Page 2 of 8
Re: DLC 20CV PM2?
Posted: Fri May 24, 2019 4:17 pm
by steelcity16
JonLeBlanc wrote: ↑Fri May 24, 2019 3:15 pm
husq2100 wrote: ↑Fri May 24, 2019 3:06 am
Im also guessing it wont be too long before we possibly see the St Nicks DLC 4v Red PM2 and the REC version of their famous Para 3 in PM2 but with a different steel. Thats not to mention the return at some point of the Maxamet versions... Then of course the doors for a salt are a little more open due to the early success of the Para 3 light weight.
I dont earn enough dough.... DOH!
An REC PM2 would sell out in record time I think... And I'd probably be one of them lol. I really liked the color scheme, but despite it's compactness the Para3 isn't as practical in size for me as the Military/PM2; currently I only have the 52100 Para3. A PM2 REC exclusive would sure be a hit though!
I'm sure they will do the PM2. I'd really like that one in a Para 3 LW! I'll take the St Nick's DLC 4V in a Red Para 3 LW while we are at it! :) And I guess DLT might as well do this one in a Para 3 LW as well! Put me down for one of each!
Re: DLC 20CV PM2?
Posted: Fri May 24, 2019 6:13 pm
by SF Native
I’m pretty much done buying pm2’s. But that is a very nice looking knife. I would like that in a para3. Dlc and all.
Re: DLC 20CV PM2?
Posted: Fri May 24, 2019 6:58 pm
by TomAiello
If they do a DLC Manix in 20cv, I might have go get one, even though I don't usually dig DLC on stainless steels. I've been carrying my m390 PM2 a lot lately (since I discovered the Aramis scales) but I think I'll probably skip this DLC version.
Re: DLC 20CV PM2?
Posted: Sat May 25, 2019 7:48 pm
by Bill1170
Soup wrote: ↑Thu May 23, 2019 11:10 pm
It should be easy to dye these scales just about any color desired. I have the satin version and have been planning a day to dye, but can't decide on a color yet.
As the Klingons say, “Today is a good day to dye.”
Re: DLC 20CV PM2?
Posted: Sat May 25, 2019 8:59 pm
by crazywednesday
steelcity16 wrote: ↑Fri May 24, 2019 4:17 pm
JonLeBlanc wrote: ↑Fri May 24, 2019 3:15 pm
husq2100 wrote: ↑Fri May 24, 2019 3:06 am
Im also guessing it wont be too long before we possibly see the St Nicks DLC 4v Red PM2 and the REC version of their famous Para 3 in PM2 but with a different steel. Thats not to mention the return at some point of the Maxamet versions... Then of course the doors for a salt are a little more open due to the early success of the Para 3 light weight.
I dont earn enough dough.... DOH!
An REC PM2 would sell out in record time I think... And I'd probably be one of them lol. I really liked the color scheme, but despite it's compactness the Para3 isn't as practical in size for me as the Military/PM2; currently I only have the 52100 Para3. A PM2 REC exclusive would sure be a hit though!
I'm sure they will do the PM2. I'd really like that one in a Para 3 LW! I'll take the St Nick's DLC 4V in a Red Para 3 LW while we are at it! :) And I guess DLT might as well do this one in a Para 3 LW as well! Put me down for one of each!
Make mine a manix 2!
Re: DLC 20CV PM2?
Posted: Sun May 26, 2019 7:16 am
by 5pins
Re: DLC 20CV PM2?
Posted: Tue May 28, 2019 4:41 pm
by 5pins
DLT's Instagram is showing both a DLC coating and uncoated blade. :confused:
Re: DLC 20CV PM2?
Posted: Tue May 28, 2019 4:54 pm
by Sharp Guy
5pins wrote: ↑Tue May 28, 2019 4:41 pm
DLT's Instagram is showing both a DLC coating and uncoated blade. :confused:
I saw that and assumed they were showing the previous exclusive behind their new one
Re: DLC 20CV PM2?
Posted: Tue May 28, 2019 5:46 pm
by 5pins
Sharp Guy wrote: ↑Tue May 28, 2019 4:54 pm
I saw that and assumed they were showing the previous exclusive behind their new one
I didn't realize they had released an uncoated one in the past. I asked them on IG and they confirmed that is was a previous model and would not be made again.
Re: DLC 20CV PM2?
Posted: Tue May 28, 2019 10:24 pm
by ihped1
How quickly will this sell? Will I be able to buy one after work or do I need to buy quick?
Re: DLC 20CV PM2?
Posted: Tue May 28, 2019 10:39 pm
by steelcity16
ihped1 wrote: ↑Tue May 28, 2019 10:24 pm
How quickly will this sell? Will I be able to buy one after work or do I need to buy quick?
Its always a crap shoot, but PM2s and Para 3s from places like BHQ and DLT are typically going to go in record time. I'm guessing under 10 minutes. Popular steel, good colors, collectors, flippers, etc. Take a bathroom break at work and buy it on your phone right at Noon. Only way to guarantee you will get one.
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 5:45 am
by TkoK83Spy
steelcity16 wrote: ↑Tue May 28, 2019 10:39 pm
ihped1 wrote: ↑Tue May 28, 2019 10:24 pm
How quickly will this sell? Will I be able to buy one after work or do I need to buy quick?
Its always a crap shoot, but PM2s and Para 3s from places like BHQ and DLT are typically going to go in record time. I'm guessing under 10 minutes. Popular steel, good colors, collectors, flippers, etc. Take a bathroom break at work and buy it on your phone right at Noon. Only way to guarantee you will get one.
Yep, I think that's the only way to go here. I believe the satin blade version of this knife and their Manix 2 CV20 both went in under 10 minutes. DLT is great, such great looking exclusives at fantastic prices!
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 6:46 am
by 5pins
You just never know. Last year I got BHQ Para 3 M4 satin blade jade G10 and it was available for about a week or two IIRC. The coated blade went in a few hours I think. The point is, you just never know.
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 8:59 am
by steelcity16
Going to pass on this one on second thought. I am moving more and more toward carrying LWs exclusively anymore. Going to keep my powder dry in case the BBS M390 Exclusive is something like an FRN Dragonfly or Delica. Also need to have funds in case some of those Para 3 LWs start dropping.
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 10:04 am
by Doeswhateveraspidercan
Just ordered 2 and received confirmation. Folks you had better order now their servers are running slow with all the hits. This one is going to sell out fast I can tell just by how slow their site is running. Good Luck :spyder:
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 10:05 am
by Wright.88
Already listed as OOS. Wow.
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 10:05 am
by 5pins
Sold out in less then 4 min.
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 10:06 am
by rbb2
Well, got mine. I would have preferred the satin one, but missed that by a few minutes. Looks like this one sold out in about 5 minutes, maybe 6, as they're gone now.
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 10:06 am
by Doeswhateveraspidercan
WOW!!!
Re: DLC 20CV PM2?
Posted: Wed May 29, 2019 10:07 am
by gigem95
Wow, glad I got one. Looking forward to receiving it.