Spyderco Forums

I’m thinking an Endura that has LC200N blade & liners with a black & yellow zome handle to make it look unique.

I would buy that in a second, maybe buy two.

Spyderhawk XL and XXL. Same Orange FRN handle and SE H1 blade. But bigger, and much bigger! These are the ultimate yard work tools. I would maybe make the blade curve slightly less pronounced on the XL and even less pronounced on the XXL. A big fixed blade Spyderhawk XL in H1 SE would be welcome as well.

While I carry my Native LWs daily, my Spyderhawk has probably seen more use in the last few weeks than anything with all of the yard work I have been doing. I need to grab a few more while they are still available. If you don't have one and you do yard work on a regular basis, I would definitely recommend grabbing one while you can. When I am outside I always have the Spyderhawk in one pocket and my SE Pacific Salt in the other. Best one two punch out there! :)

Can we a get a new "R"?

That would be fantastic.

And for those who don't own one:
trust me - you want one of these. :)
C

^^ yeah I think I do. Laminated blade? V-toku2?

^^^
Nishijin scales, or Black Micarta.
Solid Super Blue, ZDP, Hap 40, Vtoku.
Anything.
C

updated list for 2019

1. More Grey/Cruwear and Teal/S30V exclusives
2. Toxic Green LC200N Salts of the Pacific Salt (PE/SE/CE), Salt 2 (PE/SE/CE), Dragonfly Salt (PE/SE), Catcherman (SE/CE/PE), and Spyderhawk (SE), Police LW Salt (PE/SE/CE). TiCN variations of these would be awesome paired with the Toxic Green FRN. :D
3. FRN Worker LW Salt (PE/SE/CE)
4. More Dragonfly blade shape variants such the Dodofly, Workerfly, and Reverse S Dragonfly
5. Cricket 2 LW with Reverse S blade, bidirectional FRN on both scale sides, and wire clip
6. New waved CE and SE Delicas and Enduras, preferably TiCN coated with Foliage Green or OD Green FRN.
7. New sprint/exclusive series of White FRN and TiCN coated steel like Cruwear, K390, M390, or any other new un-laminated imported blade steel
8. Dark Red FRN with TiCN coated 4V or V4E from St Nicks in the Delica, Dragonfly, Jester, etc
9. more TiCN coated blades in general...like a blacked out Dragonfly Salt
10. Jesters, Jesters, and more Jesters! Still hoping for a Jester Salt with Glow in the Dark FRN
11. A choil-less FRN backlock with as similar size, blade shape, and ergos as possible to the Tenacious. This done in the Cruwear exclusive and an LC200N would be probably my most carried knives.

These threads are fun.

1. Pacific Salt XL. 4.25-4.5" blade.

2. OD Green handled DLC Pacific Salts.

3. Calypso lightweight with screw construction.

4. Perrin Street Beat & Street Bowie in DLC 3V with OD green micarta.

5. Endura 5 (Handle is shaped like a Cara Cara 2 with better contouring on the edges, Endura 3 style tip, no liners for us weight weenies, Ti standard production model for the liner guys, sprints in all sorts of fun steels, PE CE and SE options)

6. H1 Catcherman DLC black handles with a re-designed metal clip, full SE

7. Police 4 lightweight Salt, PE LC200N & SE H1.

Starmate in laminated Hitachi White with a higher HRC

Centofante 3 with ZDP189
Centofante Memory with natural Ti scales
D’Allara 3 back lock
A drop point in a Harpy shaped handle - much prefer the ergos to the Delica frame

- Endela with blade as handle filling as possible
- Endela in HAP40 and/or S30V
- Endura in S30V
- Endura SE ffg
- Stretch 1 ("one") re-run with 2 or 2.5 mm bladestock
- Endura, Endela, Delica maximum-edge-length-editions (no ricasso, edge all the way back to the handle (would require a stop pin), blade as handle filling as possible)

... added to my post above:

- Stretch-like, but choil-less blade on a Caribbean-like handle (still backlock of course)

Wartstein wrote: ↑

Fri Aug 16, 2019 12:58 am

Endura, Endela, Delica maximum-edge-length-editions (no ricasso, edge all the way back to the handle (would require a stop pin), blade as handle filling as possible)

+1!

Adding a Cruwear Micarta (Delica/Dragonfly/Endura/Jester) series to my Seki wish list. If they can make a series like this in Pakkawood, then hopefully Micarta is on the table soon. And with Cruwear now available as an option in Seki... :D This would be an awesome series for a dealer or distributor to start!

1. Return of the Waved combo edge delica and endura (add Endela too)
2. waved Tasman Salt 2
3. Endura in H1/LC200N
3. G10 scale build/swap kits for the main Japanese FRN models

4. My never going to happen but hey it's a wish list knife... Waved H1/LC200N Endura, larger Salt spydiehole, Khaki brown G10 Scales, combo edge with the serrations in the middle third of the blade, and lets throw in a deep carry brown coated clip while I'm dreaming

Monty wrote: ↑

Fri Aug 16, 2019 12:43 pm

1. Return of the Waved combo edge delica and endura (add Endela too)

I can't believe that these don't sell well enough to not be in the current lineup. I think they should make waved versions of the current Foliage Green and Black/Black Combo Edged Delica and Endura. Someone should at the minimum run an exclusive with TiCN coated waved combo edge blades and Foliage or OD Green or Tan FRN scales. This is really my #1 wish out of Seki as I am really liking my Waved Dfly and now want a Waved Delica, but in Combo Edge.

abbazaba wrote: ↑

Thu Aug 02, 2018 11:37 am

Full sprint run of K390.

Update for 2019:

Full sprint run of K390 :D

I'm surprised it's been two years since we've seen any, despite it receiving universal praise as much or more so than other non-stainless high performance steels.

Toxic Green FRN TiCN coated LC200N FFG Waved Delica Salt and Endura Salt. So pointer tips than the Salt 2 and Pacific Salt.

Blue Dragonfly

Since wharncliffes seem to be incredibly popular right now, maybe a Sprint run of the Centofante 4.