LC200N Dealer Exclusive

Discuss Spyderco's products and history.
User avatar
Dazen
Member
Posts: 116
Joined: Thu Jun 20, 2019 6:38 am

LC200N Dealer Exclusive

Postby Dazen » Fri Sep 13, 2019 10:49 am

Since we see so few knives done in LC200N, and we seem to not be able to get enough of them. I am making a plea to any dealer out there to start doing exclusives of this steel. We’ve seen a whole slew of non stainless, let’s go the extreme opposite way.

What do y’all think?

Dane

User avatar
JuPaul
Member
Posts: 413
Joined: Thu Jun 27, 2019 7:06 am

Re: LC200N Dealer Exclusive

Postby JuPaul » Fri Sep 13, 2019 10:52 am

Dazen wrote:
Fri Sep 13, 2019 10:49 am
Since we see so few knives done in LC200N, and we seem to not be able to get enough of them. I am making a plea to any dealer out there to start doing exclusives of this steel. We’ve seen a whole slew of non stainless, let’s go the extreme opposite way.

What do y’all think?

Dane
I'm on board! For starters I'd love a Kapara, a Smock, a manix, a delica...
Be excellent to each other. - Bill S. Preston, Esq.

Catamount123
Member
Posts: 257
Joined: Fri Dec 14, 2018 7:03 pm

Re: LC200N Dealer Exclusive

Postby Catamount123 » Fri Sep 13, 2019 10:59 am

The Native Chief and Kapara are the top two I'd like to see in LC200N.
I don't get people who only carry one knife :confused: ;)

User avatar
Mattysc42
Member
Posts: 136
Joined: Tue Aug 14, 2018 4:58 pm

Re: LC200N Dealer Exclusive

Postby Mattysc42 » Fri Sep 13, 2019 11:10 am

Take it a step further. Vanax SC exclusives!
Everyone is crazy in their own special ways. Good thing too! The world wouldn’t be nearly as interesting otherwise. ;)

Top 5 knives I’ve owned: Caribbean Leaf, Shaman, Manix XL, Native LW, Laconico Keen.
Top 5 steels I’ve owned: LC200N, MAXAMET, CPM S90V, ZDP-189, CPM M4.
Top 5 steels I want: CPM 20CV, K390, CPM 4V, VANAX, REX 45.

User avatar
wrdwrght
Member
Posts: 2685
Joined: Tue Mar 01, 2011 9:35 am
Location: New Hampshire

Re: LC200N Dealer Exclusive

Postby wrdwrght » Fri Sep 13, 2019 11:25 am

Mattysc42 wrote:
Fri Sep 13, 2019 11:10 am
Take it a step further. Vanax SC exclusives!
Has a dealer/distributor ever offered a steel that Spyderco did not first offer? I don’t know. Just wondering.
Marc

ON RADAR: “Crucarta” Shaman sprint; Stretch2 straight-spine sprint; Siren; Maxamet PM2; Enuff Salt sheepsfoot; Roadie. IN DREAMS: K390 Military2 stop-lock; 4V Native Chief; Slysz Swayback; Anso Rock Lobster; Nishijin “R”; C27 serrated Jess Horn.

User avatar
Mattysc42
Member
Posts: 136
Joined: Tue Aug 14, 2018 4:58 pm

Re: LC200N Dealer Exclusive

Postby Mattysc42 » Fri Sep 13, 2019 11:30 am

Dunno. 4v, M390, or CPM Cruwear maybe? Not sure if there was anything in any of them prior to exclusives.
Everyone is crazy in their own special ways. Good thing too! The world wouldn’t be nearly as interesting otherwise. ;)

Top 5 knives I’ve owned: Caribbean Leaf, Shaman, Manix XL, Native LW, Laconico Keen.
Top 5 steels I’ve owned: LC200N, MAXAMET, CPM S90V, ZDP-189, CPM M4.
Top 5 steels I want: CPM 20CV, K390, CPM 4V, VANAX, REX 45.

User avatar
steelcity16
Member
Posts: 2884
Joined: Mon Dec 11, 2017 11:34 am

Re: LC200N Dealer Exclusive

Postby steelcity16 » Fri Sep 13, 2019 12:23 pm

Chap LW Salt with TiCN coated LC200N and Toxic Green FRN scales! :)
:spyder: Enjoys long walks on the beach with rustproof lightweight folding knives. Must love Boye Dents and deep carry wire clips. :spyder:

User avatar
abbazaba
Member
Posts: 2849
Joined: Mon Nov 09, 2015 3:40 pm
Location: New England

Re: LC200N Dealer Exclusive

Postby abbazaba » Fri Sep 13, 2019 1:04 pm

A dealer told me that LC200n wasn't a steel that Spyderco offered for exclusives.

User avatar
Dazen
Member
Posts: 116
Joined: Thu Jun 20, 2019 6:38 am

Re: LC200N Dealer Exclusive

Postby Dazen » Fri Sep 13, 2019 1:04 pm

Mattysc42 wrote:
Fri Sep 13, 2019 11:10 am
Take it a step further. Vanax SC exclusives!
That would be amazing, but I’m trying to start small.

Any comp lock in LC200N would be first on my list.

And i would think it would have to be g10, CF or TI so they do not compete with the salt frn line.

User avatar
Dazen
Member
Posts: 116
Joined: Thu Jun 20, 2019 6:38 am

Re: LC200N Dealer Exclusive

Postby Dazen » Fri Sep 13, 2019 1:06 pm

abbazaba wrote:
Fri Sep 13, 2019 1:04 pm
A dealer told me that LC200n wasn't a steel that Spyderco offered for exclusives.
Exactly the reason for this thread, let’s change that PLEASE!

User avatar
JuPaul
Member
Posts: 413
Joined: Thu Jun 27, 2019 7:06 am

Re: LC200N Dealer Exclusive

Postby JuPaul » Fri Sep 13, 2019 1:07 pm

abbazaba wrote:
Fri Sep 13, 2019 1:04 pm
A dealer told me that LC200n wasn't a steel that Spyderco offered for exclusives.
That is a bummer! But hopefully it's because they're planning a lot more production models of their own.
Be excellent to each other. - Bill S. Preston, Esq.

User avatar
JuPaul
Member
Posts: 413
Joined: Thu Jun 27, 2019 7:06 am

Re: LC200N Dealer Exclusive

Postby JuPaul » Fri Sep 13, 2019 1:14 pm

wrdwrght wrote:
Fri Sep 13, 2019 11:25 am
Mattysc42 wrote:
Fri Sep 13, 2019 11:10 am
Take it a step further. Vanax SC exclusives!
Has a dealer/distributor ever offered a steel that Spyderco did not first offer? I don’t know. Just wondering.
Spyderco hadn't made a cruwear delica before, for example. I also don't think they'd offered an s30v dragonfly before. Both were distributor exclusives this summer, but the steels themselves weren't new to spyderco, of course. 4v...hmm...did St. Nick's start ordering this before spyderco had the Province in the works?

Edit: Or was the Fradon manix the first 4v spyderco released? Can't think of any other production knives in 4v, but my knowledge of spydie history is definitely limited.
Be excellent to each other. - Bill S. Preston, Esq.

User avatar
steelcity16
Member
Posts: 2884
Joined: Mon Dec 11, 2017 11:34 am

Re: LC200N Dealer Exclusive

Postby steelcity16 » Fri Sep 13, 2019 1:34 pm

They did the Never Summer Native in LC200N, and I am not sure it that was a full Salt (stainless everything) or not. And the Abel Reels Natives are LC200N as well. So maybe they will do a sprint of an existing LC200N Knife in a different format. Like a Carribean with non-ugly scales?? ;)
:spyder: Enjoys long walks on the beach with rustproof lightweight folding knives. Must love Boye Dents and deep carry wire clips. :spyder:

User avatar
tonijedi
Member
Posts: 522
Joined: Wed Oct 03, 2012 10:08 am
Location: Portugal

Re: LC200N Dealer Exclusive

Postby tonijedi » Fri Sep 13, 2019 2:49 pm

Please keep it available for all of us, including me that live in the EU.

User avatar
T_MAC686
Member
Posts: 277
Joined: Thu Jan 12, 2017 7:31 pm

Re: LC200N Dealer Exclusive

Postby T_MAC686 » Fri Sep 13, 2019 2:59 pm

I would like to see the Air, Dragonfly, and Chap come in LC200N

SF Native
Member
Posts: 1232
Joined: Wed Aug 10, 2016 8:25 am
Location: Fairfax, Ca

Re: LC200N Dealer Exclusive

Postby SF Native » Fri Sep 13, 2019 3:02 pm

Mattysc42 wrote:
Fri Sep 13, 2019 11:30 am
Dunno. 4v, M390, or CPM Cruwear maybe? Not sure if there was anything in any of them prior to exclusives.
Pretty sure the mules were first in almost all the steels except lc200n. I think the tusk was first for that one. The mule and never summer came later.

User avatar
Mattysc42
Member
Posts: 136
Joined: Tue Aug 14, 2018 4:58 pm

Re: LC200N Dealer Exclusive

Postby Mattysc42 » Fri Sep 13, 2019 10:05 pm

From what I’ve heard, there wasn’t a CPM Cruwear mule; it was non powdered cruwear. I could be wrong though.
Everyone is crazy in their own special ways. Good thing too! The world wouldn’t be nearly as interesting otherwise. ;)

Top 5 knives I’ve owned: Caribbean Leaf, Shaman, Manix XL, Native LW, Laconico Keen.
Top 5 steels I’ve owned: LC200N, MAXAMET, CPM S90V, ZDP-189, CPM M4.
Top 5 steels I want: CPM 20CV, K390, CPM 4V, VANAX, REX 45.

User avatar
Doc Dan
Member
Posts: 7261
Joined: Thu Nov 08, 2012 4:25 am
Location: In a dimension as vast as space and as timeless as infinity.

Re: LC200N Dealer Exclusive

Postby Doc Dan » Fri Sep 13, 2019 11:05 pm

Manix 2 LW and Lil Native back lock in LC200N and all around salt would have me robbing my piggy bank.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)

"Until we meet again, may the good Lord take a liking to you."
(Roy Rogers)


NRA Life Member
Spydernation 0050

SF Native
Member
Posts: 1232
Joined: Wed Aug 10, 2016 8:25 am
Location: Fairfax, Ca

Re: LC200N Dealer Exclusive

Postby SF Native » Sat Sep 14, 2019 1:04 am

Mattysc42 wrote:
Fri Sep 13, 2019 10:05 pm
From what I’ve heard, there wasn’t a CPM Cruwear mule; it was non powdered cruwear. I could be wrong though.
That might be right. It’s not listed as cpm on the wiki page. It also says the mules were recalled for poor heat treat.
Of course they didn’t do a 10v mule and went right to the K2.

http://www.spydiewiki.com/index.php?title=MT_Mule_Team

Notsurewhy
Member
Posts: 67
Joined: Mon Feb 04, 2019 7:57 pm

Re: LC200N Dealer Exclusive

Postby Notsurewhy » Sat Sep 14, 2019 1:50 am

Just posted in the other thread, but in the new product reveal section, the Spyderco app lists a new folder called the siren in lc200n from Lance Clinton. Rough texture g10 3.6 in blade made in Golden backlock. No pictures yet but might be similar to the waterway?


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], koenigsegg, legOFwhat?, PayneTrain, zippifish and 36 guests