H1 SE Tatanka LW Salt Anyone???
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
H1 SE Tatanka LW Salt Anyone???
I just want a massive hunk of serrated H1 to swing around!! :D With how popular and legendary the Pacific Salt is, I would think there would be a market for some larger H1 Salt blades like a Police LW Salt and a Tatanka LW Salt. I don't really have a desire for the non-salt G10 versions of these knives, but I would buy H1 SE LW Salt versions of both in a heartbeat!
Anyone else?? I know Vivi is on board!!
Anyone else?? I know Vivi is on board!!
Last edited by steelcity16 on Sun Jun 02, 2019 8:42 pm, edited 1 time in total.
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
-
- Member
- Posts: 5858
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: H1 SE Tatanka LW Salt Anyone???
You should get the Whale Rescue blade and mount it on a two-handed shaft.
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
- NickShabazz
- Member
- Posts: 254
- Joined: Mon Aug 22, 2016 8:48 am
- Contact:
Re: H1 SE Tatanka LW Salt Anyone???
I'm curious: Now that LC200N is a thing in the Salt line, and has been shown to be basically rustproof, with substantially better edge-holding, why would you ask for H1 here?
My current feeling is that I, for one, welcome our LC200N overlords, and I hope quite strongly that it comes to replace H1 throughout the Salt lineup. And, frankly, just gets used more in general.
My current feeling is that I, for one, welcome our LC200N overlords, and I hope quite strongly that it comes to replace H1 throughout the Salt lineup. And, frankly, just gets used more in general.
Mourning the Slysz Bowie and loving the rest of Spyderco's gems. Check out my reviews at https://www.youtube.com/c/nickshabazz!
-
- Member
- Posts: 5858
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: H1 SE Tatanka LW Salt Anyone???
NickShabazz wrote: ↑Sun Jun 02, 2019 7:47 pmI'm curious: Now that LC200N is a thing in the Salt line, and has been shown to be basically rustproof, with substantially better edge-holding, why would you ask for H1 here?
My current feeling is that I, for one, welcome our LC200N overlords, and I hope quite strongly that it comes to replace H1 throughout the Salt lineup. And, frankly, just gets used more in general.
Does LC200N beat H-1 for SE? That is the question.
I agree, I'd love to see more LC200N Salts come out. I'm looking forward to the LC200N Pacific Salt, if and when.
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: H1 SE Tatanka LW Salt Anyone???
The Meat man wrote: ↑Sun Jun 02, 2019 7:57 pmNickShabazz wrote: ↑Sun Jun 02, 2019 7:47 pm
I'm curious: Now that LC200N is a thing in the Salt line, and has been shown to be basically rustproof, with substantially better edge-holding, why would you ask for H1 here?
My current feeling is that I, for one, welcome our LC200N overlords, and I hope quite strongly that it comes to replace H1 throughout the Salt lineup. And, frankly, just gets used more in general.
Does LC200N beat H-1 for SE? That is the question.
Exactly. H1 is the undisputed king of serrated edges as far as I am concerned until I have the new LC200N SE Pacific Salt for an apples to apples comparison against my legendary H1 SE Pacific Salt. I haven't seen any real comparisons of H1 SE vs LC200N SE yet. I love my H1 SE blades so until I see evidence that LC200N is an improvement upon H1 in serrated edge, I will continue to ask for and purchase the H1 SE blades. I would love to pit a FFG LC200N SE Spyderhawk against my H1 SE Spyderhawk as well!
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
-
- Member
- Posts: 87
- Joined: Thu Nov 29, 2018 12:25 am
Re: H1 SE Tatanka LW Salt Anyone???
I hadn't even considered a Tatanka Salt. I would certainly be interested. While we're throwing out idea's, how about a Tatanka based hawkbill the SpyderRaptor?
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: H1 SE Tatanka LW Salt Anyone???
SaltSerious wrote: ↑Sun Jun 02, 2019 10:27 pm
While we're throwing out idea's, how about a Tatanka based hawkbill the SpyderRaptor?
:eek: i would be all over that. I love my Spyderhawk and recently purchased a backup. I've been wanting a Spyderhawk XL as well as a Fixed Blade Spyderhawk XL.
This was earlier today..
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
-
- Member
- Posts: 87
- Joined: Thu Nov 29, 2018 12:25 am
Re: H1 SE Tatanka LW Salt Anyone???
Fellow Spyderhawk brother,steelcity16 wrote: ↑Sun Jun 02, 2019 10:35 pmSaltSerious wrote: ↑Sun Jun 02, 2019 10:27 pm
While we're throwing out idea's, how about a Tatanka based hawkbill the SpyderRaptor?
:eek: i would be all over that. I love my Spyderhawk and recently purchased a backup. I've been wanting a Spyderhawk XL as well as a Fixed Blade Spyderhawk XL.
This was earlier today..
that's a nice shot.
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: H1 SE Tatanka LW Salt Anyone???
Thanks! I just ordered a Tasman Salt 1 and a Dfly Salt Hawkbill at a good price from eBay last night as well. So I have my smaller Hawks covered...now we just need some Sal to make us some XL and XXL H1 SE Hawkbill Salt LW folders! :)
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
Re: H1 SE Tatanka LW Salt Anyone???
Base it off the catcherman if you really want this to happen. The molds are already made. Just have to fit a hawkbill blade in there. Otherwise you can do like I did and put a tip on a whale rescue model. Sure if you spent a little time with it you could turn it into a folder. Use a pin to lock it open and then you could use the same pin to lock it closed.
-
- Member
- Posts: 87
- Joined: Thu Nov 29, 2018 12:25 am
Re: H1 SE Tatanka LW Salt Anyone???
Steelcity, wondering if this would be made with the powerlock or regular lockback since it would be a LW variant. Really hope this knife is produced.
-
- Member
- Posts: 326
- Joined: Sat Jun 16, 2018 12:56 pm
Re: H1 SE Tatanka LW Salt Anyone???
I'd like to see any variation of the Tatanka. The original was amazing. I think it may have been a little big for most people or it would still be in production though.
Re: H1 SE Tatanka LW Salt Anyone???
Have you heard about the hardness of the serrations on H1 knives? It's a mixed bag but most people seem to be very happy with the edge retention.NickShabazz wrote: ↑Sun Jun 02, 2019 7:47 pmI'm curious: Now that LC200N is a thing in the Salt line, and has been shown to be basically rustproof, with substantially better edge-holding, why would you ask for H1 here?
My current feeling is that I, for one, welcome our LC200N overlords, and I hope quite strongly that it comes to replace H1 throughout the Salt lineup. And, frankly, just gets used more in general.
This would be the ultimate rope cutter! I'd be in!
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Re: H1 SE Tatanka LW Salt Anyone???
steelcity16 wrote: I just want a massive hunk of serrated H1 to swing around!! :D With how popular and legendary the Pacific Salt is, I would think there would be a market for some larger H1 Salt blades like a Police LW Salt and a Tatanka LW Salt. I don't really have a desire for the non-salt G10 versions of these knives, but I would buy H1 SE LW Salt versions of both in a heartbeat!
Anyone else?? I know Vivi is on board!!
I could be wrong but, unless FRN molds have dropped dramatically from the $30,000+ range in the last 10 years, I suspect the chances of seeing a lightweight version of a niche model like the Tatanka are on par with those of it snowing here in SC tomorrow. Now, perhaps you meant it some other way, but in Spyderco parlance knives with "lightweight" in their description have FRN handles. Spyderco might be able to do a Tatanka with an unlined CF or G10 handle, but I think that's as close to a lightweight as you're going to get.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
-
- Member
- Posts: 87
- Joined: Thu Nov 29, 2018 12:25 am
Re: H1 SE Tatanka LW Salt Anyone???
G-10 SE H1 Salt Tantanka, I'll take half a dozen. Let's make this happen.The Deacon wrote: ↑Fri Aug 09, 2019 11:17 amsteelcity16 wrote: I just want a massive hunk of serrated H1 to swing around!! :D With how popular and legendary the Pacific Salt is, I would think there would be a market for some larger H1 Salt blades like a Police LW Salt and a Tatanka LW Salt. I don't really have a desire for the non-salt G10 versions of these knives, but I would buy H1 SE LW Salt versions of both in a heartbeat!
Anyone else?? I know Vivi is on board!!
I could be wrong but, unless FRN molds have dropped dramatically from the $30,000+ range in the last 10 years, I suspect the chances of seeing a lightweight version of a niche model like the Tatanka are on par with those of it snowing here in SC tomorrow. Now, perhaps you meant it some other way, but in Spyderco parlance knives with "lightweight" in their description have FRN handles. Spyderco might be able to do a Tatanka with an unlined CF or G10 handle, but I think that's as close to a lightweight as you're going to get.
Re: H1 SE Tatanka LW Salt Anyone???
I don’t think FRN scales would make the Tatanka anything like LW.
-Marc (pocketing an S30V Military2 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
Re: H1 SE Tatanka LW Salt Anyone???
Have you checked out the G Sakai H1 knives?steelcity16 wrote: ↑Sun Jun 02, 2019 10:35 pmSaltSerious wrote: ↑Sun Jun 02, 2019 10:27 pm
While we're throwing out idea's, how about a Tatanka based hawkbill the SpyderRaptor?
:eek: i would be all over that. I love my Spyderhawk and recently purchased a backup. I've been wanting a Spyderhawk XL as well as a Fixed Blade Spyderhawk XL.
Re: H1 SE Tatanka LW Salt Anyone???
Asking for a LW version of the Tatanka is just silly. Even as is, I feel the liners on my Tatanka are on the thin side. For actual use, that is. It's too large for my pockets anyways, so it's carried in a sheath.
Now make me one with CPM Cruwear and thicker liners, and I would buy a couple :) Or as is, with CPM S110V blade for rust resistance, that would be cool as well.
Roland.
Now make me one with CPM Cruwear and thicker liners, and I would buy a couple :) Or as is, with CPM S110V blade for rust resistance, that would be cool as well.
Roland.
Re: H1 SE Tatanka LW Salt Anyone???
Nice.
Last edited by Monty on Wed Nov 13, 2019 11:57 pm, edited 2 times in total.
Re: H1 SE Tatanka LW Salt Anyone???
oops double post... enjoy your weekend everyone