels. Pics would be nice also.
Re: Unpopular opinions
Too many knives as jewelry posts in the knife community and not enough knives as tools. Half the posts on the Facebook group when the 15v models came out involved immediately swapping scales and clips. I guess people don't NEED a knife as often as they want to. Meanwhile social media mechanic have no qualms using and abusing their $2-300 ratchets
Also fuzzy Micarta feels weird to me. I like it polished, but the fuzzy variant feels like holding a piece of fire hose, and gets real grimey.
Also fuzzy Micarta feels weird to me. I like it polished, but the fuzzy variant feels like holding a piece of fire hose, and gets real grimey.
-
- Member
- Posts: 378
- Joined: Mon Jun 05, 2023 4:58 pm
Re: Unpopular opinions
Spittin facts hereGarageBoy wrote: ↑Sun Aug 13, 2023 9:33 amToo many knives as jewelry posts in the knife community and not enough knives as tools. Half the posts on the Facebook group when the 15v models came out involved immediately swapping scales and clips. I guess people don't NEED a knife as often as they want to. Meanwhile social media mechanic have no qualms using and abusing their $2-300 ratchets
Also fuzzy Micarta feels weird to me. I like it polished, but the fuzzy variant feels like holding a piece of fire hose, and gets real grimey.
Re: Unpopular opinions
I don't like the compression lock (wrote in detail as to why elsewhere).
Yes, the backlock is the best.
All FRN models should have PB washers (some have nothing at all).
I think Spyderco should reshore the production from China.
Yes, the backlock is the best.
All FRN models should have PB washers (some have nothing at all).
I think Spyderco should reshore the production from China.
Military/PM2/P3 Native Chief/Native GB2 DF2 PITS Chaparral Tasman Salt 2 SE Caribbean Sheepfoot SE SpydieChef Swayback Manix2 Sage 1 SSS Stretch 2 XL G10
-
- Member
- Posts: 378
- Joined: Mon Jun 05, 2023 4:58 pm
Re: Unpopular opinions
apologies for my newb question but what's PB stand for? I'm assuming the "b" means bushing?
- Spicy Suplex
- Member
- Posts: 237
- Joined: Mon Nov 15, 2021 11:14 am
- Location: SoCal
Re: Unpopular opinions
ImHereForTheMilitary2 wrote: ↑Sun Aug 13, 2023 10:41 amapologies for my newb question but what's PB stand for? I'm assuming the "b" means bushing?
Phosphor-bronze washers
-
- Member
- Posts: 378
- Joined: Mon Jun 05, 2023 4:58 pm
Re: Unpopular opinions
Ahh thank you kind sirSpicy Suplex wrote: ↑Sun Aug 13, 2023 10:55 amImHereForTheMilitary2 wrote: ↑Sun Aug 13, 2023 10:41 amapologies for my newb question but what's PB stand for? I'm assuming the "b" means bushing?
Phosphor-bronze washers
- Spicy Suplex
- Member
- Posts: 237
- Joined: Mon Nov 15, 2021 11:14 am
- Location: SoCal
Re: Unpopular opinions
Happy to help!
Re: Unpopular opinions
I love black G10 handles.
I like wire clips on G10 handles.
I like FRN.
I love translucent blue FRN (but don't own any).
I like the Caribbean handle exactly as it was designed.
I 'collect' knives that will never have meaningful lives, only sometimes cutting slim slivers of paper.
I like wire clips on G10 handles.
I like FRN.
I love translucent blue FRN (but don't own any).
I like the Caribbean handle exactly as it was designed.
I 'collect' knives that will never have meaningful lives, only sometimes cutting slim slivers of paper.
Re: Unpopular opinions
If I like a knife, I usually modify it. I can't leave well enough alone. This is sometimes viewed as foppery on the forum, disdained as form over function, but it's how I'm wired. An unmodified knife means I'm not interested in it. Same with rifles, handguns, fishing equipment, etc.
Probably not unpopular, just different: I choose clip type, brand and location based on how the knife feels in hand, not which pocket I plan to carry it in, for depth of carry, or speed of deployment.
Probably not unpopular, just different: I choose clip type, brand and location based on how the knife feels in hand, not which pocket I plan to carry it in, for depth of carry, or speed of deployment.