Review: original Rescue vs modern Endura

Discuss Spyderco's products and history.
User avatar
embry386
Member
Posts: 471
Joined: Wed Jun 14, 2017 10:17 pm

Review: original Rescue vs modern Endura

#1

Post by embry386 »

I recently purchased an original Spyderco Rescue from eBay. It looks like this:

Image
(beautiful knife)

I love it very much and thought I'd post a review, using the Endura for comparison because that's a knife that most of y'all are familiar with.

Image

It's nearly the same length as the Endura, but feels much smaller. This is because it's much lighter; there are no metal liners in the handle. Also the lockbar is nearly an inch shorter and the handle is slimmer. It's less overbuilt than the Endura and feels kind of delicate if you're used to the Endura. I know that the Rescue was built to be used and that the FRN is tough and I haven't ever heard of anyone accidentally snapping it, so with time I'll probably get over the instinct to baby this thing -- but dang, it sure triggers that instinct. I love how lightweight it is though. Anyway, if worst comes to worst and I do manage to snap it, eBay will sell me another one anytime I want (they're about $40) and it'd give me an excuse to buy the cool yellow-handled version.

Image
(demo of the length of the lockbars)

Fit and finish on the Rescue are great. When I got my Endura, I had to take sandpaper to it to make the FRN edges match up, and to keep the metal edges from being uncomfortably sharp around the Spydiehole and the Boye dent. The Rescue has no such issues. Granted, that may be because it's a used knife, and the previous owner could've done something about it, but I doubt it; it doesn't show any signs of having been sandpapered.

The action is much less stiff on the Rescue, probably because it's been used way more, but still plenty strong enough to hold the knife closed in my pocket. The difference is that I can open the Rescue by holding it by the handle and flicking my wrist to get the centrifugal force to pull the blade out, and I can't do that with my Endura. Action on the Rescue is also very smooth, kind of amazing for a knife that's older than I am and has its insides full of grime (couldn't get a photo, but hoo boy it is there). Lockup is perfect, which is also impressive, considering that it does not look like the previous owner was gentle to the knife. There's a very slight wobble if I really try to rock the blade, but it's not enough to bother me, and doesn't hinder using the knife. The Endura is better in this area and has zero wobble and a lockup like a bear trap.

Plastic clip on the Rescue is more comfortable in hand than the metal of the Endura. The entire knife is more rounded and comfortable than the Endura, and the ergos work better with my hands. I have very small hands, and the grooves of the Endura handle don't quite line up the way I'd like, although it's not uncomfortable to hold by any stretch of the imagination. Unfortunately, this plastic clip does nothing to actually hold the knife where you put it. If you clip it to your pocket and then hang upside down, the knife will fall out. Also the clip flexes easily under pressure, and would probably snap off if you yanked on it too hard at the wrong angle. This was back in the early days of Spyderco, when putting a clip on a knife was still a new and revolutionary concept, and they were still kind of refining the implementation I guess. Fun fact for anyone who doesn't know: Spyderco was actually the company who first came up with the idea of putting a clip on a knife, and their patent for the idea hadn't expired yet when this knife was manufactured. That's why it says this on it:

Image
(if the photo's too hard to read on your screen, the clip says "US AND FOREIGN PATENTS")

I am super happy with my purchase of this cool old knife. 10/10 would buy again. Now all I gotta do is find someone local who I trust to sharpen the serrations...
User avatar
Jazz
Member
Posts: 7678
Joined: Sun Jul 01, 2007 7:46 pm
Location: Alberta, Canada

Re: Review: original Rescue vs modern Endura

#2

Post by Jazz »

Nice knife and review. :cool:
- best wishes, Jazz.
User avatar
JonLeBlanc
Member
Posts: 1756
Joined: Sun May 13, 2018 8:00 am
Location: Louisiana

Re: Review: original Rescue vs modern Endura

#3

Post by JonLeBlanc »

Embry386; it looks like you have a patina on your VG10 Endura, is that the case? If so, how’d that happen may I ask?
My collection so far: 52100 Military (2); 52100 PM2 (2); 52100 Para3; Stretch2 V-Toku; KnifeWorks M4 PM2; BentoBox M390 PM2; BentoBox S90V Military; Police4 K390; S110V PM2; SS Delica AUS-6; Wayne Goddard Sprint VG-10
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
SG89
Member
Posts: 10665
Joined: Fri Jul 17, 2015 12:42 pm

Re: Review: original Rescue vs modern Endura

#4

Post by SG89 »

any chance you would use a sharpmaker to sharpen the serrations? if i can successfully use a sharpmaker to sharpen knives anyone can
User avatar
embry386
Member
Posts: 471
Joined: Wed Jun 14, 2017 10:17 pm

Re: Review: original Rescue vs modern Endura

#5

Post by embry386 »

Jazz wrote:
Thu Jul 26, 2018 4:07 pm
Nice knife and review. :cool:
Thank you! :spyder:

JonLeBlanc wrote:
Thu Jul 26, 2018 6:01 pm
Embry386; it looks like you have a patina on your VG10 Endura, is that the case? If so, how’d that happen may I ask?
That is not the case; the blade did discolor after cutting some fruit and not cleaning it properly, but when I got around to giving it a good scrubdown in the sink the discoloring went mostly away. I just checked it and can't see any patina, although the light in here isn't good right now.

Spydergirl88 wrote:
Thu Jul 26, 2018 7:11 pm
any chance you would use a sharpmaker to sharpen the serrations? if i can successfully use a sharpmaker to sharpen knives anyone can
Eventually, I'd love to have a Sharpmaker and learn how to use it! I currently don't own one though, and am low on cash and anyway have many other things in my life demanding my attention which all are a higher priority than obtaining tools and learning how to sharpen my knives. For now, I'm just looking for a quick, low-effort way to get my knife back to a nice edge. :) Thank you for the encouragement though -- using a sharpener properly on a serrated edge looks kind of intimidatingly difficult, so it's good to hear that it may not be as hard at it seems...
JD Spydo
Member
Posts: 23725
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Review: original Rescue vs modern Endura

#6

Post by JD Spydo »

One of the older RESCUE models that gets constantly overlooked and many of the newer Spyderville citizens don't even know the model exists and for that reason I wish Spyderco would consider doing a Sprint Run of the older, ATS-55 era STainless Handled RESCUE models ( C-14 & C-45). For about 2 to 3 years now I've pulled one of my Stainless RESCUE models out of retirement and I use it daily as a companion blade to my M-390 Military model.

Also I've found that the older ATS-55 blade steel is excellent for serrated blades. Of all the RESCUE and also many of the other Spyderco "sheepsfoot" models I've found the Stainless handled RESCUE models from the late 90s to be their best RESCUE model ever. That STainless RESCUE model is truly built like a Sherman tank and I do believe you could drop it off of a skyscraper building and it would still be functional.

The Stainless RESCUE is truly one of Spyderco's very best "Lost Classics" in my humble opinion. My first Spyder ever was a stainless handled, Spyderedged, GIN-1 Mariner model and as great of a folder as it was I truly believe that the STainless RESCUE model was even considerably much better than it was.
User avatar
embry386
Member
Posts: 471
Joined: Wed Jun 14, 2017 10:17 pm

Re: Review: original Rescue vs modern Endura

#7

Post by embry386 »

The stainless-handled C14 Rescue -- you mean the gen 2 version, a bit shorter with kind of a chunkier build, with the choil, right? My knife's a C14 Rescue also, but it's from the first generation, with the FRN and no choil and shaped like the Mariner. I'm super into FRN and I like the longer blade so I wouldn't go for a sprint of those second generation ones, but yeah it'd definitely be cool to see sprint runs of some of these older "classic" Spydies. Or even revised and updated versions! I love this knife, but it'd be even better with a flat-ground blade, a handle with the newer aggressive FRN pattern they're using, screw-together construction instead of pinned, and a clip that's not made of plastic. I guess that's mostly just the Rescue version of the Byrd Cara Cara 2, but I want it in a Spyderco version instead of a Byrd version, with the higher level of quality control and the round hole.

Spyderco has produced so many cool models over the years, and discontinued so many of them as well... kind of sad, but at least there's eBay. And it can be kind of fun to hunt for the perfect knife on eBay.

Do you not find the stainless handles too slippery, especially when working under wet conditions, or when it's really hot outside and your hands are sweating? How do you deal with that?
JD Spydo
Member
Posts: 23725
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Review: original Rescue vs modern Endura

#8

Post by JD Spydo »

embry386 wrote:
Fri Jul 27, 2018 2:14 am
The stainless-handled C14 Rescue -- you mean the gen 2 version, a bit shorter with kind of a chunkier build, with the choil, right?

Do you not find the stainless handles too slippery, especially when working under wet conditions, or when it's really hot outside and your hands are sweating? How do you deal with that?
OK here it is again>> The two Stainless RESCUE models that were in the main line up during the very brief ATS-55 Era ( C-14 & C-45) were only avaiable new from the factory for maybe two years max but I'm thinking if my memory serves me right it might have even been about 18 months or so. I do believe that it's predecessor the Stainless handled, Sheepsfoot, MARINER model was discontinued at that point or maybe not too long after. Those Stainless RESCUE models were only made in ATS-55 ( I know because I've owned 3 of them over the years) and as far as I know they were only available in Spyderedge. It seems like I asked "The Deacon" who has an extensive collection of those Spyderco Sheepsfoot models and I believe I remember him telling me that he didn't know of any plain edged units.

The Stainless RESCUE models were rather bulky by comparison but extremely rigid and maybe even the most rigid Spyder ever made IMO. Which is what I love about them. Not to mention they can endure really brutal punishment. And ATS-55 is a great SE blade steel too IMO. And NO I don't find the Stainless handles on this particular model any problem at all because my hands are usually very tightly gripping them during use. Now that's not the case with the Harpy model as I tend to like the Harpy with other handle materials and especially G-10.

Both of the Stainless RESCUE models I have are used therefore only "users" at this point but I believe NIB units are probably getting good collector value at this point. It would be an excellent Sprint Run if it were to ever happen and I'm sure it would draw significant interest. I haven't seen one for sale or trade on BF in probably 3 years or so.
User avatar
Peter1960
Member
Posts: 3689
Joined: Fri Nov 18, 2005 1:54 pm
Location: Austria, Europe

Re: Review: original Rescue vs modern Endura

#9

Post by Peter1960 »

Hi embry386,

The original Rescue is also one of my all-time users, it's best for some gardening work around the house:
Image
Image

And for the sake of JD: :D
Image
Image
Peter - founding member of Spydiewiki.com

"Integrity is being good even if no one is watching"
Spyderco's company motto
zhyla
Member
Posts: 3106
Joined: Tue Apr 20, 2010 2:12 pm

Re: Review: original Rescue vs modern Endura

#10

Post by zhyla »

embry386 wrote:
Thu Jul 26, 2018 2:55 pm
Unfortunately, this plastic clip does nothing to actually hold the knife where you put it.
Yup. My first Spyderco was that same Rescue model and it popped out of my pocket during a paintball match in the woods, never found it.
redhawk44357
Member
Posts: 245
Joined: Fri Sep 24, 2004 10:33 am

Re: Review: original Rescue vs modern Endura

#11

Post by redhawk44357 »

Love the old rescue. Mine has a faded look along the edge from what I have no idea. It pairs nicely with an old delica I have also with the plastic molded clip.
User avatar
lonerider1013
Member
Posts: 570
Joined: Thu Jul 19, 2018 7:06 pm
Location: "On your left!" Yeh I wish

Re: Review: original Rescue vs modern Endura

#12

Post by lonerider1013 »

Very cool bit of history there.
"A fool's blade may be sharper than his brain"
“Learn to ride a bicycle. You will not regret it if you live." - Mark Twain
Post Reply