Spyderco Value Knives

Discuss Spyderco's products and history.
User avatar
justjohn
Member
Posts: 105
Joined: Sun Dec 10, 2017 7:46 pm
Location: North Carolina, USA, Earth

Spyderco Value Knives

Postby justjohn » Wed Dec 04, 2019 6:30 pm

I would like some honest feed back/recommendations on the Spyderco Value Folders line of knives please. Chinese made merchandise has never interested me, but knowing the high production standards of Spyderco has caused me to want look into this. Thanks in advance for any and all help! :D
- John

:spyder: "Spyderco"....nuff said! :spyder:

User avatar
steelcity16
Member
Posts: 3238
Joined: Mon Dec 11, 2017 11:34 am

Re: Spyderco Value Knives

Postby steelcity16 » Wed Dec 04, 2019 6:37 pm

I have owned most of the flagship models out of Golden and Seki at one time or another and the Chinese made Tenacious remains a favorite of mine. It is a fantastic design and the quality is top notch. It really is an unbeatable value. I'm very excited for the Tenacious Lightweight and will be getting one as soon as they launch! I'd recommend starting here.
:spyder: CRU-CARTA THEM ALL! :spyder:

TomAiello
Member
Posts: 3454
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Spyderco Value Knives

Postby TomAiello » Wed Dec 04, 2019 7:08 pm

The value is very good. You won't get cutting edge steel choices, but for a budget knife, they're really, really good.

FWIW, I've recently bought several Chinese knives off eBay (actual original Chinese knives from Chinese designers--not just the dumb knock off copies of other knives) and I've been very favorably impressed with them. I've gotten some that rival $250 US and European knives for $100. I am revolted by the blatant copying, but there is at least one Chinese manufacturer that's making legitimate non-copy designs, using Chinese designers (with actual credit to the designers and makers marks).

User avatar
BLUETYPEII
Member
Posts: 390
Joined: Tue Jul 31, 2018 1:02 pm
Location: Mesa Arizona

Re: Spyderco Value Knives

Postby BLUETYPEII » Wed Dec 04, 2019 7:13 pm

I’m wondering the same thing.

I’ve been tempted many a time by the Spyderco Resilience but I have just never pulled the trigger on one. I really enjoy large folders.

Does anyone know if there is a quality difference between Spyderco’s 8Cr13MoV and Byrd’s?
:spyder: :spyder: 14 Spyderco in 7 different steels and 1 Byrd :spyder: :spyder:

User avatar
JuPaul
Member
Posts: 895
Joined: Thu Jun 27, 2019 7:06 am

Re: Spyderco Value Knives

Postby JuPaul » Wed Dec 04, 2019 7:39 pm

The Alcyone, Tenacious and Bow River are all excellent Chinese-made spydercos. I'm sure there are many more, but I have personal experience with these. For the price, the quality is top notch and they are all excellent designs IMO. As was said above, you won't get high-end steel, but even Spyderco's 8cr13mov seems better than the rest.
Be excellent to each other. - Bill S. Preston, Esq.

GarageBoy
Member
Posts: 1148
Joined: Sun Nov 14, 2004 6:49 pm
Location: Brooklyn NY

Re: Spyderco Value Knives

Postby GarageBoy » Wed Dec 04, 2019 7:55 pm

They're not flashy like the lower end Kershaw's and crkts, but they have solid spyderco ergos and design

User avatar
JonLeBlanc
Member
Posts: 1011
Joined: Sun May 13, 2018 8:00 am
Location: Louisiana

Re: Spyderco Value Knives

Postby JonLeBlanc » Wed Dec 04, 2019 8:01 pm

I think one gets quite a lot of knife for a great price in the Value line. I don't own one but I got my brother an Efficient for Christmas once and it's a great little knife and he likes it a lot. It was one of the OD green Sprints. Very good build quality for the price. I reckon one can't go wrong with them.
My collection so far: 52100 Military (2); 52100 PM2 (2); 52100 Para3; Stretch2 V-Toku; KnifeWorks M4 PM2; BentoBox M390 PM2; BentoBox S90V Military; Police4 K390; S110V PM2; SS Delica AUS-6; Wayne Goddard Sprint VG-10
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara

User avatar
Vivi
Member
Posts: 6458
Joined: Mon Oct 29, 2007 8:15 am

Re: Spyderco Value Knives

Postby Vivi » Wed Dec 04, 2019 8:21 pm

All of my experiences with Chinese made Spydercos and Byrds have been positive.

The Bow River is very well made. I find it excels at cutting board work and food prep in general, handy knife for the camp site.

The Cara Cara 2 is my favorite take on the Endura handle. It's like a full flat grind Endura 3 with an index choil and 4 way clip. Lots of scale material options, including the recently discontinued but still available Ti.

The Crossbill is a good budget Hawkbill. Cheap way to try out a unique blade shape before investing in a pricier option like the Tasman Salt 2.

The Tenacious and Resilience are both well made. Great blade geometry with an edge going all the way back to the handle. Good ergos, 4 way clip and a well executed liner lock.

I've gifted a few Cara Cara's and Efficients over the years. Always get a positive response after they've been used.

I'm less inclined to buy Chinese knives from any brand the more I become aware of their approach to global economics, but the quality on all thrse models has never been a question for me.

TomAiello
Member
Posts: 3454
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Spyderco Value Knives

Postby TomAiello » Wed Dec 04, 2019 8:39 pm

BLUETYPEII wrote:
Wed Dec 04, 2019 7:13 pm
I’m wondering the same thing.

I’ve been tempted many a time by the Spyderco Resilience but I have just never pulled the trigger on one. I really enjoy large folders.

Does anyone know if there is a quality difference between Spyderco’s 8Cr13MoV and Byrd’s?
I've had really good experiences with Spyderco's 8CR. I have very little (and a fairly long time ago) experience with Byrds to compare, but I've definitely liked Spyderco's 8CR better than Kershaw's.

fanglekai
Member
Posts: 253
Joined: Wed May 01, 2013 10:53 am

Re: Spyderco Value Knives

Postby fanglekai » Wed Dec 04, 2019 8:57 pm

The Byrd Cara Cara 2 at around $20 is one of the best deals out there on a folder. Nice, thin stock. Secure lock. The two I bought were sharp out of the box. I gave one to a relative in Scouts. It seems to have served him well for the last year.

The $30 Bow River fixed blade is really nice. The leather sheath is well done too.

I have no problem with well heat treated 8Cr. Spyderco does a good job. It holds an edge just fine and sharpens easily. Its corrosion resistance is also pretty decent.

acer
Member
Posts: 81
Joined: Thu May 27, 2010 6:55 am

Re: Spyderco Value Knives

Postby acer » Wed Dec 04, 2019 9:43 pm

Well worth a look , try . To be honest I am quite partial to the Persistence . Go for it👍

User avatar
Enactive
Member
Posts: 544
Joined: Thu Dec 20, 2018 8:19 pm
Location: Wet side of Washington

Re: Spyderco Value Knives

Postby Enactive » Wed Dec 04, 2019 10:46 pm

My experience with my Resilience, Efficient, Bow River and Byrd Rescue have been excellent. All are 'merely' 8cr13mov- plenty good for most less-demanding tasks or for those happy to touch up frequently.

I still mostly prefer my mid and top-shelf Spydies, but find these value models, well... valuable.

I've intended to get an Emphasis, but haven't yet. I appreciate Ed Schempp's influences on the Efficient family, altho I don't totally love liner locks. In that regard, the Byrd backlocks appeal to me. Have also meant to get a Harrier, but have yet to do that either.

You should try out the designs that appeal to you (and/or gift recipients).

User avatar
BLUETYPEII
Member
Posts: 390
Joined: Tue Jul 31, 2018 1:02 pm
Location: Mesa Arizona

Re: Spyderco Value Knives

Postby BLUETYPEII » Wed Dec 04, 2019 11:39 pm

I Have a Cara Cara 2 but I need to Locktight the pivot because it keeps loosening and the clip screws won’t all tighten up. I have to say the ergonomics are even better with out the clip. It’s my go to when there is a potential for damage.

Own a Bow River also. It’s a beautiful well made knife. Honestly haven’t used it enough to do anything but a light touch up

I guess I should have phrased my question differently. Spyderco vs Byrd 8cr13mov...

is the steel sourced from the same place/factory?

Is the heat treat the same?

These may be trade secrets but if not I’m very curious to know if someone has knowledge on the subject.
:spyder: :spyder: 14 Spyderco in 7 different steels and 1 Byrd :spyder: :spyder:

VooDooChild
Member
Posts: 182
Joined: Wed Feb 21, 2018 1:29 am

Re: Spyderco Value Knives

Postby VooDooChild » Thu Dec 05, 2019 12:06 am

The bow river is a no brainer for 30 dollars. Its a Phil Wilson design, comes with a leather sheath, and the fit and finish on the handle was really good.

I just got a resilience and it impresses me for a budget knife. Its just good. Action is good, fit and finish is ok. I liked it out of the box which is really the only part that matters.

On the other hand I just got an emphasis and I liked it less out of the box compared to the resilience. The action doesnt feel as good, and the liner on one side isnt flush with the g10 or the backspacer at the butt of the handle. It is however a pretty good design so im letting this stuff slide.

If you want a cheaper knife they are fine. Just keep in mind at 3 times the price of a tenacious you are well into USA made g10 model territory. And they feel like they are easily over 3 times the quality.

User avatar
Pancake
Member
Posts: 341
Joined: Sat Jun 01, 2019 4:52 am

Re: Spyderco Value Knives

Postby Pancake » Thu Dec 05, 2019 12:53 am

I have Bow River and also a Waterway, and to be honest, there is not really 3 times better finish on Waterway. I paid around 50 € for Bow River and about 150 € for Waterway. Bow River has as good finish as you can get, plus sheath that you can throw on custom knife and noone will complain. Steel-wise, there is a big difference, handle is completely different, more process with Waterway handle, but the Bow River is really good.
I mean, Bow River impressed me more out of box then my Police 4 G10.
In the pocket: Chaparral FRN, Native Chief, Police 4 K390
On belt: Bow River, Waterway

Waiting for Stretched Stretch :D

User avatar
Vivi
Member
Posts: 6458
Joined: Mon Oct 29, 2007 8:15 am

Re: Spyderco Value Knives

Postby Vivi » Thu Dec 05, 2019 2:00 am

BLUETYPEII wrote:
Wed Dec 04, 2019 11:39 pm
I Have a Cara Cara 2 but I need to Locktight the pivot because it keeps loosening and the clip screws won’t all tighten up. I have to say the ergonomics are even better with out the clip. It’s my go to when there is a potential for damage.

Own a Bow River also. It’s a beautiful well made knife. Honestly haven’t used it enough to do anything but a light touch up

I guess I should have phrased my question differently. Spyderco vs Byrd 8cr13mov...

is the steel sourced from the same place/factory?

Is the heat treat the same?

These may be trade secrets but if not I’m very curious to know if someone has knowledge on the subject.
I've never noticed a performance difference between Spyderco 8Cr and Byrd 8Cr. I'm not Sal but I'd put $$ on them being the same steel from the same source with different holes cut into the blades.

User avatar
Larry_Mott
Member
Posts: 1898
Joined: Tue Jul 14, 2015 5:00 am
Location: Helsingborg, Sweden

Re: Spyderco Value Knives

Postby Larry_Mott » Thu Dec 05, 2019 2:37 am

I find them good value for the money. My favorite is the Byrd Raven 2 though.
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott R.I.P.

User avatar
justjohn
Member
Posts: 105
Joined: Sun Dec 10, 2017 7:46 pm
Location: North Carolina, USA, Earth

Re: Spyderco Value Knives

Postby justjohn » Thu Dec 05, 2019 8:02 am

Holy crap....thanks to all. I knew this form would provide true and honest reviews. There is only one thing left for me to do......BUY! :D
- John

:spyder: "Spyderco"....nuff said! :spyder:

User avatar
DSH007
Member
Posts: 289
Joined: Fri Mar 23, 2018 4:49 pm
Location: Merrimac, MA

Re: Spyderco Value Knives

Postby DSH007 » Thu Dec 05, 2019 9:04 am

I think the Spyderco value knives that I've handled are very well done. There is a lot to choose from in the price range, but I think the ergos and rock-solid construction on some of the Spyderco offerings.. Tenacious, Resilience, Efficient, etc.. set them apart from most of the competition. I carry them much less because I prefer more expensive models, but they are absolutely good to go as functional tools.. I keep them in my tool bag, car, etc as "beater" knives and they haven't let me down.

And the Bow River at $32 is just a no-brainer.. buy one!
Rick H.

..well, that escalated quickly..

User avatar
FullFlatMind
Member
Posts: 204
Joined: Fri May 31, 2019 9:40 am

Re: Spyderco Value Knives

Postby FullFlatMind » Thu Dec 05, 2019 9:27 am

The Tenacious, Persistence, etc. are great value folders. The Tenacious was my first Spyderco and it still sees some use. I will probably hand it down to my oldest son soon. 8Cr13Mov is a good, effective steel for normal use and is easy to sharpen.

The Bow River is a must, as others have stated. The price makes it hard to resist. It is an excellent kitchen, fishing, and camping knife.


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Albatross, Bing [Bot], Fright_Fox, Majestic-12 [Bot], ThomC and 29 guests