Page 1 of 2
Native 5 Salt G10
Posted: Sun Apr 15, 2018 6:58 pm
by Sumdumguy
I'm sitting here looking at the Native 5 Salt lightweight, wishing for the exact knife but in full lined, g10 goodness.
Total lc200n construction, like the Caribbean.
Please Sal? Make it happen oh wise one, I will give you all of my pennies!
Re: Native 5 Salt G10
Posted: Sun Apr 15, 2018 8:41 pm
by Sharp Guy
It never hurts to ask but, seeing as they just announced that they're going linerless with the G10 versions, I wouldn't count on seeing a new version with liners.
Re: Native 5 Salt G10
Posted: Sun Apr 15, 2018 9:09 pm
by Liquid Cobra
I’d like to see a salt g10 version without liners. Sign me up!
Re: Native 5 Salt G10
Posted: Mon Apr 16, 2018 4:51 am
by Sumdumguy
They can't take away the lined version can they?! Some of us require a knife that is as stout as possible.
The abuses my knives go through will destroy a linerless knive in days. I tried out an Endura once, it endured 2 days before the handle cracked(exploded?) I switched to a fixed blade, but it was too cumbersome. Finally, I bought a PM2 and have been using those exclusively for the past few years. It is now time to retire the old mule and try out a new blade shape.
I beg of you, don't take the liners away!
#FULLLINERSMATTER
Don't make me call Al SHARPton!
Re: Native 5 Salt G10
Posted: Mon Apr 16, 2018 5:23 am
by Sharp Guy
From what I've heard (read) they're already shipping the linerless G10 S30V base version. Good news for you is they're still going to make the blurple S110V knife with liners. It's not a Salt knife but S110V is pretty stainless and should serve you well.
https://mailchi.mp/spyderco/spyderco-byte-march-2018
Re: Native 5 Salt G10
Posted: Mon Apr 16, 2018 5:36 am
by Sumdumguy
Yea, that's the one im looking at. I'm currently using an s110v PM2, I've been more than satisfied with it. I just want me some lc200n!
Re: Native 5 Salt G10
Posted: Mon Apr 16, 2018 8:54 am
by steelcity16
Sumdumguy wrote: ↑Sun Apr 15, 2018 6:58 pm
I'm sitting here looking at the Native 5 Salt lightweight, wishing for the exact knife but in full lined, g10 goodness.
Total lc200n construction, like the Caribbean.
Please Sal? Make it happen oh wise one, I will give you all of my pennies!
Ditto, that would be the ultimate for me. If there was one knife I could have Spyderco make it would be a full salt version of a fully lined G10 Native 5. I'd love it in translucent dayglow yellow G10 with black/dlc coated liners, hardware, and blades. I LOVE the look of the black against the Jade G10 from BHQ, and I think it would look awesome against the translucent yellow as well. I'd be happy with H1 or LC200N or both. Serrated H1 for sure. Either one in PE.
Re: Native 5 Salt G10
Posted: Mon Apr 16, 2018 12:45 pm
by ZrowsN1s
Liquid Cobra wrote: ↑Sun Apr 15, 2018 9:09 pm
I’d like to see a salt g10 version without liners. Sign me up!
A big +1 to that :D
Linerless yellow G-10, Black hardware, PE DLC LC200N, sold.
Re: Native 5 Salt G10
Posted: Mon Apr 16, 2018 2:07 pm
by Sumdumguy
I don't personally like the black hardware. Just make the liners and hardware plain lc200n like the blade.
Other than that, perfect.
Re: Native 5 Salt G10
Posted: Tue Apr 17, 2018 5:43 am
by Nord
Please no on the full liners. That is where corrosion is most likely to happen, water getting trapped behind liners. And if lc200n is used in the liners as well then at the very least it is one more place to attract gunk.
I have grown to hate liners in general. If G10 or FRN is of sufficient thickness/proper design then there is no need for liners, they add nothing except more expense/complication/dirt attraction. They are not adding the strength people think they add.
Re: Native 5 Salt G10
Posted: Tue Apr 17, 2018 9:10 am
by ThePeacent
Nord wrote: ↑Tue Apr 17, 2018 5:43 am
Please no on the full liners. That is where corrosion is most likely to happen, water getting trapped behind liners. And if lc200n is used in the liners as well then at the very least it is one more place to attract gunk.
I have grown to hate liners in general. If G10 or FRN is of sufficient thickness/proper design then there is no need for liners, they add nothing except more expense/complication/dirt attraction. They are not adding the strength people think they add.
+1 to all that :spyder:
Re: Native 5 Salt G10
Posted: Tue Apr 17, 2018 1:07 pm
by sal
Hi Sumdumguy, Nord,
Welcome to our forum. The question of liners or no liners is always challenging. Difficult, if not impossible to please all.
sal
Re: Native 5 Salt G10
Posted: Tue Apr 17, 2018 1:48 pm
by Larry_Mott
sal wrote: ↑Tue Apr 17, 2018 1:07 pm
Hi Sumdumguy, Nord,
Welcome to our forum. The question of liners or no liners is always challenging. Difficult, if not impossible to please all.
sal
Go for the one you feel is best and let the haters hate. After all your knowledge is worth more than ours combined :)
Re: Native 5 Salt G10
Posted: Tue Apr 17, 2018 6:52 pm
by Sumdumguy
Just make them all!!! :D
Re: Native 5 Salt G10
Posted: Wed Apr 18, 2018 12:48 am
by ugaarguy
Sumdumguy wrote:
They can't take away the lined version can they?! Some of us require a knife that is as stout as possible.
The abuses my knives go through will destroy a linerless knive in days. I tried out an Endura once, it endured 2 days before the handle cracked(exploded?) I switched to a fixed blade, but it was too cumbersome. Finally, I bought a PM2 and have been using those exclusively for the past few years. It is now time to retire the old mule and try out a new blade shape.
I beg of you, don't take the liners away!
#FULLLINERSMATTER
Don't make me call Al SHARPton!
There's always the new Shaman if you must have full liners. Doesn't the G10 Manix 2 also still have full liners?
Nord wrote: ↑Tue Apr 17, 2018 5:43 am
Please no on the full liners. That is where corrosion is most likely to happen, water getting trapped behind liners.
+1 That's what got my Cat and Chaparral four years ago.
Sumdumguy wrote:
Yea, that's the one im looking at. I'm currently using an s110v PM2, I've been more than satisfied with it. I just want me some lc200n!
Can the blades on the G10 and FRN Natives be swapped? If so, you couldn't you make a franken knife out of the two models you want? LC200N blade in the lined G10 handles; coat the liners in Eezox or a similar lubricant, dye the G10 scales - if going blurple to yellow is possible. Certainly you could sell off the S110V blade and yellow FRN handles.
Re: Native 5 Salt G10
Posted: Wed Apr 18, 2018 3:11 pm
by steelcity16
Sumdumguy wrote: ↑Tue Apr 17, 2018 6:52 pm
Just make them all!!! :D
The voice of reason! :P
Re: Native 5 Salt G10
Posted: Thu Apr 19, 2018 2:01 pm
by steelcity16
What is the street date for the Native 5 Salt? Do we know anything yet? Even a guess at a month?
Re: Native 5 Salt G10
Posted: Fri Apr 20, 2018 8:31 am
by jacala
Sometime in June.
Re: Native 5 Salt G10
Posted: Fri Apr 20, 2018 2:27 pm
by steelcity16
Re: Native 5 Salt G10
Posted: Fri Apr 20, 2018 10:21 pm
by Bayoubulldog
I was searching for a spyderco Native Salt today and I see they make one, but it only seems to come in the yellow variant.
I would Love to see a blacked out native salt in LC200N! Serrated... I'd have one on me right now if it existed!
I think the Native is one of the best functioning knives I've found. Good size and shape. Just help me out with the knife I need for my fishing trips and edc in humid South Louisiana!
so far away